I printed your file and it doesn't attach well to the bumper, how can you help me? https://ibb.co/7XnW8yQ
- 0 j’aimes
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇦🇺 Pays du membre : Australie
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Écrivez votre message :
10 commentaires
If it's flush with the bumper front surface; could you measure the extra distance needed for the inner foot to touch the base? I'll extend it and that version for you. I don't think I had a problem, I have printed them for someone else I'll ask if they took any pictures of behind.
- 0 j’aimes
I don't know if you can understand, but you need to increase the two fittings on the red mark by 5 millimeters https://ibb.co/sPdSZsY
- 0 j’aimes
As in width or length?
- 0 j’aimes
- 0 j’aimes
I ed a zip folder of all the models 5mm thicker. Let me know how that goes. Also confirm you have access.
- 0 j’aimes
Hola, se me levanta la pieza que te compre todo el rato con wrapìng las tapas ciegas del paragolpes de e36 ¿lo has probado?
- 0 j’aimes
Hola, hablo inglés, así que déjame un poco de tranquilidad con esta respuesta. Probé la impresión y recuerdo que no estaba completamente al ras del parachoques, pero estaba bastante cerca. Aún no he probado el blanco, así que tal vez se note más. Lo intentaré y te responderé.
- 1 j’aime
Hello, are you able to make a custom mount for a Garmin catalyst for the e36? I have pictures of my current one and maybe you’d be able to improve on it. Please email me at [email protected]. Thank you!
- 0 j’aimes
I sent you an email.
- 0 j’aimes
E36 BOTTOM COMPARTMENT GAUGES. Hi will this part fit RHD car?
- 0 j’aimes
Yeah all my designs are specifically for RHD. Just note you could mirror it if needed in 3D builder.
- 0 j’aimes
You have remarkable 3D-printed car parts.
We're actively seeking designers to partner with us in expanding our catalog of spare parts (4000+). We want to buy or lease some of your models.
How can I you in of partnership?
- 0 j’aimes
Send me your site
- 0 j’aimes
octoclassic.com
- 0 j’aimes
I sent a message on your site. Communicate via email.
- 0 j’aimes
Do you have this poduct for left-hand drive vehicle??
- 0 j’aimes
Mirror it
- 0 j’aimes
I bought your e36 turbo boost gauge and I can’t unzip the file ?
- 0 j’aimes
Which one was it?
- 0 j’aimes
I checked that model, it’s not zipped, just 3 STL files. I’m not sure the problem, I’ll them when I get home from work and check.
- 0 j’aimes
Yeah, they're just files not a zip. I reed my files and checked which was fine. Let me know on your end what the problem is.
- 0 j’aimes
Bien el diametro de la rosca es de casi 11 mm y la longitud es de 32 mm
- 0 j’aimes
Aguardo informacion ya que no me sirve asi el el shift knob
- 0 j’aimes
podría tu dar tu email. cual arhivos tu quero, archivo de ensamblado o desmontado.
- 0 j’aimes
Mi email es [email protected]
Intente imprimir ensamblado y se despego cuando estaba arriba la impresion, podria probar de hacerlo desamblado y luego pegarlo no? Muchisimas gracias
- 0 j’aimes
Me gustaria ar para poder modificar la palanca de cambios al diametro de la mia
- 0 j’aimes
Que carro?
- 0 j’aimes
Es un Toyota Celica modelo 81
- 0 j’aimes
Yo no tengo ese carro. Yo necessito dimension de eje (diámetro y longitud de agujero).
- 0 j’aimes
Hi, I would like to you, do you have instagram or somewhere to talk to you about some 3d models?
Send a message via email, at [email protected]