Am using Utimaker Cura Qidi Q1 Pro printer
- 0 j’aimes
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇩🇪 Pays du membre : Allemagne
🌐 Langue préférée du membre : Allemand. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Écrivez votre message :
7 commentaires
- Enable Custom (Expert) Mode
To access all settings:
Open Cura.
In the top-right corner of the slicer , switch from “Recommended” to “Custom.”
In the custom settings sidebar, hover over the section, then click the gear icon ⚙️ next to it.
In the popup menu, check all -related options like Structure, Pattern, Z Distance, etc., so you can customize everything.
Enable Tree
In the “” section, check “Generate .”
Set “ Structure” to “Tree.” (Default is “Normal.”)
Recommended Tree Settings for Figurines
Setting Value
Structure Tree
Overhang Angle 50°
Density 10–15%
Z Distance 0.3 mm
Enable Interface Off
Placement Touching Buildplate
X/Y Distance 0.8 mm
- 0 j’aimes
Am trying to print the Trump Goblin. Am having trouble with s. Haven't used them before as have concentrated on lithophanes. Can,you provide slicer settings?
- 1 j’aime
Sure, I can help! First off, which slicer are you using? (e.g., Cura, PrusaSlicer, Bambu Studio, etc.)
settings can vary a bit depending on the software.
- 0 j’aimes
I salute you for your bravery and talent. Your Trump figure is poetic. It gave me a laugh when I needed one.
- 1 j’aime
Thank you so much.😉
I'm really happy that I could make you laugh. Every time I look at the figure myself, I have to laugh too.🤣
I would truly appreciate a like and a follow as a form of !😉
- 0 j’aimes
Sorry, mein Kommentar. Hat sich erledigt. Hat etwas gedauert, aber jetzt ist alles gut
- 0 j’aimes
Hallo, ja kein Problem.
wird wahrscheinlich an der internet Verbindung gelegen haben. Manchmal hilft es auch wenn man den Browser Cache leer macht. Viel Spaß mit den Teelichthaltern und Danke für den Einkauf. 😊
- 0 j’aimes
Hallo, ich habe folgenden Artikel gekauft: "Spiral-Teelichthalter – Elegantes Design mit faszinierenden Lichteffekten". Ich kann den Button anklicken, doch leider iert nichts.
- 0 j’aimes
Hi Shaman4007,
Thank you for following 👍
You have a really cool desk lamp design !
Good Job, Bravo! ☺️
Best wishes from Austria
AC
- 1 j’aime
Many thanks. Love the model!
Thank you so much . I’m really glad you like my model! I’d truly appreciate a follow, and I wish you a wonderful night (or day, depending on where you are in the world). 😊
Well, I really blew it. I pulled the nozzle unit out of the heating block. Ordered another one. Question for you- do you know anyone that sells this model?
I'm very sorry for you. I'm the creator of the model, and I had no issues printing this file with the Bambulab P1S.
What exactly isn't working with the print? What happens when you try?
I don't think it's your model. My filament keeps clogging in the nozzle. So I thought if I changed nozzle that might help. I'm grounded until a new hot end comes. I've saved your instructions for the model and will live to try another day.
Which filament did you use, PLA? How did you set the hotend temperature?
Silk PLA. 220C temperature. Nozzle started jamming about 4 prints ago.