Have you started work on the Zap Bit?
- 1 j’aime
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇺🇸 Pays du membre : États-Unis
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Écrivez votre message :
54 commentaires
Yes I've already completed it and Gear Rush, I'll get them ed later this evening
- 0 j’aimes
Hello! I couldn't find any other way of reaching out to you, but I am very interested in ing you on Patreon and receiving access to your full catalog of classic Beyblade files. The only thing I am wondering is how close they are to the originals, and if the original sticker sheets work/align correctly with your models. I see you have some sticker sheets already that come with Patreon access, but it doesn't seem like there is one for every model, unless I just can't see them.
Thank you so much in advanced, and amazing work! I printed some of your free models and they are flawless.
- 1 j’aime
Hello! Thanks for the ! It really means a lot!
I'm glad to hear the free models printed well for you too. To answer your questions, my models are very close to the originals. I try to match them as accurately as possible while only slightly modifying a few areas for better print quality. As for stickers, the original sticker sheets usually fit pretty well, but sometimes a small trim might be needed since 3D printing can cause tiny differences. I don't have sticker sheets included for every model yet but I’m still working through them and adding more over time. In the meantime, if you have multicolor printing it can be used as a nice replacement for stickers until they are finished.
- 0 j’aimes
Take this down. You are violating copyright. I see that you have your own licenses so I expect that you respect mine. If you do not take it down soon I will be issuing reports.
https://makerworld.com/en/models/210671-beyblade-x-launcher-grip
- 1 j’aime
False Copyright Claim – Cease and Desist Notice
CT-Sazabi,
Your claim regarding my Beyblade X Launcher Grip Attachments is completely baseless. I designed and created this model myself and there is zero infringement on your rights. If you believe otherwise, you are required to provide legitimate proof, not vague accusations.
Furthermore, making false copyright claims and publicly accusing me without evidence constitutes defamation. If you continue spreading misinformation or attempt to interfere with my work, a formal cease and desist notice will be issued against you for defamation and fraudulent copyright claims.
If you have a legitimate concern, you are welcome to present actual evidence through the appropriate legal channels. Otherwise, I suggest you refrain from making baseless threats.
This is your only warning.
- 2 j’aimes
Do you have the Kick bit in the works?
- 0 j’aimes
Not currently, do you have a picture of it?
- 0 j’aimes
Only what has been from the New York Toy Fair
- 0 j’aimes
I have a clear pic of Kick now
- 0 j’aimes
I have it completed now and should have it posted soon
- 0 j’aimes
Is it out now?
- 1 j’aime
Yeah
- 0 j’aimes
Hi, i'm new here and I wanted to know if you can make a left and right light launcher right spinning holdparts. If you don't know what i'm talnking about please tell me. Thank you
- 0 j’aimes
Can you link a picture to me?
- 0 j’aimes
Here's a link to a video https://youtu.be/Rsezxno8I?si=j6x8OoIy9ZsfIiVZ
- 1 j’aime
Hey Ghost, it's Cardizem. You better check this asshole's files out. He's selling files with my scans, and your EG bases.
https://cults3d.emulatorsite.com/en/3d-model/game/beyblade-death-gargoyle
- 0 j’aimes
Thanks for the heads up. I just checked his profile out and he's definitely stealing our files and selling them in bundles. Pretty messed up.
- 0 j’aimes
hi i was wondering what fillament to use for the launcher grip accessories
- 0 j’aimes
PLA+
- 0 j’aimes
Is there a possibility that you can send me the syl file for this print specifically, I would like to buy it but unfortunately I don't have e currency only usd currency It would really be a great help and I must say everything that you've modeled is absolutely incredible. I appreciate the time that went into creating them.
- 0 j’aimes
Thank you!
- 0 j’aimes
Is there a possibility that you can send me this file I would like to buy it but I don't have e Currency only usd if so I would greatly appreciate it and I just have to say you truly make amazing work
- 0 j’aimes
Thank you!
- 0 j’aimes
Excellent print using PLA single and heat color change filament! Perfect fir with string launcher. Definitely recommend! Thank you!
- 1 j’aime
Glad to hear it! Thanks so much for your !!
- 0 j’aimes
Hello, do you have print files for left spin plastic gen to BEYBLADE X launcher prongs? I’ve got two broken launchers I’d like to repurpose for my plastic gen beys
- 0 j’aimes
The prongs work for both left spin and right spin plastic gen beyblades :)
- 0 j’aimes
Hello ser
I was wondering if there are plans to
Make more models with fused spingear and base so 2 components 1attackring and 1 base/spingear in 1
- 0 j’aimes
I had released versions like this at one point but I stopped doing them. But I will look into releasing both versions down the line
- 0 j’aimes
Hello ser
I was wondering if there are plans to
Make more models with fused spingear and base so 2 components 1attackring and 1 base/spingear in 1
- 0 j’aimes
I had released versions like this at one point but I stopped doing them. But I will look into releasing both versions down the line
- 0 j’aimes
I like your Slifer Blade. Will you be doing the other 2 Gods as well or just Slifer
- 0 j’aimes
Yes the other 2 Egyptian Gods are on the to-do list as well :)
- 0 j’aimes
Hiya, I was wondering if it would be possible to have access to the pommel for your: BEYBLADE X | CUSTOMIZABLE SWORD LAUNCHER GRIP | CUSTOM SERIES model? I tried to convert the STL to add a slight chamfer to it since I've found it to be a bit on the sharp side. So a remix of it or the orignal 3D model file would be great thanks!
- 0 j’aimes
I don't currently have my editing files available for access but I will look into this!
- 0 j’aimes
Hi, amazing work. I was wondering which software you use to edit the designs?
I was hoping to adjust the spin gear so it can fit 2 weight disks
- 1 j’aime
I mostly use Tinkercad for modeling as its free and beginner friendly. But I've added the (x2 WD), (x3 WD) & (x4 WD) Fused Spin Gears to this listing: https://cults3d.emulatorsite.com/en/3d-model/game/beyblade-fused-spin-gears-bakuten-compatible-spin-gear-series
- 0 j’aimes
What Screw do you use for the Beyblade grips and connectors?
- 0 j’aimes
Phillips Rounded Head Thread-Forming Screws
for Plastic, Zinc-Plated Steel, M2.5 Size, 10 mm Long - https://www.mcmaster.com/90380A341/
- 0 j’aimes
Love your work! I had a few ideas id love to see you model when you had a chance!
1st concept is a blade base for plastic gen that allows for ratchets to be connected. Like it would have the ratchet locks.
2nd is a "slip grip" that attaches to string launchers that is in the shape and styled the same as the dragon rip cord that comes with Bakuten shoot Dragoon Beyblades, and like L Drago and stuff.
- 1 j’aime
I love the ideas! Thank you for sharing! I will add these to my design list and try to work on them soon :)
- 0 j’aimes
The first concept you requested is now complete!
- 0 j’aimes
This is AWESOME!!! Thank you!!!
- 0 j’aimes
Hey there! I was just wondering, I just 3D Printed your Ptera Dino Thunder Beyblade, but it's not fitting on my launchers.
Which launcher is it meant for?
- 0 j’aimes
Oh hey! I did end up having the Dino Thunder Beyblades work on the plastic series launcher after all! My apologies!
- 1 j’aime
Thats great!! Thanks for your !
- 1 j’aime
Hey I was wondering if you have the model for the "Beyblade Heavy Left Spin Gear (Fused) | EG System", I found it on your shapeways profile but couldn't find it anywhere else. Do you sell the model or have it available for ? I'm trying to repair my brother's old Dragoon G & that model is just what we would need to replace his broken EG
- 0 j’aimes
Nevermind I just saw you replied to me on Etsy, Thank you so much for making these models <3
- 1 j’aime
Awesome! Thank you for your !
- 0 j’aimes
hi i just got the beyblade x double launcher and went to print it and its way smaller than the photos. can you help me figure out how kmuch more to size it to fit correctly please
- 0 j’aimes
I just updated the listing to include the Sword Launcher Grip so you should receive an email update with the files.
- 0 j’aimes
Thank you
- 1 j’aime
hi i just got the beyblade x double launcher and went to print it and its way smaller than the photos. can you help me figure out how kmuch more to size it to fit correctly please
- 0 j’aimes
Replied in thread above :)
- 0 j’aimes
Ghost, what's the best way to print your Semi- Flat and Sharp for minimal fine tuning after the print is done?
- 0 j’aimes
https://www.youtube.com/watch?v=ApNxS1f8Myk&t=34s
If you're using Cura, try using the settings I've posted in the video above and you should be able to take all the s out in one pull. You also need to either using a Printing Block beside the blade base or print x2 blade bases at one time to minimize the time your 3D printer nozzle spends around the base tip. (Printing x1 at a time can cause the nozzle to deform the tip)
- 0 j’aimes
Hello
I purchased and ed your Beyblade Nightmare Dranzer. Unfortunately I ran into an issue. The model could be printed and put together, but the default scaling was a little too short to be used on a regular Beyblade starter.
I used Bambu Studio as slicer software and printed all the parts at 100% size.
Do you have any idea as to how I should adjust the scaling factor to make the model the right size to be used on a starter?
Kind Regards
Oliver
- 0 j’aimes
Hello! Thanks for reaching out! I have tested the files with all bakuten parts and haven't ran into any issues with compatibility and am unsure what the starter you are referring to is. Can you message me on discord with pictures of your issue?
name: ghostmasterpresents
- 0 j’aimes
Hello, would it be possible for you to create the plastic parts of the Dranzer S X for repair and customization? Just like you did with the Silver Wolf.