Aller au contenu
JadeAndHerBrush
@JadeAndHerBrush
Compte certifié
Que signifie le symbole « Compte certifié » ?
Compte certifié
Partager ce compte

ALL MY MODELS ARE FOR COMMERCIAL USE ✨️
Oh, hello there! Mum of two little ones, dog owner and ragdoll owner. I used to paint and sell furniture along with working with precious metal clay, which both have helped me in developing my 3d modelling skills and painting.
I have also worked in the kitchen deg field for a while before having my kids.

I hope you like my designs 😊💕

Curateurice Influenceur·euse Vendeureuse Téléchargement Designer Populaire

👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇬🇧 Pays du membre : Royaume-Uni
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible

Écrivez votre message :

20 commentaires

donna-lakin
donna-lakin

Hi, I purchased the dragon cage file . I printed the door and its a huge solid door. I then printed the cage and it is much smaller. the door file does not look like the one on your picture, do I have the wrong door file ?

  • 1 j’aime
JadeAndHerBrush
JadeAndHerBrush

Hello! When did you the file? As when I first ed it, I ed the wrong door file then replaced with the correct cage door! Sorry about the muddle up 😅
needlestoknots
needlestoknots

Tried 2 different printers.. there is a problem with settings on this

JadeAndHerBrush
JadeAndHerBrush

Hello what model are you referring too please?

needlestoknots
needlestoknots

the Cage

JadeAndHerBrush
JadeAndHerBrush

What problems are you having and what are your print settings ?
as its most likely the settings and needing to calibrate your printers in ☺️

needlestoknots
needlestoknots

the bottom of the cage inside the pattern does not cover the entire bottom, also will def need s as the top quality inside is not very smooth , and door . I am running Bambu P1S. Love the design !

JadeAndHerBrush
JadeAndHerBrush

The design is only ment to cover partially on the bottom that is part of the design ☺️ and the cage can be printed with no as mentioned but will need some slight clean up but if you'd like a clean finish then is recommended ☺️ thank you! X

needlestoknots
needlestoknots

ok Thanks for such a quick response!

JadeAndHerBrush
JadeAndHerBrush

You're very welcome ☺️x
CarusimaHikura
CarusimaHikura

For the cage, I can't seem to find the hinge rod?

  • 1 j’aime
JadeAndHerBrush
JadeAndHerBrush

Hello just added sorry about that! Mum brain today 😩

  • 1 j’aime
fitnessmom2
fitnessmom2

Hi I purchased the cage stl and there’s some issues with it
Door doesn’t fit and causes hinges to crack and cylinders for door don’t fit

JadeAndHerBrush
JadeAndHerBrush

Hello! Giving the hinges a quick file down/ sand down will help them slot in.

You can also use wire or some filiment to hold the hinges in place. The cylinder has very small tolerances so any filiment in the hinge hole will stop it going in. I hope this helps. Let me know if you are still having issues x
cop303
cop303

Sorry traveling for work so I have not had a chance to look at it. Will check it out when I get back next week.

  • 1 j’aime
cop303
cop303

I will look at it again and let you know.

  • 1 j’aime
JadeAndHerBrush
JadeAndHerBrush

Any luck or help needed? 😊
cop303
cop303

I will give it a go and let you know.
cop303
cop303

I will look at it again and let you know.

  • 1 j’aime
cop303
cop303

I will look at it again and let you know.
cop303
cop303

No it was the cat

JadeAndHerBrush
JadeAndHerBrush

Okay I've double checked the cat and there are no layer holes, only gaps where the ts are needed but it's all ted together. I have printed multiple tests out of these and am certain. But if you need any help figuring out your slicer let me know. Also possible try another slicer? Are you printing fmd or resin? This piece has been tested for fmd prints only. Hope this helps!
cop303
cop303

my software for my adventurer 5m tells me that there are spaces between lines 22 to 243 and cannot be printed. i would like a refund for my purchase.

JadeAndHerBrush
JadeAndHerBrush

I have done a screen record layer by layer of the model on my slicer to show you there are no gaps in this model. I can message you the video if you would like. If you'd like any help trying to figure out why your slicing software is messing around I can try to help the best I can,but it definitely isn't the model at fault.

JadeAndHerBrush
JadeAndHerBrush

Hello! So I think you have my model confused with the articulated dragon model you brought. I checked on your profile and can see similar issues on the dragon file by multiple people!
Pix0pat
Pix0pat

Hey! Thanks for the follow! 🎉

🎁 To welcome you, enjoy 10% off all my models with the code: BIENVENUE10 🎁

Feel free to explore my creations here:
👉 My Cults3D shop

See you soon for more unique designs! 🔥
Pix0pat

  • 1 j’aime
NirNova98
NirNova98

Hi there! 💫

Thank you so much for following my page! Your means the world to me. 😊

By following me, you’ll stay updated with all my latest s and get exclusive coupons just for my followers. 📢🏷️✨

If you have any , suggestions, or specific models you’d like to see, don’t hesitate to reach out. Your input helps me create better content that resonates with you and others. 🚀

Feel free to explore my current models, leave likes, comments, and even share your prints by adding a ‘make’ of the print. It’s always inspiring to see how others bring my designs to life! 🖨️

Thank you for being a part of my creative journey! 🎨

Best regards,
NirNova98 🌌

  • 1 j’aime
Trystra
Trystra

Hey I like your taste

JadeAndHerBrush
JadeAndHerBrush

Thank you! 😊
NirNova98
NirNova98

Hello there! 🌟

Thank you for liking one of my models—it means a lot to me! 😊
If you enjoyed that model, I invite you to explore more on my page. Who knows, you might find others that you like just as much! 🛒
Feel free to leave likes or comments on any models you enjoy—it helps me improve and create content that resonates with you. 🚀
Also, if there's something specific you'd like me to create, let me know! 🎨

Don't forget to click the FOLLOW button to stay updated with my latest creations and receive exclusive coupons that only my followers will get! 🏷️✨

Thanks for your !

Best regards,
NirNova98 🌌
nancyclayton
nancyclayton

Hi. I just bought the monkey wall hook as I saw it on a 3D printing page on facebook and loved it. The thing is I’m new to this. I’ve got a creality ender3 v3 se and when I put it into the cuts slicer nothing comes onto build plate except a spec. Help please

JadeAndHerBrush
JadeAndHerBrush

Hello! Oh I think what you need to do is press scale on the side of the slicer software and scale it up by 1000 or something! (The model was designed in a sculpting program that doesn't have units so it can be really tiny on some slicers and needs making bigger ) he's there somewhere on your plate, hope that helps and thank you for ing 😀

  • 1 j’aime
sherynh
sherynh

the design number is 2188568 that i cant seem to open? am i supposed to some sort of app to it?

JadeAndHerBrush
JadeAndHerBrush

Hello! Sorry about that I will the other stl file for it. Not sure why it wouldn't work!

JadeAndHerBrush
JadeAndHerBrush

I've just realised you may need to scale him in slicer. If nothing appears when you open it, it's there but just really tiny as I created it in a software that doesn't use units of measure so needs scaling!
sherynh
sherynh

hello,i ed this file but cannot seem to open in on crealty print

JadeAndHerBrush
JadeAndHerBrush

Hello! Sorry about that I will the other stl file for it. Not sure why it wouldn't work!

JadeAndHerBrush
JadeAndHerBrush

I've just realised you may need to scale him in slicer. If nothing appears when you open it, it's there but just really tiny as I created it in a software that doesn't use units of measure so needs scaling!
grandma2-
grandma2-

Hi Jade, when I down loaded the Monkey Hook it is very ting on the slicer...... 2.0mm it is like a microdot on the slicer. Please advise, Thank You!!

JadeAndHerBrush
JadeAndHerBrush

Hello you will need to scale up to about 3000% or enough to cover your build plate, the sculpt software I used doesn't work in measurements so you have to apply that in slicer 😄❤️
PLP
PLP

Bonjour. Merci pour le suivi. Cordialement.