33 commentaires

send it to my email: [email protected] or come find me on the discord. all is in my "about" on my profile.

box select one in edit mode in wire mode, press p and separate by selection, export as stl

Thank you I'll give it a try..

feel free to send me an email. i don't have much time anymore, but i'll be happy to take a look.

Can you send me your email again I forgot it or email me if you still have my email

i don't do much rigging anymore, usually just model in place. that was a while ago so i will have to check my library.

not sure if i replied to this already. it was so long ago when i made those models i don't know what i did but i messed something up, so i just ed a lower-poly version of her. sorry.

Thank you for your message! If I get some time, I will give it a shot. I do have a base started for it already actually.

ok

ok

I absolutely do. Feel free to shoot me an email. Give me some detail as to what you're looking for.

Single print for now.

Thank you for your patronage! I'm not very familiar with lychee myself. I would recommend using a Cura slicer if you are printing fdm, or something like the photon workshop slicer for resin printing. You could also try importing the model into a free modeling software (I recommend 3d builder) and repair it in that program first, then re-save the stl and try it in the slicer again. I'll also say that a lot of times slicers will say something isn't manifold or that it has structural errors but will still print properly. If the slicer display has a function where it shades parts of the model that are in error and it isn't displaying any shaded areas, I would say you're good to print regardless. Let me know if any of this works and if not I'll see if I can assist further.

Got a friend of mine to use 3D Builder to fix it for me and it worked! Wanted to do it myself but I'm still looking for a Mac alternative. Would you happen to have a pre-ed version for the Saturnine? I'm going to have the same friend print it for me and it would really help : )

photon workshop is free and the function in the slicer is really good. However, I will see about putting some pre-ed files on here within the next few days. Thank you so much for your , I hope you enjoy your models!

I can certainly give it a try if I've got time. If you can email me some photos at the email in my bio on here I'll see what I can get started in a reasonable amount of time. Thanks for your interest!

I'll send links to the halopedia articles and pictures as well!
Thank you SO MUCH

What printer are you using and what scale are you printing it in?

Thank you for your message! I did rip some of the armor pieces but then modeled a body and rigged, this is how I was able to further edit him into my female didact model which is almost entirely my own.

I see.

What about the warrior servents?

I made them myself. And I have printed all of the models you are referring to, so I'm not sure why having "rip" pieces would influence your decision to print. I have made sure any ripped pieces are manifold so you shouldn't have any issues.

I have printed some already lol. I was just curious.

I was curious too, I didn't know if there were general issues about printing ripped models I didn't know about

Sometimes there are ethical reasons and some people just do not like them. I would suggest adding it to the descriptions just to be transparent as there are far too many rips out there that do not say they are rips.

Thank you. a little of both. some of the armor pieces and helmets are rips. made bodies and weapons and posed.

I see.

Thank you so much! I'm glad you enjoy my models. unfortunately, I don't quite have a large enough following to justify selling on MMF because I have to pay monthly to sell with them. However, as I grow I hope to be able to afford it. In the meantime, is there anyway I can make my models more available to you in another way? do you have issues getting models here on Cults? Please let me know and I will gladly help however I can. Again, I appreciate your patronage.

Will I just became a patreon

Donnie, I appreciate you reaching out to me. I am unfortunately falling behind on many of the models I have been asked to create, and am therefore not going to be doing commissions for the foreseeable future. I will attempt to complete the models that you have asked me to do within the next few months. Thank you for your patience.

Cool you're the best

I will absolutely do that, thank you for your purchase! In the mean time, I would recommend 3D builder if you don't already have it. You may be able to split them up more easily using that program.

Thank you. I will await their . When you put them up do I just re?

Yes, it will let you re- for free

Okay. Also I do not know if you know this but the weapons have alot less detail than the figures.

If you have the means to print it that large that would be amazing. please share pictures of the print here under "makes"

Ight, bet

I have, but I find it likely that people would simply the sword instead of buying the pack. That being said, I figured some people might just want the sword and that's why I made at least one pose where the sword could easily be removed and added to another model if someone wished.