44 commentaires

Hi! Can you tell me the overall size of the grip for the Anbernic RG ARC? I want to buy it, but I don't know if it will fit my printer (it's custom). Thnks

Any chance you can make a Retroid Pocket 5 grip like your RG406H grip? (sits flat across the bottom, textured grip, the lip that curves up around the devices edge) I love using that on my RG406H.

Hi There, I was wondering whether you are going to add the Retroid Flip 2 grip for ?

Hi I'd like to buy the Model for retroid pocket flip 2 but I don't see it listed here.

Hi I'd like to buy the Model for retroid pocket flip 2 but I don't see it listed here.

Hey! I bought the 3d model and printed the grips and i really love them, great job!! Just found a couple of issues that i would like to fix. they lack the fps button hole as well as the controller release button is kinda snug. Do you by any chance have an updated version of the 3d model? Or can provide the file with editorial rights so i could edit/model in the buttons and make the adjustments needed? :)

hi, i bought the ps5 comfort grips and only right grip file. cant find a left grip file to print.
any help appriciated.

Hi there! Would it be possible to create a stand or dock that fits the Comfort and Portable grip cases for the Retroid Pocket 5? I’d love something that lets the device stay in the grip and stand upright when not in use. Bonus points if you could also design a snap-on lid or cover—something like the Steam Deck Killswitch case—so I can safely toss it in my backpack without worrying about damage or accidental button presses. Thanks so much!

Hi Rob, thanks for the update, didn't realise, I could use the mirror tool. Thanks once again.

Hi Rob, I purchased the grip for the Rog Ally, however, I only have the right hand side grip, there is no left hand side grip in the zip file.

Hi! Two quick questions for you!

1) Do you have a screen cover that can fit with this grip case? Would love one so I can quickly cover it and throw it in my bag to go!
2) Do you have a stand or “dock” so I can leave my RP5 with the grip case on it stored upright and plugged in for charging?

Hello! How does your Retroid Pocket 5 comfort grip differ from your portable grip?

Hello, I want to purchase your RG40XXH Grip, but the Horns are but the horns are split in half and fall short in my hand.
Could you make an edit with the full Horns? Something like this image: https://ae01.alicdn.com/kf/S4f9f12d6f7854c3bbdf2d352505335417.jpg

Thanks a lot!!!!

Hey! I was wondering if you had a file prepared for a bambulab a1, I already got the stl file for the rog ally x, but it doesn't attach well and I dont know what's the issue or how can I fix it

I have purchased the comfort grip for legion go . Right grip prints well and gets detached as well . But the left one does not separate . I have tried printing number of times but same problem .

Hi there, purchased the files a couple of months ago, just recently got round to printing them. The quality is brilliant everything prints great apart from the 2 halves don't separate I can't seem to figure out why they end up ed as you can see the seam but the inside of the part has somehow created a weld going over the seam so any advice on how to fix that would be great. Otherwise it prints perfectly without any issues.

Hey, I've been charged twice for the same file!

Hello, could you make a grip for the Powkiddy X55? I haven't found one for this model yet.

Hey I just bought the comfort grips for the Lenovo Legion Go but I would like to buy the entire package if possible. Could you charge me the $4 difference and provide me with the full set?

Hi, I bought the Comfort Grips for Rog Ally X yesterday, but after printing when using them I found too big for my hands. Would be possible to change the purchase for the portable ones, please?

Hi I wanna buy the Comfort Grips for Lenovo Legion Go but first wanted to ask if it will work on my resin printer and would the print size would come out correctly or would I have to do adjustments

Hello, i bought the portable grips for ROG Ally and in my slicer there is only the right grip. Can you send me a file with both grips left and right please?

Hello, I bought a stl file from you FPS grip legion go. And I have a problem, the triggers do not stick to the model, they print separately, it does not look at all like in your pictures. Please help quickly

Hello!
Just got your legion go comfort grips and got them printed out and ran into an issue that you might want to fix in your model.

On the right grip has a very small amount of material on the inner side of the clip that adds no structural integrity and causes tool pathing issues in the two most popular slicers (cura and prusa). The main issue with this small bit of material is that it causes the slicer to break the layer on the back side into multiple pieces and that small bit of material is printed alone causing a build of material on that spot. Once the material has built up it squeezes out and binds to the other side of the part causing the clip to no longer function.

I know this might not be a huge issue on higher end printers but on my old and modified ended 3 that small piece of material has made me reprint the part twice and had me loosing a bit of hair in the process tbo.

I have the modified model if you’d like it and a video of the issue and a picture of how my mod fixed it.

Again I really like the model!
Thank you!

How should I place the Lenovo legion go grip to not use ?