salut magnifique model mais pourrais tu m'envoyer un maximum de photo des étapes de construction a mon adresse mail:
[email protected]
- 0 j’aimes
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇬🇷 Pays du membre : Grèce
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Écrivez votre message :
26 commentaires
Hi bitte den Kauf Stornieren keine Anleitung liste oder sonstiges dabei
- 0 j’aimes
Hi thanks for your mail! I have only a video with photos step by step it’s easy to build it! But ok you can ask for refund if you like.
- 0 j’aimes
ja bitte um Rückerstattung beider Käufe danke
- 0 j’aimes
Bonjour, j'ai acheté votre pelle. Très beau modèle et bravo pour votre travail.
Avez-vous une notice de montage ou éventuellement des photos de l'assemblage ?
Je vois que le châssis est en deux parties mais je ne comprends pas trop pour assembler les deux parties par exemple.
Merci a vous
- 0 j’aimes
Hi! Thanks! I have only a video with photos! The chassis I use 4 screws 3mm without screw head and glue! Give me your e mail to sent you photo.
- 1 j’aime
Ho thanks. You can send me a email to: [email protected]
Thanks a lot
- 0 j’aimes
and do you have a video or pictures of how to build it step by step. and a link with parts to buy for the electric version. my mail is Andershob@gmail,com
- 0 j’aimes
hello. Bought the Volvo BM840 from you now, do you have a link with parts I am going to buy, I want it electric. Regards, Anders
- 0 j’aimes
Hi! Thanks. I have all the links you want in the description below.
- 0 j’aimes
Mate nejaky planek na to jcb
- 0 j’aimes
Hi ! no my friend! I can sent you photos if you like!
- 0 j’aimes
Dobře, a je to cely model
- 0 j’aimes
Yes but you have to buy the electronics, axle, tires !
- 1 j’aime
Je to 4×4
Elektronika meni problem
- 0 j’aimes
Ja delam rc zetora 7745 s vlekem a chtel bych k tomu nejaky bagr tak proto se ptam
- 0 j’aimes
a poslete prosim nejake ty fotky
- 0 j’aimes
No this is 4x2 ! Send me your e mail to share photos!
- 0 j’aimes
Dobre poslu
- 0 j’aimes
- 0 j’aimes
Pak bych se s vama po emailu domluvil nebo zeptal co za sroubky a jine veci na to potrebuji
- 0 j’aimes
Total cost with electronics,axle,tires,hydraulic system transmitter battery is about 900-1000 euros! In October I will design this JCB in 1/14 scale with leaner actuators and the total cost to build it will be about 500 euros!
- 0 j’aimes
A jak je vyrabite pres 3d scanner??
- 0 j’aimes
No, I take a photo of the model I want, put it in the dimensions I want, and then I measure it piece by piece and design it!
- 0 j’aimes
Aha
- 0 j’aimes
Mate je vsechny pekne
- 1 j’aime
Hi.
Bought and printed most of the parts for the Volvo 840, but struggeling a bit to build it from the pictures here on cults. Any chance of some instructions?
- 0 j’aimes
Hi thanks! I can sent you photos! Sent me your e mail.
- 0 j’aimes
[email protected] Many thanks :)
- 0 j’aimes
[email protected] Many thanks :)
- 0 j’aimes
Hallo
gibt es für den Liebherr 924 eine Ersatz für die Achsen die sind nicht mehr lieferbar,
vielen dank
Thorsten
- 0 j’aimes
- 0 j’aimes
I had a question about your jcb 3c model. What motor did you use for the swing operation of the backhoe?
- 0 j’aimes
Just found this amazing item on AliExpress. Check it out! €25.13 | 2PCS motor reductor 12v 25mm Diameter Gearbox DC12V 12RPM to 1360RPM High Torque Gear Motor Speed Reduction Geared Motors
https://a.aliexpress.com/_EIttqRl
- 1 j’aime
Perfect thank you
- 0 j’aimes
Merci pour les photos !👍
- 0 j’aimes
Afternoon, is there a build sheet for this ? I have it all printed out but cannot find any build instructions or parts list.
Thanks :)
- 0 j’aimes
Hi my friend! I don’t have! But if you like you can sent me your e-mail to sent you some photos! If that helps you!
- 1 j’aime
- 0 j’aimes
[email protected] mi puoi mandare anche a me le varie foto
- 0 j’aimes
I bought these pneumatic cylinders but at the very other end of where the lifting/retraction happens I see no place to connect the cylinder to the machine.. how is this made do you bore a hole with a drill yourself? Or how do you do it?
- 0 j’aimes
Hi! I made a hole myself !I can sent you a photo sent me your email if you like !
- 1 j’aime
Yes yes please! :D [email protected]
- 0 j’aimes
Ok I sent you a photo!
- 0 j’aimes
Merci pour le retour!!👍
- 0 j’aimes
Salut jimraptor!! je t'es télécharger la liebherr
Question je comprends pas ? Les verrin Ce sont des pneumatiques et non hydraulique ? Ta pas de fuite avec ?
- 0 j’aimes
Hi! The cylinders are pneumatic but working with hydraulic system! I already tried it!
- 0 j’aimes
But, does your model come with the instructions that includes all of those details? Based on the comments it seems like some of the details were left out. I looks great in the video but I'm having a hard time wanting to buy a model and the not be able to complete it because the details are missing.
- 0 j’aimes
Your first cylinder listed isn't available on Aliexpress, is that correct size?
Also, I don't see any instructions in the ZIP file nor do I see what supplies the air for the cylinders.
- 0 j’aimes
Just found this amazing item on AliExpress. Check it out! €3.75 | Pneumatic Air Cylinder Stainless Steel cdj2B10 Type Mini Double Acting Single Rod 10mm 16mm Bore 10~150mm Stroke CDJ2B16
https://a.aliexpress.com/_EwFW0mr
- 0 j’aimes
I use hydraulic pump and hydraulic valve
- 0 j’aimes
- The link above doesn't work. Regardless, the cylinder you list on your notes is not listed as available by Aliexpress.
- Does your model come with the instructions that includes all of those details? Based on the comments it seems like some of the details were left out. I looks great in the video but I'm having a hard time wanting to buy a model and the not be able to complete it because the details are missing.
- 0 j’aimes
Hello, do you have any other photos or plans of your liebherr 924? I would like to your files but I don't see how the balance axle is attached to the blade side, thank you
- 0 j’aimes
Hi I sent you on messenger!!
- 0 j’aimes
Hi, I have purchased the filesfor the jcb 3c, they dont seem to be complete... it seem to be missing a few parts.
would it be possible to have an assembly video, or at least a f3d file to see where the parts go.
also, some parts are not pierced and/or don't fit properly.
I'm really looking forward to building this model!
- 0 j’aimes
Bonjour, l'engin est il fini et avez vous des vidéos de montage et de fonctionnement ?
- 0 j’aimes
Hi the JCB or Liebherr?
- 0 j’aimes
Hello the tire you link too is not moore what can i use then?? And do i need to get the expensive rc controller
- 0 j’aimes
Hi thanks for your message! I change the link! And for the radio I recommend this one
https://a.aliexpress.com/_EHDxYct
- 0 j’aimes
Hello,I just ed the files for the job 3c and I’m going through the files included with the purchase. I saw this backhoe on YouTube and it was four wheel drive. Is there a front axle and transmission recommendation for this. Also are linear actuators used to lift the rear? Or is it threaded rod and a gear motor?
- 0 j’aimes
Hi! JCB 3c isn’t 4x4 ! These files are for 2x4! And for the lift I use a hydraulic system!
- 0 j’aimes
Hello,
I would like to know what type of hydraulic pump and what type of valve you use for the JCB and where to buy this material. I am a beginner in this field but very interested. the rest of the material is easier to find.
Thank you in advance.
jean-paul
- 0 j’aimes
Hi! The hydraulic system I bought from magomhrc.com you need a pump with tank, 5 way hydraulic valve 2 way hydraulic valve 3mm tube about 10 meter!
- 0 j’aimes
Bonjour,
pourriez vous m'indiquer les paramètres d'impression pour votre JCB. hauteur de couche, nombres de périmètres, remplissage !!!
je pense l'imprimer en petg .
d'avance merci de votre réponse
jean-paul
Hello,
Could you please tell me the print settings for your JCB. layer height, number of perimeters, filling!
I'm thinking of printing it in petg.
Thank you in advance for your reply.
jean-paul
- 0 j’aimes
Thanks for your message!
I use pla 205/50
Layer height 0.15
Shell thickness 3
Bottom/top thickness 3
Fill density 40%
Print speed 50
Thanks!
- 1 j’aime
Hello, I bought the files of the Volvo BM 840, I need some clarification, what diameter do the wheels have, on AliExpress there are various sizes, if you can give me the right sizes, for front and back, I have a lot of difficulty ing the files, why didn't you make a single file, however a fantastic model, thanks for your availability and courtesy regards Luca
Hi thanks! Front 2.2 (127x40mm)
https://a.aliexpress.com/_EJQE71U
Rear 1.9 (105x37mm) TN1008
https://a.aliexpress.com/_Ey4F8Oa
Thank you very much, very kind