Love to design easy and more complex files for fdm 3d printing.
Printing with a Opiliones delta printer, Ender, creality cr10 300 and cr10 400
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇳🇱 Pays du membre : Pays-Bas
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Hi there,
I have an old version (2013) of the thomas and friends deluxe roundhouse. It's missing a turntable and I cannot find appropriate pieces online. Are you able to design this for me so I can get it printed?
Hi there,
For this you need al the exact demensions of the turntable and a lot of time to design it. For now i simply have not the time to design this and i don't have any demensions or construction of the rotatingparts. So i'am sorry but i can't design this for you richt now.
hi there, do you have a santa hat to attach to the giant lego skeleton for the transition from halloween to christmas?
i'm soor but i don't have any files of the santa hat.
guten Tag,
Ich drucke mit dem Anycubic S
zum Slicen benutze ich das Standartprogramm mit Standart einstellungen. Jedesmal ca bei der 5 runde vergisst das programm den druckerarm zu heben und haut somit das Obere gedrucke weg. daher hätte ich gerne das geld zurück erstattet.
Goedendag,
Er zit geen fout in het model en zo te lezen staat er ergens bij de slicer instellingen iets niet correct of leest de printer de slice bestanden niet goed.
Dit staat los van de stl file.
Verplaats het bestand eens van plaats op het slicer bed en slice hem dan nog eens. Via de slicer preview moet je kunnen zien wat je printer gaat doen. Staat hij daar goed dan is je slice bestand ook goed. Voor je een print maakt check ik altijd de slice om te zien of deze goed gaat. Als hij daar goed gaat en de printer gaat de fout in dan zit er in de printer instellingen iets niet goed.
Ik heb tevens een refunt request gedaan voor je zodat je het geld terug krijgt.
Hello I wanted to know if for the lego skeleton it was necessary to modify the size of the parts or if you had already put them to scale thank you.
The files are already blown up. So if you want to print them larger or smaller depending on the size of your printbed. You can size them up or down in your slicer program.
Ok thanks im gonna do that :)
good morning , are you able to create a file for a coffee stencil with the letters T P H in upper case and a bold font? my email is [email protected] please send me details and cost/price. thank you
Hello, I have creator question. You have numerous models for sale that use the brand name "Lego" in your tags and model name. I seem to be getting singled out and getting hit with s instantly for having "Lego" mentioned anywhere. How do you get around this or have you just been lucky?
i think just luck. Lots of designs for the lego train i had to remove lego from it. So when they ask i change it.
Sorry to hear that, those models look great. There seems to be no rhyme or reason to when they decide to slap a . Thank you for your quick response, greatly appreciated.
Tracy800
When i the files it's with it.
For now I just ed the legs and you can them by the link.
https://cults3d.emulatorsite.com/en/3d-model/gadget/leg-gaint
Thanks and another question. Each time I try the arms they fail. I have tried 4 different times. They keep coming loose. Is there away I can lay them down to print and not have them up and down?
Every slicer program is able to rotate the items you want to print so look in the slicer program if you can do that.
Also you can use a skirt in the first layer (also settings in te slicer program) this wil give more body (attachment to the print bed) for the print at the base.
Hope you can print it now without any failures.
Hello, i am not entirely sure about printing the Scania logo. The crown and tongue are same heigh, i cant chose to print only one of it if its on one model, it prints both same colour. Or did you change filament every time it traveled from tongue to crown? Thank you for answer
the crown and tongue are far enough of each other so you can first print the crown and the you can print the tongue. That way you don't hev to change the fillamet every time it's traveling.
Hope you make your print now.
Hello, I have a question regarding the Christmas Decoration Bells. I want Bells that are hollow in the middle, like the ones in your listing, but the STL files have the centers filled. May I know how I should go about doing that? do I have to edit the STL file? Thank you in advanced :)
Sorry for the late reaction, You can use vasemode in your slicer or croksrew mode. then it wil print just the outside of the Bell.
Alright, thank you so much
Hello! This is a question about your large Lego space man, I saw you made a very good copy of Lego arms and legs, is there a way to get a good digital file of other Lego bricks? What I was wanting to do was perhaps produce a large version of a Lego hulk but I can't find any smooth files, only ones that are covered in polygons, do you have any tips of how to do so?
Hello, What i did is the files with all the polygon on it. Then i went to my drawing program and draw them again by myzelf. So for smooth files you should draw them your self. It will take some time but the print result is better.
Oh that makes sense! What drawing program did you use?
Thanks for the quick answer. okay then i will go for the smaller one. greetings from
Hello! i want to know how large is the large Lego switch? is ist printable on a 210x210x210mm printer?
No the large lego switch is to large for that. There where other people asking the same so i made a version for the smaller printers.check the link.
https://cults3d.emulatorsite.com/en/3d-model/game/small-switch-crossing
This looks awesome, thank you! Just wanted to check first if it fits inside the monopoly box?
Yes it wil fit in the original monopoly box.
Hello,
I purchased the giant Lego skeleton, printed it at 77% (made sure all were scaled appropriate) and it worked, except for the arms. I'm struggeling with those.
The attachment points on the body of the skeleton are rather big for the arms. Actually the round attachment points don't even fit inside the opening in the arms. Any tips or tricks to make them fit?
Hello they will fit but to make them pop in to it you can hold the connection under warm water. this wil allow to fit them in.
Ok I will try that, thanks for the heads up. Only the body connection or also the arm itself?
On other models with tight fit I used to heat the hard-fitting parts just a little bit (but really only a little bit) with a heatgun, but didn't try it on this print yet.
I do both parts with warmwater. The heatgun i never tryed so if you try and it works please let me now.
I would like to purchase several of your designs, would you be willing to do a package price for the following designs:
double switch
small switches left and right
train track switch
large train track switch
railway barrier
railroad crossing single
Hola. Me ha encantadado tu modificacion de piso y escaleras para la casa 6020 de Playmobil. Veo que hay para descargar el archivo para impresora 3D pero yo no tengo. Tu vendes las piezas impresas???
seeking your info!
Hi, your designs are really nice. You are really excellent designer. I wish i can get your email info!, hope I'll be in with you.
https://cults3d.emulatorsite.com/en/3d-model/various/scania-logo
to this 3d print is it not missing 2 files for the yellow crown and the red tounge.
Johnny Helgarts
[email protected]
It's not missing files. It's based on changing the filament so you don't need to clue it. If you read the discription you will see that you will have to set this in the slicer program.