It is 256mm tall when assembled
- 0 j’aimes
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇦🇺 Pays du membre : Australie
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Écrivez votre message :
25 commentaires
ola qual o tamanho final imprimindo direto com a sua configuração? se puder responder o mais breve possivel, agradeço
- 0 j’aimes
hello ı write u r gmail. pleas u look because lighthouse
- 0 j’aimes
Bonjour j'ai acheter le phare avec la maison mais la maison est trop grande est ce possible de l'avoir en deux pieces j'adore votre travail si possible de me donner un truc
merci
- 0 j’aimes
Thank you!
- 0 j’aimes
How tall and wide re your light houses?
LIGHTHOUSE
LIGHTHOUSE CABIN
- 0 j’aimes
Hey i was wondering if you still wanted to offer a commercial license please send your email so we can discuss it further
- 0 j’aimes
Hi, sorry I did try to send it previously I guess it didn't work. It's levitonkin(at)gmail.com
(Replace the (at) with @.
- 0 j’aimes
hi! first of all, grate work! I wuold like to know if by buying the chess set stl i will be able to sell the 3d model I print.
- 0 j’aimes
This is possible, are you able to communicate via email at levitonkin(at)gmail.com
(Replace the (at) with @.
- 0 j’aimes
I would like to sell printed models of your light house how much money would you want for me to do that?
- 0 j’aimes
Firstly, thankyou for your honesty - it's appreciated I haven't done this before and think that it would be fair for you to pay whatever you feel is appropriate. All I ask is that you link back to my design if possible and produce them in a quality that holds up to a high standard. Would you like my email address?
- 1 j’aime
Yes please send your email and i will send you samples of our quality and our shop link
- 0 j’aimes
Hi there. I've just bought the lighthouse set and was hoping there was one file with the lighthouse assembled. Is it possible you could share a model of the assembled model so i can print a small one to start? Thanks
- 0 j’aimes
Hey, i could it all for you to print one, I should have it done within 24hrs
- 1 j’aime
I'm not sure why this didn't post earlier but yes, I'll one shortly, it's solid however and I don't recommend printing it as the main as some pieces print with a different orientation normally.
- 1 j’aime
Can you think of some way to make the beacon rotate ?
- 0 j’aimes
Hi I made the lights rotate on my own by programming via arduino.
- 0 j’aimes
Hello, I just purchased your Lighthouse Cabin, and am excited to print it. My question is what leds did you use to light it up? Looks like you potentially made it, I'd love to know how you and what you used. Thanks!
- 0 j’aimes
Hi thankyou so much for the purchase! I certainly did print it and I lit it using ws2812 led strip which means I can configure the colours or animation via arduino. Please let me know how you go. If you have any difficulty with your print me and we'll see what we can do. Thanks again.
- 0 j’aimes
Could I get the step files to make modifying for different lights easier? Thanks!
- 0 j’aimes
Dear Levidt, please could you send me the files of your firecracker Cannon? My e-mail [email protected]. thank you so much. Lukas
- 0 j’aimes
Dear Levidt, please could you send me the files of your firecracker Cannon? My e-mail [email protected] thank you :)
- 0 j’aimes
Hey can you please model XT60 connectors? :)
- 0 j’aimes
Hey, I have seen your work here with another DC connector and love it. Any plans to make it available? I'd love to purchase it too!!
- 0 j’aimes
Fantastic. Thank you so much!
- 0 j’aimes
Stupid website. It didn't appear to accept my message and then sends it about 10 times! I really did appreciate your change, though.
- 0 j’aimes
Would there be any way to obtain a version of the file Base Rail.stl from your Lighthouse model - https://cults3d.emulatorsite.com/en/3d-model/home/lighthouse-levidt#_=_ ? I am find it very problematic to print on my one printer that has a large enough bed, and would benefit greatly if I could print it in 2 pieces on a different printer that I have. I am trying to avoid scaling it down.
- 0 j’aimes
Hi!
Can you please stop selling my design of the Pill Keyring Container you ed from Thangs?
Thanks!
- 0 j’aimes
I absolutely did not.
- 0 j’aimes
Can you show me screenshot of the model in the software you used to create it then? I don't need the file.
- 0 j’aimes
- 0 j’aimes
Ok. Guess it was just very heavily inspired.
- 0 j’aimes
I never saw your own. Thangs is not a site I use. It's a simple design and is going to come up naturally. Cheers.
- 0 j’aimes
Then you'll not mind is I sell my own design.
- 0 j’aimes
Not at all. I haven't yet looked at yours, I will when I get time but I think it's impressive to independently have the idea for the same concept. All the best.
- 0 j’aimes
Salut, j'ai une petite question. Je crée pas mal de porte-clés et d'objets, mais je n'arrive pas à avoir des photos comme les tiennes. Comment fais-tu ? As-tu un arrière-plan acheté quelque part, ou est-ce toi qui l'as créé ?
- 0 j’aimes
Hi, please see your email.
- 0 j’aimes
[email protected] thanks
- 0 j’aimes
Hey , hope you are well . I just started printing this . The door handle is MASSIVE in the stl . I have reduced it to 10% and that looks about right . Just a heads up .
All the best
David
- 0 j’aimes
Hey thanks for the message David, I'm not sure why I'm getting that glitch, I can't seem to sort it even with help! 10% is the correct scale to be printed at. I will make this clear in the description. Thanks for the purchase.
- 0 j’aimes
Hey man- is it just me, or is the provided door handle for the lighthouse way too big? It's about 1/2 the size of the entire door when I pull in into Orca- I can fix it, but just thought I'd let you know... thanks for a fantastic model!
- 0 j’aimes
I got it resized and can send to you if you want- just let me know how to get it to you.
- 0 j’aimes
Hey man cheers for the message, for some reason when I export the file it screws up between inch sizing and mm sizing, not sure why when the rest of the files dont have this issue, my slicer can accomodate for this (simplify3d) but as far as baking it into the actual stl at that size, I can't manage to do it. I would appreciate it if you could share how you managed to fix it? My email is [email protected]. Thanks.
- 1 j’aime
Sent!
- 0 j’aimes
Hello. I want to print your firecracker cannon, but the barrel of the cannon is incorrectly oriented sitting off the build plate at an angle. What orientation should the barrel be printed in? Cura slicer also says that there is some sort of corruption in the stl file for the barrel. If you've printed it before then I guess ill just ignore the warning. Please let me know. Thanks. I am using a 220 by 220 bed.
- 0 j’aimes
Hey mate, I'e just ed a reorientated version for you, If you come across this again I recommend using Microsoft's 3D Builder for quick fixes.
Be careful and make sure you screw the cannon together tightly!
- 0 j’aimes
Ok thank you. I already reoriented it in cura so that it was printed with the tip of the barrel on the build plate. Hopefully it comes out ok. Thank you for fixing that though. It looks like a great design especially with the bullets and rifled barrel. I am printing it at 95% Infill. Thanks!
- 0 j’aimes
Oh, and did you mean to use Microsoft 3d builder for fixing the orientation or fixing a corrupt file? Thanks again.
- 0 j’aimes
Both.
- 0 j’aimes
Great. I ed it. The barrel is at 75% and looking good so I guess there wasn't any major issues with the stl. Thanks.
- 0 j’aimes
Hi LEVIDT, just wondering if this version includes the softer bristles you mentioned? Many thanks!
- 0 j’aimes
Hey there thanks for the purchase, I've just updated the design now.
- 0 j’aimes
Hi there for your folding batarang. what screw did u used to connect all 4 parts ?
- 0 j’aimes
Hello, I bought the Leuturm from you, unfortunately I only have a build space of 220 x 220 mm, can I scale it to fit?
Absolutely that will work fine and thank you!
I'm away from the computer at the moment but load the biggest piece in, and scale it all based off of where that needs to be.
I'd love to know how you go.
Levi