Love the design but is there a stl file
- 0 j’aimes
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇳🇿 Pays du membre : Nouvelle-Zélande
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Écrivez votre message :
396 commentaires
What design?
- 0 j’aimes
Hi.
I did go and it again but if you scroll down to the erea where it says EXSTRAS 3to 4 under that the V6 file if you open it and go down to the coaster the file is empty
- 0 j’aimes
I need to know exactly what version you bought, as I have a few. Please paste the link to the listing here so I can fix it
- 0 j’aimes
I have the same issue listing is https://cults3d.emulatorsite.com/en/3d-model/home/v8-can-cooler-holder-no-s
- 0 j’aimes
Thanks, the piston coaster is there, I just checked. I sent you the file as an email too
- 0 j’aimes
Hi i did it again but the folder V6 3 or 4 down from exstras if you open that file to exstract the file the only thing that opens up is the file and then when you go down to piston coaster where it says coaster the file opens up but is EMPTY
- 0 j’aimes
I recently bought the engine cooler file with the piston coaster but dont see the file for the piston coasters. Wondering if I can get the file
- 0 j’aimes
Hello. What version did you get? I can see the file for the mini can coaster. There is no version for regular can
- 0 j’aimes
I bought the bundle package that has the v4,v6,v8 regular and mini versions. I dont see the piston file included in the zip folder.
- 0 j’aimes
I dont think I have a listing for those 3, can you post the link? Also your email so I can send it to you
- 0 j’aimes
hi i am syill waiting for on the engine coolerbox. the folder that contains the file for the coaster of the pistons is empty and i can not find the files for slicing to be printed. please can you assist me so that i can go on and finish the coasters. please sir
thank you
hendrik
- 0 j’aimes
Hi, can you please the files again? This is probably a issue
- 0 j’aimes
Hi i bought the coolerbox from you. Know i bussy with it to be printet and what i have noticed is the the file with the piston coaster is empty, can you please send it to me.
[email protected]
My order number is 124265042
Hendrik Mienie
Thank you
- 0 j’aimes
"https://cults3d.emulatorsite.com/en/3d-model/home/vintage-lantern-candle-holder-set-no-s" Do you give permission to use this product for commercial use after purchasing it?
- 0 j’aimes
Hi, I don't give permision to sell any of my models (It says so at the end of all of my models) unless you are an active subscriber of my Thangs or Patreon 😁
- 0 j’aimes
Okey :) So, if we get hip from Thangs or Patreon, we can use the products we like commercially. Is it true?
- 0 j’aimes
That's right, for as long as you are a member on the commercial tier (There is a non commercial tier on Thangs too) you can sell your prints :)
- 0 j’aimes
That includes any of the 300 models I got available
- 0 j’aimes
How did you do the eyes on the ninja turtles
- 0 j’aimes
They are glass eyes, it's linked in the included PDF. Then they pressure fit on the eyes
- 0 j’aimes
Hi I’m looking at buying this file however I noticed you already had s etc will this be ok for Creality print? Or will I need to add my own s thank you
- 0 j’aimes
Hi, thanks for your . You can use these files with any printer, but if you want the pre ed files then you have to use Orca Slicer or the Bambu Slicer. That or add automatic s
- 0 j’aimes
LOL In case you're wondering, I was trying to buy a different file but yours was the last one I bought, so I apparently bought it twice. I'm a Patreon subscriber - so warm/no foul. Consider it a tip. I appreciate you. :)
- 0 j’aimes
No worries thanks :)
- 0 j’aimes
hi i have purchased the TMNT file its brilliant absolutely love it! do you have it in a smaller scale by any chance? as it keeps crashing my pc when i try to load it into my slicer
- 0 j’aimes
Hi, thanks for your . What file is crashing? Did you try the factory files?
- 0 j’aimes
when i try to load all the files for the TMNT. some load and when i see the heads they are the size of my build plate so was wondering if you had a smaller scale?
- 0 j’aimes
Oh I see. You can scale them down as you need. Load the lid files first as they are bigger than the heads and check whats the max size you can print. Then scale everything down
- 0 j’aimes
ok i will try that :)
- 0 j’aimes
i am struggling to get all the parts for the lid to scale to the same size as some parts are at 100% and some are at 92%
i am wanting to scale it all down to 25%
- 0 j’aimes
Try the STL, it should be 100%
- 0 j’aimes
thats worked perfect thank you
- 0 j’aimes
I just updated the Factory File for the Sewer Lid, so you can use it if you prefer
- 1 j’aime
Hi there - how many grams of filament is used for the Dragon yarn bowl at the recommended setting. I would like to purchase but it depends on the amount of filament it uses.
- 0 j’aimes
Hi. About 200-250 grams
- 0 j’aimes
I just purchased and ed the Flexi alien file 4-6-2025. It did NOT come with file for separate eyes. Please update, so I can acquire the eyes and complete this project. Thank you very much!
- 0 j’aimes
Hi, sorry about that. I just updated the files, please again, thanks so much for your !
- 0 j’aimes
I printed nuke case twice. Every time I closed it in breaks at the hinges. Could you please advise how to print it to avoid that? Thanks
- 0 j’aimes
Hi, it could be due to using silk filament? If so please use Pla+ or Pla for the briefcase. If not, your printer could be extruding too much plastic, this happened to someone, reduce the extrusion and it will print nicely :)
- 0 j’aimes
I am still interested in the cooler design, it's still available?
- 0 j’aimes
Hi, yes sure here: https://cults3d.emulatorsite.com/en/3d-model/home/bundle-v4-v6-v8-can-coolers That's the full pack but I also sell other packs with less designs
- 0 j’aimes
I am still interested in the cooler design, it's still available?
- 0 j’aimes
Sure
- 0 j’aimes
hi. I bought the cooler files but the piston koozie for regular cans is missing. I only got the mini cans piston koozie. i didnt print it yet but am pretty excited about it. i just started organizing the files im actually using today and noticed that file was missing.
- 0 j’aimes
Hi, I think we talked about this someone else. The koozie for regular cans is not included because it won't fit the regular cans motor, so it's only available for small cans. I also sell a piston koozie that can be personalized: https://cults3d.emulatorsite.com/en/search?q=piston+can+koozie
- 0 j’aimes
Hello. How much does the yarn bowl weigh?"The Dragon"
- 0 j’aimes
About 300grams
- 0 j’aimes
Thanks
- 0 j’aimes
Hey, how can I get in touch with you? Could you just make me the alien head on a plate?
- 0 j’aimes
Check my profile, all my socials are there
- 0 j’aimes
Where is the Bigfoot making a heart with his hands? I found the other 2...
- 0 j’aimes
Hi, it's now available: https://cults3d.emulatorsite.com/en/3d-model/art/bigfoot-heart-hands-3mf-included Sorry forgot to it before, thanks for your !
- 1 j’aime
Thanks! Just bough it. Any chance of doing a see-no-evil, hear-no-evil, speak-no-evil trio version?
- 0 j’aimes
Wie groß muss druckvolumen dafür sein
- 0 j’aimes
For what?
- 0 j’aimes
Hey! I have a question regarding the tentacle bottle holder you’ve got. Would it fit a kraken rum bottle? Can’t really tell with the wine bottle in the picture and no idea what size bottle fits. Any help in this will be great!
- 0 j’aimes
Hi, it should fit most wine bottles. What diameter is the kraken rum bottle?
- 0 j’aimes
It’s approx 90mm or 3.5” wide
- 0 j’aimes
It fits regular wine bottles about 75-80mm diameter so 90mm is too big, you could scale it up
- 0 j’aimes
I've been thinking of subscribing to your Patreon, since there are prints I'd like to try selling at the Farmer's Market with my own designs. The reason I hesitate, is if I find out that I thought they were cool and they don't, and cancel my subscription after a couple of months am I stuck with what I've printed? Or do I have the right to leave them on display until I've gotten rid of them?
I await your reply before I subscribe.
- 0 j’aimes
Hi, thanks for considering subscribing. I know many if my patrons sell my prints and they do really well, it all depends what things you print and try to sell.
Many came back to me saying my patreon is their best seller, you could our FB group and ask them yourself:
https://www.facebook.com/groups/ik3dcommunity
About sales, you are allowed to sell since you until the last day of your subscription.
I hope that answers
- 1 j’aime
It mostly answers my question. You've got some really nice creations, that I find cool, but I've had issues before with things that I thought would sell and didn't. I live in a rural area, and the types of things that sell depend on the venue and what I can afford to book table space at. The only thing I really need to confirm is that if I'm finding that something I printed isn't selling well, am I stuck with them if I cancel my Patreon? Or can I sell my remaining prints that I've already printed for whatever price I can get rid of them for?
- 0 j’aimes
Well as long as you make $10 in 30 days you pay for the subscription, that's like 1-2 sales a month :) if you have any left overs you would still have to be subscribed until you sell all of it, but I know most models sell well
- 0 j’aimes
Thank you