👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇺🇸 Pays du membre : États-Unis
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Hello, the arms on the "Finnish Icebreaker bear"
file, at least the crouching pose that you feature painted are popping right off with barely any pressure when I try to remove the s. Seems like the walls on the shoulders are super thin.
I just ed a new version of it. I didn't see anything wrong in the slicer and mine doesnt have that problem. I pushed the shoulders further inward to increase surface area of so hopefully that helps.
I ed your Jade Emperor Remix https://cults3d.emulatorsite.com/en/3d-model/game/jade-emperor-remix-orfey . Unfortunately the file is...faulty. When sliced some of the shapes are hollow, most notable the knees and armour plating on the legs and the head so the file does not print well.
If matters, I am using Chitubox
I answered under your comment on the design.
In short, ed a repaired file that should help. The issues are with the base file I tweaked so not much else I can do without remaking the whole thing
https://cults3d.emulatorsite.com/en/3d-model/game/vortex-mecha-multipart Can you provide some sort of word clue in your write ups. So we can id these for record sheets. If its to far from the name. Then it means a lot of extra searching. Or asking others.
Pro-tip, on the right side of the design there's a section titled "3D Design Format", you can click the little arrow to expand the list of files included, the .zip should match the real btech name. Maelstrom in this case
As someone just starting in Battletech these bases are great for helping me as I learn the different mechs. I'm in the process of getting all the current Catalyst mechs for my faction and came across some missing bases.
Axman
Caesar
Charger
Enforcer
LRM Carrier
Marauder II
Patton Tank
Skulker Wheeled Scout Tank
Spector
SRM Carrier
SturmFeur Heavy Tank
Victor
Vulcan
Warrior Attack Helicopter
Great! They're super helpful for me, though I've stopped basing my vehicles mostly for storage reasons so I have to paint the name underneath.
I added the warrior, but have you checked out my flight base? I have magnetic nameplates for all vtol/aerospace so you can reuse just a couple flight stands
Thank you, and I hadn't seen the flight bases before. I'll have to print some of those out now as well.
Hey Krom, curious if you were gonna do any variants for any of your mechs would love to see a Mastodon "D" I like to field specific variants on the field. I know there is a "D" out there but I would perfer to have the chassis from the same sculptor if they are from the same era
Funny you should ask. I just used a mastodon in my game last night and was considering coming back to do all the variants. I think I'll make it my next priority, won't be for a couple weeks though.
If you havent bought any of my newer designs, I do every variant, usually in multipart so they can be magnetized
awesome. Curious how its going with the variants. Was hoping to print a few for my gaming group for Christmas
Was finishing up a few long running projects and commission, I should be able to get to it next week!
Starting these now, should be able to get it done this week
Hey Krom, I'm the modder behind the Classic Mech Collection for Mechwarrior 5 and I'm looking into modding your amazing Rifleman IIC and maybe Kodiak into the game? I'd of course link you as the creator, link to your Cults3D and your Donation page. Would that be cool with you? If it's easier to chat instead of over the comment section here, let me know if you have a Discord or e-mail to you over.
And of course, thank you for the great work you do and for taking the time to respond.
Absolutely! I love your mod work, feel free to use other stuff too. I've done plenty of other detailed versions of the video game assets like the MW2 warhammer IIC
If you want to chat more you can email me [email protected]
Hallo würdest du mir evt einen sockel mit Times Eagles anfertigen ???
Is "Times Eagles" a font or the text you want on the hex base?
eine neu hex base pls
Sorry missed your comment, added it here https://cults3d.emulatorsite.com/en/3d-model/game/mech-and-vehicle-nameplate-bases filename "_request_times_eagles"
How would you feel about a wolfhound 5?
Most of the miniatures/images of wolfhounds make it look really scrawny... I know it's a light but come on. This image of the 5 makes it look more like a threat.
https://cfw.sarna.net/wiki/images/1/12/WLF-5_Wolfhound.jpg?timestamp=20101214124505
Unfortunately I don't have a clever name for this one though.
No promises anytime soon, but It'll go on the list. Right now I was taking care of a few models I needed and some for a friend of mine.
Not a problem at all. Thank you for even considering my requests.
Amazing stuff. Any chance of an anubis? You could call it the egyptian wiener dog.
Thanks! I'll add it to the ever-growing list. I'm pretty happy with cato's version though so it wouldn't be for a long time https://cults3d.emulatorsite.com/en/3d-model/game/6mm-mech-anubis-all-variants
Look forward to an amazing (imo) trebuchet coming in the next week!
Cool. Thanks for the link.
Also... while I like the anubis in the link too... I was kind of hoping for a more this look anubis (kind of like a light mad cat)
If not no worries. Thanks again for your time and consideration.
Maybe even with hands?
In the nearish term I wanted to do some more classic capellan designs. I'll use that artwork as the main inspiration for the anubis. Will probably also do duan gung since I don't have many lights. Hopefully a cataphract too
Sweet
This one's dropping in a day or two, I think you'll be really happy with it. And yes the 3MC has hands lol
Great job on the Osteon! Is there any way I could convince you to do up the Septicemia and Cephalus to go with it?
Thanks! Septicemia has been on the list forever since I can just copy the legs. I'll add the cephalus too. Won't be for a long time though
I'm looking forward to it!
Hi! I love your Ghost bear models like the Rime Otter, would you be interest in doing an updated Grizzly in line with the current art? Thank you!
Thanks! Probably not since there's a few out there that I really like. In particular l, redline workshop has a good one and there's a mechwarrior 4 version I think from blaar
Hi there, im currently on film school and Im about to make battletech stop motion short movie, and I would love to implement your model of kodiak there (alaskan bear), Unfortunatelly I couldnt separate the parts of the model for posing it, my plan is to print it in 100cm height and add the ts between the moving parts to make it poseable, If you could send me the dismantled model I would be more than happy - my email is [email protected] - of course you will get all the credits in the movie and I will send it to you when finished. Im looking forward to your response
Very cool! I'd be glad to. I'll get the model to you today or tomorrow
Thank you
Hey, I purchased your 'Finnish Icebreaker Bear' model and noticed the painted example picture is posed differently than the one in the . Would it be possible to get a copy of the model in that pose as well?
Hey thanks! Somehow you're the only one to have noticed, it should've been there all along. Added the other pose
Awesome, thanks. The models look great by the way. You're the only one I've seen with a model that looks like the art for that particular mech.
Thanks! I appreciate it. It was one that looked awesome and as soon as I read the stats I knew I needed one. Even more so since it was both a bear and a capellan mech
Lovely models especially the classic video games versions. Any chances of a MW2 inspired Phoenix Hawk IIC?.
BTW I have all MW2 extracted models in case you would like to have the files.
Thanks! I don't have any plans for it. All my mw2 ones will probably be from mw2 and ghost bear since those are the ones I grew up with. I think I do have all the file, I'll hit you up though if I find I'm missing one
Can i make a cool mech request?
Sure, no guarantee I'll get to it ;)
Primitive banshee with the screaming deaths head
Are you still working on a primitive banshee?
Nope havent looked at starting one
Gotcha
Hello,
Protomechs: Centaur, Roc, Gorgon, Minotaur, Procyon Quad, Chrysaor, Basilisk Quad, Hippogriff, Boggart Ultra, Svartalfa Ultra, Sprite Ultra, and Hobgoblin Ultra
Mechs: Dominator, Sojourner, Hierofalcon, Thresher, Hammerhead, Linebacker, War Crow, Goshawk, Crucible, Ion Sparrow, Carrion Crow, Firestorm, Storm Wolf, Amarok, Eris, Iron Cheetah, JAde Phoenix, Doom Courser, Alpha Wolf, Ryoken 3, Pouncer, Wraith, Penetrator, Night Sky, and Devastator
Alright let me know if I made any mistakes
Appreciate the info.
Love your models... In another forum someone posted a pic that looks like one of yours. Did you have an Emperor available?
Ah, no. The paint job was mine but the model is from @LtShade (I got it from him directly maybe?) . He's revisiting models and posting them here so it'll be along at some point. I think it's next after the avatar.
Would uou ever make the ursus mech?
Yeah at some point I want to get around to detailing blaar's model https://3dwarehouse.sketchup.com/model/611c2f23e029e8038f012e721fb92cd5/Ursus-Battlemech
Well i'm hyped
Ended up doing it this weekend!
Didn't know the torso twisted tbh, always looked fixed
Really like your bear inspired stuff. I think there's another finnish bear design that would really be a great addition to the line. Any ideas about adding a heavy weight design that also has claws like the finnish design?
Thinking of the Karhu? That's on my list for someday
The mechs
Hi,
Want to use these for Wiley's Battle Suit Alpha. Can you identify these into two clans?
Which file are you referring to?
Hello, I was wondering if you were willing and able to make those flat topped nameplate bases for a Stygian (the hover tank), Bulldog, Demolisher (not the Demo II), Scorpion and Po II. I haven't had much luck finding nameplate bases.
Added them, let me know if you have any issues or other requests
That was only 2 of the 5 I asked about. It's all good though. I'm going to research how to make them. I had a look at your how to and that only helps if you know how to use blender in the first place.
Fixed it, looks like cults is having trouble when I multiple files. Some of them got stuck in the 'ing' state and didn't save
Good luck making your own! I'd love to see them posted if you get it figured out
Hi, luv this mech, but i can't get lychee to slice it, keeps saying it has to many holes, I tried using mesh mixer to repair it, but still keep getting the same result in lychee, my modelling knowledge is not that advanced to to fix this, any chance you can do an update on it, cheers.
I don't see this message linked to a design, which one are you referring to?
Hi there! I think JagerWulf might be referring to the Mastadon. I was having similar issues with the model with Lychee. When I went into MeshMixer, following the instructions for the "Inspector" feature, I went to "minimal fill" and set the small threshold to 0mm; I then selected Auto Repair All which seems to have worked? Zero experience here. After I exported it to Lychee, it came up with errors but after selecting Object Repair it looks like the errors have been fixed.
I haven't tried to reprint it yet.
I ran the files through netfabb's repair and ed them. Let me know if those have the same problem
Love your new Liao themed designs, loaded up on most just now. Any chance for a Victor?
Sorry, not anytime soon. The mwo look is fine enough for my needs so it's really low on the list
What sculpt do you use, if you don’t mind sharing?
I think I have one from syllogy printed, but if I ever needed a new one I'd probably use this one: https://cults3d.emulatorsite.com/en/3d-model/game/american-mecha-viktor
Or the one I used as the basis for the lu Wei Bing: https://cults3d.emulatorsite.com/en/3d-model/game/american-mecha-winner-game-version