Aller au contenu
Desytro
@Desytro
Compte certifié
Que signifie le symbole « Compte certifié » ?
Compte certifié
Partager ce compte

Hobby creator.

I listen to comments left on this site, if there's a complaint with a file I'll fix it.
Also I Update stuff from time to time, give them new molds or make variations so you might want to check my site from time to time.

And to add these discount codes.
Just type in the following:
FCKTRUMP
F-ELON
K1LLN4ZIS

I don't know if they add up, you should try them all! ❤️

Populaire Vendeureuse Influenceur·euse Téléchargement Designer Anniversaire

👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇩🇪 Pays du membre : Allemagne
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible

Écrivez votre message :

37 commentaires

Desastermon
Desastermon

Hey there I have just fished removing the cast of the Kobold masturbator.

I am just running into one issue now. The interior (the connected one) won't move in any direction, so I can't remove it. Is there a trick how to remove it?

Desytro
Desytro

I found it helped to use soap and water, I try to run your finger between the mold part and the Silicone to loosen the connection between both.
Then the soap should also make it easy to just pull the parts out.
lacojo
lacojo

I would like to commission you that for that what would be the rough price of it

Desytro
Desytro

I've been thinking about how to make it work as a silicone toy but can't find a reasonable way to do it. I'm sorry but I think I'll stick for more usual designs for now.

lacojo
lacojo

Ok
themaxbackup
themaxbackup

I bought this design from you.
I didn't notice that it didn't include a mold in the description.
https://cults3d.emulatorsite.com/en/3d-model/naughties/dragon-muzzle-masturbator-fyren
Can you please send me a mold?
I can't print it directly.
Or could you replace it with this design that s the mold, please :(
https://cults3d.emulatorsite.com/en/3d-model/naughties/fantasy-muzzle-masturbator-fianna-with-mold

I'm a customer of yours and have purchased several designs from you :(

Desytro
Desytro

After some emails we decided to go for a refund.
Of anyone else does a wrong purchas or wants help/refund I will ofc sort this out with you and you can respond here in these Messages. To whoever might read this.
lacojo
lacojo

Hi there i was just wondering if you could do combine the head Mipha BotW to Fantasy Masturbator at you made to something like this
AfterDark247
AfterDark247

Hello, I was wondering if were allowed to print the molds, use the molds and pour silicone into it to make the toy, and sell the toy? If that makes sense ^^''

Desytro
Desytro

It is allowed :)
I set the license to commercial use it just sometimes resets back for no reason.
TheLongestJohn
TheLongestJohn

Would you be willing to take on a few custom jobs? I'd like to hire you to help design a few items for me.
Please let me know the best way to you if you are interested. Thank you.
Perfect_Memento
Perfect_Memento

Howdy! Was browsing the internet and came across the kobold masturbator design you posted on Reddit quite sometime ago!
It honestly piqued my curiosity and found myself here before long!

I was wondering if you had advice for- how I'd essentially acquire a set up to make one myself!
I imagine I just need some kind of 3D printer and a lil bit of knowledge for working with silicone and such?

Help would be greatly appreciated! ^^

Desytro
Desytro

Oh well it's quite an investment I'll tell you that.

You have 3 choices for 3d Printing.
Get a FDM printer that uses Plastic filament
Bambu Lab A1 for 340€ is a good choice.
Or
A SLA printer, elegoo Saturn 4 is a good example, 400€ uses liquid resin that has a big problem. It inhibits the curing of silicone(very annoying) so you need to have a lacquer coating but the details it can produce is crazy.
Option 3 is to use a 3d printing service

When you have the mold parts you need
Platinum cure silicone (platinum, that's important), ecoflex 0020 wich comes at about 40€ per kg
Silicone pigments, like 10€ a tube.
And a vacuum chamber. Costs about 160€ for a set
And a protective coating like XTC-3D for 35€

Coat the mold in xtc-3d and let it cure for a week
Mix together the platinum silicone parts with some pigment, and quickly put it in the vacuum chamber to degas it.
This is important to make it body safe. Otherwise there would be tons of tiny bubbles trapping body fluids that starts to rot.

When you cast the silicone wait a day but then it should be good.
The silicone should not feel sticky wet, that means the silicone didn't cure properly.

And expect to fail a few times.
And uhm don't let it near any latex, latex is the death of silicone.

There's a Reddit page called r/diysiliconetoys that offers more advice.
Desytro
Desytro

I guess we could do something like this
How about this, you make a list of designs you like and I make a neat discount code for you that your viewers can use too.

Btw you don't plan to just print and use them? It would be dangerous to use them like this, like what if it broke in half while using it? :s

laura_jk3011
laura_jk3011

Well then the two designs I linked should be great for any medium advanced person! And don't worry i've done this before I will simply use 40% infill with a condom on the dildo. It usually worked great ;3
bleibark
bleibark

Скажите а можно купить готовую модель?
emjrabbitwolf
emjrabbitwolf

Hello, I’ve not purchase any models yet, though there are two I wish to blend together to get what for me would be the perfect sex toy!
Do you take commissions or listen to ideas at all? As if I did make a commission, I’d want it available to others. I’m fairly certain I’m not the only being on the planet that wants a toy that has a canine knot AND the delicious feline spines!

Desytro
Desytro

I think I could get the kaelis design and inflate the shaft to a knot like shape and it would look quite decend. Doing that would not be too much effort.

I'm going to be occupied with something else till the week after next week so you'll sadly have to wait a bit untill I can make this. I can update you when I'm done.

  • 2 j’aimes
emjrabbitwolf
emjrabbitwolf

Yeah, that's something like what I thought.
The top of the shaft similar too Kaelis, but the lower section is more like the Knotted fantasy Penis.
Trying to create some weird mix of canine, feline and lagamorph is fun =0)
But your designs are so close and could work as a base for the creation of such.
ArtDaYeen
ArtDaYeen

Hey there, it's me Art! I'm an indie toy maker and owner of Art After Dark Toys. I just had a few questions about the Equine collection. As far as attribution goes, like what would you like me to put as far as designed by, like year, etc. if I were to print and make toys to sell?

Desytro
Desytro

Hello, thanks for reaching out to me.
I suppose something like "Desytro @ cults3d"
I don't have any pages other than here so people know where to look if they want they want to see more.

  • 1 j’aime
ArtDaYeen
ArtDaYeen

Ok! Thank you so much for reaching out! I just happened upon you looking around late one night and you're models are amazing! I saw in one of the comments that this is more of a hobby for you (I always try to check to see if my question has already been answered before asking lol) but there is a pretty big community out there for makes you should definitely look into. 😸
hsdhsdvuj222
hsdhsdvuj222

I bought the Pink model, but after ing and unzipping it, it was a different model. You can it and send me the correct model

Desytro
Desytro

Oh damn, did I put the flyper dildo inside the fink zip folder?
I'll fix this as soon as I get to my PC today.

What a slip up on my side, I'm really sorry.
I can offer you (and the others who bought it ) a 100% on a design of your choice to make up for my mistake.

Desytro
Desytro

Okay I fixed it!
TheJainator
TheJainator

Just wanted you to know I've printed and cast two of your dragon dildos and plan to do some more. I thank you deeply for being one of the few competent people in the Naughties section and I can't wait to see what you post next.
https://files.catbox.moe/wkypbl.jpg

Desytro
Desytro

Thank you and also those pours look really really good!
I'm not getting much done lately though, a Horse inspired masturbator is in the works but not much else.
I'm always open for suggestions though, especially from people who use my designs. Like, the Dragon breast was an idea pitched from someone who did the kobold.
If you've got something you think I'm missing just tell me.

TheJainator
TheJainator

Hey Desytro, been a minute. A friend of mine is doing a video project which needs some fantasy dildos. Just wanted to know if this use sits right with you, as well as seeing if you have some sort of digital tip jar so we can give back some more for your great designs.

Also if you are still taking suggestions, we also need a regular human-shaped on if you’re interested.

Desytro
Desytro

That's just fine if you want to use them for a video.
I'm currently busy with other stuff sadly, if I get to 3d modelling again I might finish the one that's TotK Ganon inspired haha
gerbenstokkink
gerbenstokkink

Hi i bought the dragon collection one. But i keep getting a error with Snorri leftside. The programs says it is missing a part. Could you help out please?

gerbenstokkink
gerbenstokkink

nvm, i fixt it with the settings.
starving_artist
starving_artist

All of your purchasable files are Private Use only. Is there anywhere I can pay you for the files and the rights to make and sell the finished items for commercial use?

Desytro
Desytro

I should have some set to comercical use... I'll get through all of the them and change it.
Are you going make some Silicone Dongs with those?

  • 1 j’aime
starving_artist
starving_artist

Yeeeee but I want to do the right thing and pay you for the license.
aidancrowther
aidancrowther

Hi, I just purchased your Cyberpunk P.U.S.I model and was just hoping to ask for something. I am trying to print this on FDM rather than on resin, and as such would prefer a slightly chunkier version of the front piece model to print. As is is a rather detailed mesh Fusion is struggling to convert it for me to modify. Is there any way I could possibly get the source file for the front piece to modify it? Absolutely no problem if that's not something you can accommodate, I can make it work on my end if need be :)

I also just wanted to mention that analysis of the model seems to be saying that the front piece mold is not closed. This doesn't seem to affect the ability to print this model, but I figured you might want to know.

Thanks for your awesome model!

Desytro
Desytro

I added a new front part, just it again, it's called Cyberpussy_Front_2.stl. I hope that will work out for you.

  • 1 j’aime
aidancrowther
aidancrowther

This is exactly what I needed, thanks!
XaviusNight
XaviusNight

Hey there; I recently bought some models from you, and then I got a message saying I was getting refunded because I supposedly "marked the item unsatisfactory" but neither I nor the site managers know what's up there. Is there a way I can send you the money for the model another way? Cuz I still got the , so I don't know why it'd be refunded.

Desytro
Desytro

So you bought the "Dragon Wyrm Dildo Type: Hemis" one and the " Dragon Dildo Collection Vol.2" but the collection 2 already includes the Hemis.
So I refunded the Hemis purchase because you don't have to pay twice for it.
It's odd that it got marked as "unsatisfactory" though. On my Sales page I get the option to "Refund customer" and it realy doesnt say any more than that.

I'm sorry about the confusion, from now on I'm going to notify the people before I do this.
MIRIRIDDUDDU
MIRIRIDDUDDU

Hello, I purchased DRAGON BOOBS modeling and tried to print, but it keeps failing.
I think it might have something to do with the cold weather or the capacity.
Can I use a site that reduces 3D file size?
In the result, the file size was clearly reduced, but I am not sure if the internal modeling was damaged.
If you don't mind, could you please check your email just once?

Desytro
Desytro

Hello I'm very sorry that I didn't imeadiadly reply, I forgot about your email over the Holidays.
The File you sent me looks fine I see nothing wrong with it.
I also went ahead and lowered the polygon count on both the mold and the boobs. they are now under 50mb and you can them from cults.
3DdruckSachen
3DdruckSachen

Hi hast du die pferdepenise eingescannt von nem echtem pferd

Desytro
Desytro

Nope, 3d sculpted.
hazydragon
hazydragon

I was idly wondering. The werewolf sheef looks almost perfect for a project I was looking for... But I was wondering if somehow you made an equine one. Maybe simply... well, remove the 'tool' from the equine variant, pinch it up, and done.

But, I understand if you can't. Just thought I would try. Thanks for the great work!

Desytro
Desytro

There are some additional difficulties with making a mold for that but I think I can make it a variation of the Horse Sheath.
I don't know how fast I can get to working on it.
Ca. 1-2 weeks.
I'll give you an update when it's done.

Desytro
Desytro

https://cults3d.emulatorsite.com/en/3d-model/naughties/wearabel-penetratable-horsecock-with-mold

I got you fam!
hyfvenom
hyfvenom

i bought your werewolf sheath model but im having trouble printing it due to the size of my printer. Is there a version for smaller printers like your meru model

Desytro
Desytro

Hello, sorry I took some days to reply. I edited the Mold part to be a 4-Part mold, it again and see if it works, If it's still to big then I could refund your purchase.
sourcoyote
sourcoyote

Hi there, are you open to doing commissions? We love your models & would love to get some done for a potential project. Please let me know what the best way to get in touch would be :)

Desytro
Desytro

I tend to do these things as a hobby, so I'm not realy open for comissions I'm sorry. Thank you though for regarding me.
MIRIRIDDUDDU
MIRIRIDDUDDU

Hello, can you tell me how many liters of silicone were used to complete LINNET THE SEXY KOBOLD?

Desytro
Desytro

It's finished volume 0,93 Litres
That's when you don't rescale any of the parts.
If you are looking to buy a 1 litre bottle then you might want to make the Mold ~10% smaller!
Because there's probably going to be a bit of silicone spilled, left in the containers or creeping out of the the mold if you use the direct mold type.
jubiniboy
jubiniboy

What settings and orientation do you print your molds? Looking at linneth there are lots of places cura wants to auto . did you just deal with sanding and smoothing afterward?

Desytro
Desytro

Well I printed them kind of like this -> https://imgur.com/a/qTo9tnq
Although to be fair that is scaled to 80% the original size because my printer (Elegoo Mars Pro) is very small, I was abel to print it in 100% size by rotating it clockwise when you are looking exactly at the walls that are pushed together, the s were trickyer but still managabel to do without adding s to the inner mold walls.
If there's something I can do to help then you can always just ask here