I'm a player, I'm a maker.
For commercial licence rights please visit my Patreon page or me.
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇷🇴 Pays du membre : Roumanie
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Any chance for one for the Seraph engine? https://www.scalarairsoft.com/seraph if you need measurements the owner can be ed on his discord
Hello, I'll check, maybe I can get a dummy CAD file of the engine, or if you already ed him and you can provide a CAD it would be possible
I don't have cad files but I'm sure if you Reihm he will provide them to you.
I spoke with Reihm, he needs the serial number of the engine, that he identifies the batch
Anyway you can make Kythera & Maxx P hop up combo :)
Hello, this one? https://cults3d.emulatorsite.com/:2813318
Sqb style
Ok, I'll make it
Hello, just created a version for the Kythera https://cults3d.emulatorsite.com/:3043688
Bonjour, je m'intéresse a votre dessin de Kythera en v2, je travaille sur un projet perso ou intégrer le Kythera, accepterier vous de me vendre uniquement le schéma du Kythera seul en STEP? votre prix sera le mien
Hello
I've recently re printed the VSR10 Airsoft Sniper rifle MRAD body kit and all is well so far but could you let me know how many M3 bolts and also what length you used (also the length of the M5 bolt you used)?
In addition to that I've printed the rail in 3 sections due to printer size so how would you advise connecting them together?
thanks
Hello,
I have to look for the model, and count the screws, I'll create a short assembly manual.
Regarding to the handguard, it has those 3mm holes, I recommend to use some rods, it helps with the alignment and it gives more stiffnes, you can use 3mm threaded roods, or 2.5-3mm carbon fiber roods, or 2.75mm filament.
Regards,
Andras
Hello, there is a picture (the last one) with the screws for the M98B, the MRAD kit is on the same principle.
Hello
I am interested in one of your carbon uppers.
I am only looking for a combination of the inferno gen 2 together with an original mtw hop-up. And is it possible that one of your designs fits on a heratic labs from wolverine?
Kind regards
Hello,
In theory the MTW variant should fit, due to the proprietary receiver, but at the moment I don't have a design for the original MTW hop-up, I'll try to get one and create a design for it. I'll keep you posted.
Hello,
So if I understand correctly, one of your carbon uppers will fit on a Wolverine MTW Lower Receiver? Without any modifications to the lower receiver? And I am looking forward to installing your carbon upper on my Heratic Labs
Hello, Yes, the MTW carbon upper .... Named ones will fit, they were designed for the inferno gen 2 mtw engine, but I can adapt it to the inferno V2, if you could use a maxx, begadi or silent V2 Hop-up, if not I have to get an MTW Hop-up to model it
Hello,
Do I need a MTW Maxx hopper or just the normal Maxx? And what I mean is if the carbon upper fits on an original mtw lower. Because in your videos you use a different lower. The wiring to the trigger board of a mtw is also different than in your videos.
Hello,
Check this design, https://cults3d.emulatorsite.com/:2729794 , in the Make section you can see it mounted on the MTW receiver, most of my designs are for the normal TM standard receiver, but on request I made 2 MTW specific designs as well.
Hello,
You say that there is a big chance that a long nozzle needs to be in the hpa engine. At least 1mm longer. Is that necessary or is that just recommended? If so? Which nozzle?
Hello, if you are facing issues with max FPS limited than the longer nozzle would sort it out, the silent industries nozzle could be a solution.
Hello,
Do you perhaps know a solution that allows me to tighten a tracer to the front?
Hello,
There are included in the zip a few front adapters with different thread sizes for the most common tracer/silencer adapters, personally I'm using the mb03 adapter.
Hello,
Okay, to print or? I'm going to start arranging the materials. I'm looking forward to making this. I hope all is well.
Hello, the front cover is to be printed, but you need a silencer adapter, the adapter will be inserted in the front cap, in this way the tracer would be threaded on a metal part. I made a build with longer carbon tube, my tracer fits exactly in the tube (it needed some sanding because it was to tight fit), in this way the front cap isn't needed anymore.
Hello, how are you?
You would have the V2 gearbox for gate pulsar D and hopup maxxmodel that fits in a G&G cm16
Hello, this is the one for Pulsar D with Maxx Model, it fits the G&G CM.
https://cults3d.emulatorsite.com/:2050041
"M4 carbon tube upper & alignment kit for Wolverine Inferno MTW & Maxx Model"
I have originally mtw with inferno gen 2 with basic specna arms HU unit. This make possible to use MTW version inferno gen 2 with the upper? srry my english is not the best.
Hello,
Unfortunately it won't fit the specna arms Hop-up unit, it's designed specially for the Max Model Hop-up unit.
If you consider to replace the Hop-up unit, I have several designs, for Maxx Model, Begadi, Retro Arms, Gate EON, but I didn't done one for the specna arms one, most people are upgrading the Hop-up unit as well.
Regards,
András
Salut! Ai montat upperul și pe un mtw? Sunt curios cum pot face ul dintre engine și board?
Salut, modelul a fost făcut la cerere, in colaborare cu clientul, el a testat-o și da, au fost modificări să facă .
Hello Cube_Tech!
Really cool Skoda VRS 60mm rim/hub caps!
A friend of mine printed me them already but they do not fit that good on my Skoda-rims...
Therefore it would be great to get the .SKP-files or the .DXF-files of these Skoda VRS 60mm rim/hub caps.
Can you send them via mail?
Hope you can help us in this case because I really like to see that hub caps on my car! ;-)
Best regards an thank you very much in advance,
Michael
Hello, this cap is designed for Momo rims, with 60mm hole. If you could you measure the rim's hole, and I can adapt it for you.
Hello again!
Thanks for your reply!
The rim/hub cap should be for an original Skoda Ignite rim and it is quite difficult to send you the exact meassures you will need to adapt it...
BUT:
I can provide you with an original rim/hub cap from Skoda that fit perfect into the hole in my rims! Would this be also ok for you?
And, ist there a ibility to get the file ONLY for the round rim/hub cap without the four clamps on the back?
I really would like to build the rim/hub cap on my car but therfore they need to fit my rims perfect!
Looking forward to hearing from you,
Michael
Hello, send me couple of pictures to [email protected] and we'll check ;)
Hello again!
What pictures do you need?
Some of the original rim/hub cap from Skoda and/or from the rim?
Best regards,
Michael
Hello,
From the original cap
Hello, could you provide some more additonal info for your V2 gearbox for Gate Pulsar D & Silent Industries Alpha hop-up chamber , model, such as with what filament its recommended to print with, and more aditional settings such as , print side etc, tyvm. I am using bambu printers if its of any help
Hello,
I'm printing it with PLA+, ABS or PETG is good as well, CF or GF filaments have the tendency to increase the walls, so it may need some cleaning on the inside, where the Hop-up chamber and engine is.
is needed, because you have to print it with outer face towards the print bed, with other orientation there could be some dimensional issues, it's a bit tedious to remove the , but this gives the best result.
At least 4 walls and 45% infill.
Let me know if you need more info 😉
Regards,
András
Im having issues mainly with the orientation of print, do you mean the inner side should be towards the bed or outer side towards the bed?
Also what layer height do you suggest
The outer side towards the bed, layer height can be 0.15 0.2 with 0.4 nozzle, or 0.2 0.3 with 0.6 nozzle.
https://ibb.co/F4F18B1Y
So this would be correct orientation?
I also did 0.16mm, s 5 walls and 60 infill gyroid
When you purchased this design? Because I don't see any under your name. Or you ed it with a different ?
My friend bought it so i can print it out for him, if some kind of proof is needed lmk
If you could confirm the orientation it would be very helpfull tyvm!
Outer towards the print bed, only like this you can get the right dimensions.
Im having some issues with english language, but im gonna assume its like i sent it on the picture, if not il play around with it more, ty for the info and nice model!
Check the last picture what I just ed, it's the orientation in the slicer.
Thank you alot, that exactly what i was looking for!
Hello, everything ok with the build? It would be great if you could post couple of picture in the Make section.
I will I am still trying to finish it up, printed with ABS first couldn't get rid of s D:, just finished PLA print once i do some finishing touches and clean it up i will post it!
Hello, I am interested in Your product but for diffrent combination, I cant find gearbox for gate pulsar d and silent industries hop up.
I saw that You have gate pulsar h and silent industries hop up combination, and I was wondering could You make the combination that would work for me.
best regards.
Hello,
Yes of course, I'll do it and let you know when it's available for .
Regards,
András
Thank You
Hello,
I've just ed the Pulsar D & Silent design, https://cults3d.emulatorsite.com/en/3d-model/game/v2-gearbox-for-gate-pulsar-d-silent-industries-alpha-hop-up-chamber
Regards,
Andras
Hello,
I have a wolverine reaper gen 2 and a begadi pro neptune chamber in my HPA M4. Does one of your printing files work with this combination? I need better alignment between these two.
Hello,
This is what I think about
Option 1: you could use the V2 gearbox design for the Begadi https://cults3d.emulatorsite.com/en/3d-model/various/v2-gearbox-alignment-body-for-begadi-pro-neptune-hop-up-chamber
Option 2: I could modify the inferno one, but for this I'll need your , since I don't have the Reaper engine, I will need some measurements.
Option 3: I'll Wolverine, and I'll try to get the CAD of the Reaper.
Regards,
Andy
I think I can give you measurements as long as they are not to complex. Tell me what you need, I´ll give my best!
I assume the rear part is wider than the inferno, please could you measure the width, and the length from the front until the place where it starts to be narrowed down
Can you please send a picture of what you mean?
Here are the pictures
https://ibb.co/WdPF25j
https://ibb.co/spksjgKW
First picture: 1,8cm and second picture from left to right: 0,5cm / 2,97cm (its not quite 3) / 5,2cm
Ok, thanks, I'll rework the inferno, it may need a test print, that you check the fitment
I wrote to wolverine, that can't share the design of the reaper 😞
Yes, I´ll give you !
Hello, just ed the files, let me know if any adjustment is needed, a split version will be available in couple of days.
https://cults3d.emulatorsite.com/en/3d-model/game/v2-gearbox-for-wolverine-reaper-gen2-begadi-pro-neptune-hop-up-chamber
What do you mean with split version? Isnt it 2 parts to print which I scew together?
Split version, like for split gearboxes, the bottom part separated, see my other designs
Hello,
Is it possible for you to design a standard GB v2 for AR15 for a Kythera and a standard rotary hopup chamber? Because the only Kythera design you have is for SR25.
Hopup chamber I own (I can provide you with the 3d if necessary): https://www.taiwangun.com/hop-up-chamber/the-rotary-m4-m16-aeg-hop-up-chamber-zci-2
Thanks in advance for your reply.
Best regards,
Q.
Hello, that would be possible, I'll be back when I have the design.
Regards,
András
Hello, I've checked, your hop-up chamber is very similar with the Pro Win hop-up chamber, I've created only the front part, could you check if it fits the hop-up chamber.
https://cults3d.emulatorsite.com/en/3d-model/game/v2-gearbox-for-polarstar-kythera-prowin-hop-up-chamber-ab0df04d20eb9aac1ff7
OK, I'll give it a try, but the link you gave me sends me to a 404 page of cult3D, so maybe you left it ‘Private’, mistyped URL, copy-and-paste error, broken link
I don't know why link wasn't OK https://cults3d.emulatorsite.com/en/3d-model/game/v2-gearbox-for-polarstar-kythera-prowin-hop-up-chamber-fe4c4cd71aeaddf3e2d7
Link OK, I test it afterwork, Yes is a Prowin clone
I've replied with photos in the ‘Make’ section of the proto.
Hi, have you progressed any further on this project?
Best regards
Hello, I was busy with some other designs, I'm working on it
It's ed, please check the new files
I'll print it out overnight and assemble it later. I'll send you as soon as I can.
Thank you for a high quality job :)
Hi, there,
Everything looks like it can be put together but the sets are very tight, both for the Kythera and the hopup.
The lugs in the cylinder to secure the kythera are well thought out, but the edges need to be chamfered to make assembly easier, especially as the hopup has to be ‘pre-assembled’ on the kythera before inserting them into the slot, and that's a bit forceful.
In any case, thank you very much for this design, I'm going to modify it myself so that it matches up well with my KAC PDW and my configuration, I'll share the final results with you.
Can the gearbox be printed on a 180x180 printer?
Hi, I wanna print your polarstar jack and maxx design. But can I use the maxx m4p for polar star model
Hello, that's totally fine, I've tested it with the M4P as well
This is a great design. I am wondering if you can add to the roof/top pieces so that they don't have be printed separately and glued on?
Sorry, just to clarify. This is for the Boxabl casita. I printed my first one and would like to print a few more
Hello, give me some time, it's an old design, I have to search for it in the archive, I'll create a design with attached roof.
I've updated a vaersion where the roof of the kitchen&bath is attached
That was fast! I will try to clarify because I don't think I explained my issue very well. I like the roof over the kitchen and bath and I don't mind screwing it on. The problem I have is that there are no hinges to connect the 3 roof pieces together so that the roof can be easily folded and unfolded. The hinges on the side walls and floor work great. Something similar to the side wall hinges and floor hinge on the roof would make the model really nice
The issue is that the roof folds 180 degrees, the walls only 90 degrees, the same mechanism can't be used, for easy printing the hinges are separately, so they have to be glued
I'll check if I'll find a different solution for it
Done, I improved the top hinges, I hope you'll like it, there are still 2 hinges, what you have to glue in, but they have recess for a better fitment.
Have you heard any difference with the "chambers" and the fully foambased?
MTW carbon tube upper & alignment kit for Wolverine Inferno MTW & Maxx Model.
Hi i run in for couple issues 1 engine joke sits to high not making . 2 upper cover holes not lining up with rear part 3 all sample parts have two windows for hop to just but not upper cover. Please give me your email will send some pictures.
Hello, sorry to hear that, please send me couple of pictures, and more information. My email address is [email protected]
Hello is there anyway that I can print this and sell it to people.thanks
Hello, we can discuss about it, send me a mail to [email protected] and let's talk about it.
Hello is there anyway that I can print this and sell it to people.thanks
I've updated my Patreon page with the latest content, you can chose between the agreed package or one of the Patreon tiers, more details here: https://patreon.com/Cube_Tech?utm_medium=unknown&utm_source=_link&utm_campaign=creatorshare_creator&utm_content=copyLink
Hello is there anyway that I can print this and sell it to people.thanks
Hey, just to let you know, the mrad kit for tm vsr doesn't directly fit, there is a fair bit of modification needed.
Hello, sorry to hear that, please bare in mind that 3D printing isn't 100% precise procedure, many things can vary, the printing recommendations were respected? If yes please could you send couple of pictures with the problems, and more info. If an issue will be identified I'll correct it, or improve the design.
Hi.
I am interested in printing the following upper.
M4 CARBON TUBE UPPER & ALIGNMENT KIT FOR WOLVERINE INFERNO MTW & MAXX MODEL
Does this one work with an Mtw Billet Gen 2 Lower assembly?
Best regards
Hello, I've checked and the MTW Billet lower receiver won't fit, I'll create a variant for the MTW lower, but it will take some time.
Hi.
Thank you for your reply.
I am Looking forward to that variant!
Thank you for your work!
Hello, the design is ready, I didn't managed to get an MTW lower, to check it, if you would like you can print it, and check it, in case of any issue we can discuss, and improve the design.
Hello. Really big fan of the AR grip/stock with the mag holder. Had a few questions first. Can it be adapted to have the cheek rest from you other variants? Does the stock fit over a standard buffer tube? Mag well fit standard mags?
Hello, thanks, I'm glad that you like it.
Please could you give the design name or number of the other design, the cheek rest donor one, and I'll check if it can be done.
The design is made for standard buffer tube
It's only the grip and butstock, the lower receiver isn't included.
I am sorry for the confusion, the mag well I was referring to was the one on the stock, not the lower. The other stock in question was 2 actually. They are in your airsoft section under ar stock
A bit closer, but still not sure which one you're refering to 😁, there are a few designs
The mag well was tested with standard Airsoft mag.
Design number 1134278, 1094630, 926001, 318445 all have great cheek rest designs.
Ok, I got the idea, an adjustable cheek rest is what you are looking for, I'll combine them, and let you know when it's ready.
Any luck sir?
Hello, sorry I didn't managed to finish it, I had a week off flu 🤧, wasn't able to do anything, I'll let you know as soon it's done
Hello, I've ed a new model, it's what you were looking for? https://cults3d.emulatorsite.com/en/3d-model/game/ar15-m4-grip-buttstock-v2
Hello, I have a question or a concern.
I have an Arcturus GR16 with Wolverine Inferno Gen2
Would you have the possibility to design a gearbox where a Gate Aster2 V2 can be used?
Currently a microswitch is installed with the Wolverine FCU.
I would be very grateful if you could design a suitable gearbox.
Kind regards
Thomas
Hello,
From what I've seen, the Arcturus GR16 has a reinforced V2 gearbox, that means that my V2 gearbox shell design would fit. In one of my builds I'm using the Gate Titan, there is absolutely no difference between using a mechanical board or an optical one, both have to be in the same spot, please could you elaborate your concern, because I don't think there is an issue.
Regards
Andy
The problem is that the Arcturus GR16 does not have a standard V2 gearbox. Where a Gate Aster or Titan can be installed.
It is a modified gearbox with a microswitch.
The outer shape of the gearbox is the same, no? If yes it will fit, if you need some adjustments I can do it for you, or if it's no-go I'll start a refund.
If you could create a customized one for the Arcturus gr16 would be great.
I'll check if I can get hands on a gearbox, if not it will be only a question if it fits or not. Meantime you could check my V2 gearbox lower part if it fits in the Arcturus, send me a mail to [email protected] and I'll send it to you.