84 commentaires

No creo que se pueda reducir tanto, pero no he trabajado nunca con impresoras de resina. Si lo quieres hacer con filamento es un rotundo no.

Yes, you bought my Opel Blitz model. Thank you.

Thanks to you

The scale of the Opel Blitz is 1/14

Gracias, pero no son modelos quee gusten mucho, así que no tengo previsto diseñarlos. Tampoco hago diseños por encargo, lo siento

Te has de descargar el archivo en tu ordenador y luego descomprimirlo, es un ZIP.

Hola, no, lo siento, no hago camiones ni maquetas por encargo. Un saludo

la cabina

Lo siento, no hago este tipo de trabajos por encargo, pero agradezco que haya pensado en mi.

Hola, si los entrego en stl, en algunos casos ademas de todos los stl de las piezas, adjunto el modelo ensamblado y este lo entrego en 3mf

De acuerdo, estoy interesado en el "Vejete" pero necesitaria que me enviara los dos formatos tanto en stl y 3mf. Si me lo confirma procedo con la compra. Gracias

Hola, el vejetes solo tiene todas las piezas en stl. No hay un conjunto en 3mf.

Hi, yes you will have problems. Many of them can be solved, but it takes a lot more time and manual work. I wouldn't recommend it, but I've never had a resin printer.

Hola, muhcas gracias, creio que ya hemos comentado. Los modelos estan completos, segun lo que aparece en la foto. Hay algunos camiones que la caja es un elemento aparte, pero ya aparece en la foto y se indica en la descripción

hola si ya hemos hablado pero te habia preguntado antes por aqui..... jejej

This is exactly the model I was going to design before getting into RC, I want to do it, but honestly, I don't know when it will be possible.

I think it would be very worthwhile. There is tons of indy fans out there and very little fan items available. It’s all custom made stuff. Your work on the Opel and ccwk is the best… if you was to make the raider truck that would be an amazing addition. Take care and hope to one day see it available. Heck you could modify the Opel chassis and just put the L3000 cab on the front… cut a lot of time off the process. No need to re-invent the entire thing.

Thank you for your comment.

La verdad es que tengo un poco abandonado los camiones y furgonetas de España. En un futuro, puede que haga alguno de esos, pero tengo pendientes otros modelos antes

De acuerdo Carlos, a ver si te animas en un futuro con alguna.
Muchas gracias por tu respuesta.

This model comes without a trailer. There is a who made one for his own.

I would really appreciate it if you did.

I am very sorry for the inconvenience. It was my mistake, I did not include that folder in the compressed file. I have already fixed it. Thanks

Thank you so much, I will re it. Great work by the way! It's been very fun putting this together

Also, it would be REALLY cool if you did an excavator. I like how your models have many parts to print and build.

Hi, I just ed the new zip file called P133_1-18 and the PuenteDel folder is still not there as well as the top part of the engine that is indicated to be in the motor folder on the directions. Thanks

Thank you. I am really sorry for the inconvenience. The problem is that when I a file with the same name, even though the content is not the same, cults has not changed it. I have had to rename the zip file. I hope that now I have everything.

Thank you so much, I have the PuenteDel folder now, however, I didn't see the top piece of the motor. I took a screenshot but don't know how to send it to you to show you what I'm talking about. It shows it on page 17 in the instructions. Did you put that piece in a different folder on this last updated zip file?

I've seen the problem. I feel so inconvenienced, it's the first design in which this happens to me. Now I can't add that piece, as soon as I'm in front of the PC, I'll the zip with that missing file again, but it will take a while. If you find more missing files, don't hesitate to let me know.

ok, thank you. I'm sorry to keep bugging you.

Thank you for your understanding and patience. I have ed the missing piece to the folder indicated in the instructions.

It is where it says, in the folder:
STL/Motor/Transmision1.stl
I'm out and can't keep an eye on it. But if you continue to have problems, I'll try to handle it as soon as possible.

Yes, thank you!

Thank you for your understanding.

Hello, can you tell me which model you are referring to?

BMW R75

Page 28 of the BMW R75 owner's manual is for the installation of the right cylinder head. I have checked and the files are located where indicated at the top right of the page.

https://app.box.com/s/kmwpckfw4fz549e25u7tzicrf093huwc

Hi, I may be missing the overall measurement of the model, but sometimes the mirrors or antennas stick out.... I'll give you the specifics of the model, measurements between rims 145.27mm
Measurement from the floor to the roof of the cabin 147.2mm
Total length to the rear hook: 600.945mm

I hope it helps you

With a 0.4 nozzle it will work fine and the filling you want, 10 and 15%, the interior parts I recommend printing them in PETG

differential or cardan which drives the rearwheel which i cannot find

in foto/captura1.jpg, the bright part

found it in the motor folder

It seems that you have found it, sorry if there is any mistake. Normally in each step of the instructions, I indicate the folder where the files are located and I have also created a PDF version in English. I am sorry for the inconvenience and I would appreciate it if you could put the photos of the finished model. Thanks

Sorry, I don't provide the step files. Only the STL files and also accompanying the design are the 3mf files of the complete design, in a glassed or unglassed version.

Sí, no miro los avisos sino simplemente el desin si me conviene. gracias por la actualización pero el resultado no es adaptarse a la impresión líquida. voy a recurrir a otro dibujante. Gracias por el esfuerzo.

Los ajustes son falsos en el nivel de los ejes, otros s tuvieron que poner masilla porque la junta es muy mala como si se ha cortado 2 veces y 1 copia de cada corte!

Siento leer eso. Yo cada modelo, antes de ponerlo a la venta, lo pruebo. Indico que es para impresión FDM, pero además incluyo un completo manual, en la descripción de los artículos, que siempre aconsejo leer antes de comprar. Siento su decepción, pero culpar a mi modelo, no creo que sea lo correcto, ya que no está ni siguiendo mis instrucciones de montaje. Muchas personas han impreso esta motocicleta, algunas las puede ver en la sección de makes del artículo.

Hola. Intentaré poner una versión completa en stl de la moto. Los archivos son correctos y otros muchos s lo han impreso de forma correcta. Hay muchas piezas ya que es modelo preparado para imprimir en FDM sin demasiados soportes. En su caso, imagino que quiere imprimirla en resina y le está costando unir los diferentes stl. Como digo, intentaré hacer un stl de la moto completa y le saldrá un aviso, como dice, en cuanto haga la actualización.

Gracias por comprar y un saludo

Ya he añadido un stl y un 3mf con el diseño completo.