Creating 3d printable transformers and hobby designs!
↘️ Models available via http://patreon.com/FunbieStudios
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇸🇬 Pays du membre : Singapour
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Hello FunbieStudios, I would like to ask you a question about the extender part for the Legacy Titan class Metroplex: is this piece durable in the time?
Thank you for all the files that you make, have a nice day!
Oh, what do you mean by "durable in the time" ? :)
I mean that the ratchets don't break by just using them
Ah, if printed at a stronger setting, they should hold up pretty well - aside from some slight wear as you use them (similar to any other plastic part)
Okay thank you, I think I will buy it once the moment comes to me, have a good Day 😁
Hello FunbieStudios, I would like to ask you a question about the extender part for the Legacy Titan class metroplex: is this piece durable in the time?
Hello Funbie, my name is Danny and I hope my message finds you well. I was looking through your files and I've seen you do some stuff for the Haslab Victory Saber. Would it be possible to make some replacement head teeth for Victory Leo? Thank you for your time.
Thanks for the suggestion - will give that a think :)
I was inquiring about the Teletraan 1 model...do you know the setting to match CHUG scale transformers?
Teletraan-1 was largely designed to CHUG deluxe scale, but since personal preferences on that may vary, scaling is always an option :)
Hello, can t his be scaled up to match CHUG Transformers? Thank you!
Oh, not sure which item you are referring to here. But generally yes, sets can be rescaled in your slicer before 3d printing.
I'm at a loss here, due to some issues in payment I ended up buying the Sari file twice, did you receive the second payment? Can you refund me if you did? Not entirely sure how to reach out to Cults to fix it. Thanks!
It only shows up once on our side, so it might be an issue you will need to reach out to Cults on. Their form is here - https://cults3d.emulatorsite.com/en/
https://cults3d.emulatorsite.com/:169859
Whoud this work on a voyager figure?
It would peg in if there is a standard 5mm port on the figure.
Hello FunbieStudios,
I hope you’re doing well! My name is Elijah, and I’m the owner of Drift’s Tech, a North American third-party provider recognized for Transformers figures and upgrades. I’ve long ired the creativity and detail in your designs, and I’d love to explore the possibility of a licensing partnership with you—similar to the collaboration I recently established with Vortigan3D.
Here’s what I have in mind:
3D-Printed Figures & Upgrades
I would like to produce and sell your Transformers designs as high-quality, 3D-printed collectibles. This would involve a licensing agreement that compensates you for your work.
Monthly Licensing/Patreon Model
I’m open to structuring this collaboration through a monthly fee—potentially via Patreon—or any similar arrangement that ensures fair compensation. Additionally, I’d be happy to purchase STL files for each model I intend to produce.
Promotion & Credit
My commitment is to give you prominent credit as the designer on all product listings, social media, and any marketing materials. I will actively drive traffic to your platforms, which can help boost your visibility and further sales of your digital files.
Why This Could Benefit You:
Steady Revenue: A monthly arrangement provides consistent income for your creative efforts.
Expanded Reach: My existing audience of Transformers enthusiasts can discover and appreciate your designs, potentially increasing your overall brand recognition and file sales.
Long-Term Partnership: I’m looking to form an ongoing collaboration with multiple releases and possibly special edition pieces that highlight the best of your work.
If this proposal aligns with your vision, I’d love to discuss the details—such as licensing , pricing, production schedules, and marketing strategies. Thank you for your time, and I look forward to the possibility of working together to bring more amazing Transformers figures to fans everywhere!
Warm regards,
Elijah
Drift’s Tech
Hi Elijah, thanks for reaching out and the kind words! Indeed what you're looking for can be found under the Merchant tier of our Patreon. Once subscribed under that, you should be good to go in the manner you described!
Do check that out at www.patreon.com/FunbieStudios :)
hey im just wondering is there any plans to make overwatch ramattra megatron weapon at all?
Haven't had plans yet, but will give that a think!
keen to get it if it dose get made
Hey! I know it's a little far off, but are you planning to adapt your Radiator Grill design for Slingshot to the new Legacy version? Thanks!
That might be a good idea, will know when we get the figure in hand :)
hey could you do mini jets with 5mm ports to add on tidal wave?
Interesting idea - will give that a think!
Hi I was wondering if you were gonna make a bigger d-16 arm cannon for tfone ss megatron cause I think I'm the one guy who prefers it to the triple barrel.
hi i was wondering if you are gonna make a bigger more proportional d-16 arm cannon for ss megatron i prefer it to the triple barrel. thanks
Hi, I've bought Skybound Megatron arm, but thumb seems too small for the design. Could you make a more proportional version?
Oh, that might be down to printer calibration, so perhaps you can try scaling it slightly in your slicer before printing
No, it's the desing of stl itself. Mb it's due to cannon cutout, but on an open hand thumb seems way thinner than other fingers, and when fist is closed it's looking like thumb missing a knuckle. Otherwise absolutely no issues with the purchase, just thought that's something that could be fixed/remixed easier from your end.
hey im not sure if this is the best way to you, but are you going to make buildings to go with the modular system for large scale dioramas? im trying to make a city like place for my figures and art
Thanks for reaching out, but that's probably not something we would work on.
I really want someone to produce and paint the Transformers Quinesson Pit of Judgement full set for me. Do you have any recommendations on how I can get this made for me?
You can reach out to our merchant partner who might be able to help --> www.facebook.com/collectorcrafts/ -or- [email protected]
Can you make a better apelinq ape head were his face fangs stand out more and more detailed?? For the ss figure
Now’s your chance!
Hey there, for the clippjumpers flipping hand, what is the best material you recommend for printing it out?
For the small piece, it'll probably turn out best being resin printed, though a well calibrated fdm printer should pull it off quite decently too.
Hi, By any chance do you do an STL file for a Hubcap head for Titans Return Bumblebee?
Hello is it possible to create the masterpiece base? I have some with extra armatures and want to display my figures with the bases connected with room for the additional armatures
Ah, that's an interesting idea - will see if we can give it a shot sometime!
Yeah basically a one to one copy of the masterpiece base. If you get around to it and have the file up for sale please let me know as I would like to purchase it
I don't have a 3-D printer, would I be able to pay extra to get a design made?
We don't print our models out physically. But you can reach out to our merchant partner who does --> www.facebook.com/collectorcrafts/ -or- [email protected] :)
Hello! i need help please, the Signal Lancer's model dosen't have an assembly diagram, at least the one i ed and i can't find it anywhere, please i need help with that!
The assembly diagram can be found on this page, together with the images - https://funbiestudios.com/transformers-3d-print-files-2/signal-lancer-from-transformers-cybertron
Check this out
Link: https://m.youtube.com/watch?v=yZLLf9Z3u7Q
Maybe you can give them dinosaur pretender shells for steeds!
Intriguing idea! We'll need to get these first though
Okeedoky
Hey FunbieStudios, first & foremost, I just wanna say.. I LOVE all the stuff you've provided, it's fantastic~ So thank you, very much!
That being said, I had a bit of a question, or a request more like..? A while back when I got my PotP Optimus Prime, the handle section for the included Matrix came broken. Really brittle plastic from the looks of it, but I dunno all the details lol. Would you be able to make a printable replacement for that piece? And if so, do you think it'd be possible to modify it so the figure can actually "hold" the matrix? That's literally my only real pet peeve with the PotP line lol. They come with a Matrix or Matrix-Like artifact, and yet, they can't actually hold it or pose with it? ..Feels like an oversight to me.