3d parts, designs and scans! If there is a part that you would like designed or scanned just let me know and I will try to get it!
Free my models 05ca3d43
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇺🇸 Pays du membre : États-Unis
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Any chance a drivers side vent gauge pod is in the works for the wrx sti? I have the defrost pod setup and it’s fantastic, but now need somewhere to stuff the Wideband gauge. Seems the lower vent model does not exist for 2015+. Thanks!
I no longer have access to that chassis, so it will not happen anytime soon.
Does the auxbeam mount fit the Gen 2 titan?
Unfortunately, I do not have access to a Titan, I have no idea if it fits.
Any discount code for a first time and future long time buyer? 😀
I do not have discounts set up currently, I will look into it.
Hi, I'm looking for a CZ P-07 pistol stand, will you be able to assist? I've been having a hard time finding a stand that works for it.
Hey, I can try, I do not have a P-07 pistol or magazine to use as reference though.
Hey, I did come right I used the P-10C since they both use the same magazine size. But thank you for offering to help, I really appreciate it!
Hello, I recently purchased your file for the Subaru Forester gauge pod. I would like to ask if it is possible to enlarge only the inner diameter of the gauge hole (to fit a larger gauge), but without changing the size and shape of the base that fits into the ventilation slot.
Possibly! What size are you looking for?
62mm
Hey quick question regarding the g35 defroster vent gauge pod. My question is was it easy taking out the oem vent?
Yes, they just pull out. I forget which edge to pull from though. I use a pair of needle nose pliers with electrical tape on the jaws.
Hi, Doing a reprint of the Gauge pod for BRZ / FRS /GT86 2012 -21
Is there any chance you have the V3 model for RHD in double? I only have the single in the and unfortunately the 52mm double doesnt fit the guages.
thanks so much
Hi.is there a model for three devices in the mitsubishi lancer x
Hello, I do not have any models for the Lancer/ Evolution currently.
Hi.is there a model for three devices in the mitsubishi lancer x
Do you make a auxbeam mount for the rb80 xl? Its a lil bit bigger than standard 8 gang auxbeam.
I do not, I have not had one in hand to model.
Do you make a auxbeam mount for the rb80 xl? Its a lil bit bigger than standard 8 gang auxbeam.
can you send me the str file foe what I just bought?
The .stl file? It is available to after your purchased it.
Hey there, where did you get the stl for the receiver. I wanna design a pdw for my xdm 10 mil i cant find one on the sea or on thingiverse?
Thank you for the quick reply. I am asking about this one.
https://cults3d.emulatorsite.com/en/3d-model/tool/milwaukee-m18-fuel-3-8-impact-driver-3d-scan
Sorry, I got busy, this reply was slower! It is part #2854
What is the model number for the 3/8 stubby Milwaukee scan?
https://cults3d.emulatorsite.com/en/3d-model/tool/milwaukee-m12-3-8-in-ratchet-3d-scan This one? I have it listed in the description, but it is PN# 2457
Hey, so I printed this based around my 52mm ethanol gauge. I decided that should go somewhere less intrusive. I then decided to put my oil pressure there but can’t find my old gauge. Ordered a different one and didn’t read correctly. It measure 67.5mm diameter. 25mm deep from face to back. Any way to slightly increase the inner diameter of this one https://cults3d.emulatorsite.com/:495147
left hand drive version. I can take a stab at it but design I haven’t quite figure out yet haha. Thanks!
Hello, I will see if I can make that happen, It will be a while before I can get to it though.
Hi Mate :D would it be possible to make a triple pod version that would 62mm gauges? I tried editing these myself but im in well over my head. https://cults3d.emulatorsite.com/en/3d-model/various/brz-frs-defroster-vent-52mm-gauge-pod
Specifically for a RHD gts86
Hello, The fitment is very awkward and wouldn't fit a triple pod very easily. I can give it a try, but have low hopes for good fitment.
would this format work better than a linear one for fitment? Or is the issue more in the 62mm size. see reference image attached https://imgur.com/a/BdMVb1x
Possibly, I will see what I can do!
Hey! Do you have any news? I would also need triple pod like was shown
I would need it for 2002-2007 wrx sti
No update yet, I am swamped with work right now.
Got it, any idea when you think you might have time to work with this?
I really don't, sorry. New work keeps getting loaded up and this is a bit down the list.
Gotcha. I will follow up with you later
Hi, my friend! I purchased your model from this link and would like to know if you have the .STEP geometry without the mesh. https://cults3d.emulatorsite.com/en/3d-model/various/bmw-m5-m6-oem-front-brembo-brake-caliper?srsltid=AfmBOoq63LUDg-rC7PRTix_29BkMtaYsnE98N3SiO3iAE0Ef21w4yGZN
Hello, I only have the 3d scan mesh unfortunately.
Hello friend, how are you?
is it possible to make it double pods or triple pods?https://cults3d.emulatorsite.com/es/modelo-3d/variado/forester-sg-52mm-gauge-pod
Hello, I can try to, but It will be a while before I can create and add it.
Could you please let me know the size of your model? https://cults3d.emulatorsite.com/en/3d-model/various/nissan-logo-insert-for-frontier-aftermarket-grille
It is already scaled correctly for the aftermarket grille. Just make sure to import it in MM.
You didn't understand my question for some reason. I am interested in the original dimensions of the logo.
Would you be interested in deg a couple of additional 3d files for a Gen ii Frontier?
Hello, possibly! What do you have in mind?
2 items:
1. I have an inclinometer I got from Amazon that I wanted to mount on the top center of the frontier (2021 Gen ii SV 4x4) dashboard above the radio. I have a bullet proof mounting tray in there so there should be plenty of attachment options. Just want a shell over the top of the inclinometer that holds it in place and looks more integrated. Here is the link: https://www.amazon.com/dp/B09W324VZJ?ref=ppx_yo2ov_dt_b_fed_asin_title
If interested I have a calibration measurement tool and can get you specific dimensions of either of these products. Let me know if you want to talk more in depth about either of these.
Get a chance to review the above details?
Hey, I will take a look and see what I can come up with! It will be a bit in the background for a little while though, I am pretty behind on projects.
Hi EMAP, had a chance to look at this yet?
Hey, I have not. I have had little to no free time to put into new designs lately, I'm sorry!
hola buenas de casualidad podras hacer el Vaina de indicadores para 02- 08 Subaru Forester pero doble para dos relojes ?
Hi i bought de VAINA DE INDICADORES PARA 10TH GEN CIVIC 15 -21' and it is perfect but in school they are asking if I have the file of the model in solid works or something I wanted to know if there is a possibility of getting that file if not no problema hopefully I can get more news
Hello, I do not have Solidworks currently so I am unable to export it as a "sldprt" but I did include a ".step" file which is the next best thing!
Hi there,
I bought the stl file for the Punisher/double stack pistol stand and it is great. I wanted on for my AA Kimber 1911 replica so I ed the single stack pistol stand file. Unfortunately this is too wide for a 1911 single stack magazine pistol and the mag insert appears to have the same dimensions as the double stack. Can you help?
Regards C
Hello, I just double checked the file, The single stack is a smaller "magazine" upright than the full double stack version. Maybe you printed the bare double stack version without a logo that was included with the Punisher stand?
Thx
Hi. Firstly thank you for taking the time to check the print. I really appreciate the . I checked everything my end and the fault is completely mine. As you suggested I had spliced the plain file from the double stack option and renamed it wrongly. Now printed the right one and it fits and holds beautifully and sits flat perfectly with no lift. Thanks again and sorry for the inconvenience.
Hey man
Really a nice job what you are doing. I want to buy some parts for Nissan from you, but I´m nur sure if it fit in my car.
I have an Nissan Navara D40 from year 2013.
What do you think?
Do you also have an tablet mount for this car? This will be perfect :-)
Hello! Honestly, I have no idea. My parts were created for D40 Frontier and I am not sure what is different. I would say if it matches in the pictures, it should work, but if they are different in the pics they wont likely fit.