As a 3D printing enthusiast with a ion for aircraft design and a keen eye for detail, I drive to deliver exceptional aircrafts. Your satisfaction is my priority, and I am always available to answer any questions you may have.
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇩🇪 Pays du membre : Allemagne
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Hallo,
würde mich sehr freuen wenn du die Zeit hättest mal was richtig schnelles zu machen. zum Bespiel sowas.
gruß swen
Hallo Swen,
ein pylon oder Hotliner ist schon auf meiner Liste.
Ich habe aber noch ein paar andere Projekte, die vorher fertig werden müssen.
Beste Grüße
Norman
Hört sich gut an. bin gespannt was es wird! hoffe natürlich was schnelles. Das schnellste war bisher eine Me 163 mit 260 kmh in pla bei mir. Fliegt schon 2 Jahre einwandfrei. Würde gerne mit einem Pylon über 300 kommen.
gruß swen
Hello, I have a problem with the Atthis files in Bambu Studio Sclicer. No upper and lower layers are used in profile P1. No filling either. The hole for the carbon tube is not printed properly. Can someone help me how to do this?
Or can I get a .3mf file ready?
I only print with the Bambulab A1 printer.
Thank you all
Hi, the Atthis is exclusively designed for Cura. However, you can slice the Files with the provided settings in Cura and open them in Bambu Studio.
Hope this helps
Best
Norman
Hi, the only problem is that I can't specify a Bambulab printer in Cura so that the printer knows where the zero point is. Can you create your own printer at Cura? Do you know that ?
Then it wouldn't be a problem. or can I take the .stl file from your folder for Bambu Studio?
Hola
Compre tu diseño hace un año creo pero quiero descargar pero ya no encuentro el diseño del FPV HELIX. Me puedes madar el enlace para la descarga.
Hello
I am having problems printing the files with the Creality Slicer on the K2 Plus.
The bars inside are not recognised or printed.
Is there a solution?
Greetings
Hi, as stated in the description, the SU-29 V1 is designed exclusively for Simplify3D. It makes use of the Feature to change profiles at a specific Z-height which makes it incompatible with other slicers. This design was created over two years ago when S3D was the go-to slicer for 3D-printed planes.
That said, some s have managed to print V1 with other slicers, but I can't confirm whether their results met the specifications or were entirely successful. As a result, I cannot provide settings for slicers other than S3D.
However, times have changed, so I redesigned the model from scratch to be compatible with all major slicers. You can find more information about V2 on my Facebook or YouTube Channel.
Hi. No i will print the Atthis Jet
Ah sorry, the Atthis was designed for Cura. Did you follow the print settings stated in the Manual? Is surface mode active?
Hi. Ok i will look. Thanks
Good afternoon
I have a problem printing the parts for the jet.
In the description it says Infill 0%.
That can not be right?
The walls are only 0.4mm thick?
It would be nice if you could help me.
Greetings Elmar
Thanks Elmar
Hi Elmar,
That's correct! The internal structure is designed intentionally rather than relying on slicer settings.
The manual includes all the required slicer configurations.
Best
Norman
hey so ive tries building the plane with lw pla but my dumb cat broke it can i use reg pla with less infill will it work
The airframe should be printed with zero infill. The first two fuselage sections can be printed using PLA, but the remaining sections must be printed with LW-PLA to maintain the correct center of gravity (CoG). Please use the provided .factory files with print settings for Simplify3D.
sorry to keep calling but i had a look at the factory settings and there all coming up but when i open file into slice plate nothing is coming out , only the stl files will open into slicer. i have creality printer and software, any idea mate pls , thanks dan
Hi Dan, as stated in the description, the SU-29 V1 is designed exclusively for Simplify3D. It makes use of the Feature to change profiles at a specific Z-height which makes it incompatible with other slicers. This design was created over two years ago when S3D was the go-to slicer for 3D-printed planes.
That said, some s have managed to print V1 with other slicers, but I can't confirm whether their results met the specifications or were entirely successful. As a result, I cannot provide settings for slicers other than S3D.
However, times have changed, so I redesigned the model from scratch to be compatible with all major slicers. You can find more information about V2 on my Facebook or YouTube Channel.
Hi , i just started the plane print and for some reason when it s together it has filled in the ends were its ment to fit together in the fuselage it has fill in the end . not shore how to fix it. can u pls let me know to get it to stop that cause i dont know how . Love it and really would love to finish it. thanks heaps DAN
Hi Dan,
have you used the .factory files for S3D that includes the print settings?
Best
Norman
OK , will go back and have a look as this is my first plane , other wise its coming out really nice , thanks heaps for getting back so quickly. dan
would a 1kg role of lw pla be lots to do the plane
will a 12x6 work
hey do u have the stl for the propeller
Hi, the prop is bought and at this power level, I advise against printing one for safety reasons.
Any alternative Chinese engine from Aliexpress that you can recommend? I'm having trouble finding the suggested model, but I can easily import it from China. I'll wait. Thanks.
For the SU-29, I recommend using a T-Motor 2820 880KV. While it has a different screw layout, you can find an alternative motor mount available on Cults.
i got a 1400kv
Cannot print on Bambu P1S, Bambu studio does not have surface mode. How do you fix that?
Man i wish i had read the comments first, wasted 22 Euros for a worthless set of files. Please tell me we get the updated files when they are ready, not sure what your website has do with this? Why is it not clear in the description you need a certain slicer? Failing that, how do i go about getting a refund?
It's stated in the description under "Print settings", as well as in the manual, that the Atthis is exclusively designed for Cura. However, I refunded your purchase.
Please let me know when it is printable in Bambu Studio, I would happily pay again.
At the moment, it's not planned, as I'm focused on other projects and would need to make several changes that would require a complete redesign. However, another jet might be on the horizon for next year. To stay updated on new projects, feel free to check out my Facebook page for the latest news: facebook.com/3DBlackboxRC
can I drag and drop into cura and print it
The SU-29 V1 is designed exclusively for Simplify3D. It makes use of the Feature to change profiles at a specific Z-height which makes it incompatible with other slicers.
hey how much pla do u think I need and do u have a list of the electrics I need
Hello, you can find the electronics, as well as the requires amount of Filament in the description of the project.
Best
Norman
Hello,
I'm not sure if it's just me but I have ed this file multiple times and am having the same results after several s thinking I'm missing something.
LB3 is missing some of the bracing compared to RB3.
Along with
LB1 to RB1
And
LA3 to RA3
For some reason I'm getting the bracing on one but not the other when printing them side by side. My prints even have a gap where the cross bracing is supposed to be.
Everything else has printed wonderful.
I have pictures of needed!
Thank you.
Hi, parts that use vase mode can only be printed one at a time.
Best
Norman
Hello friend ed the STL file of the SU29 RC PLANE. Before I will start the printing I need to know. does the stl files settings are applicable if I use Bambu lab X1C carbon printer? do i need need to change the settings of the stl files or I can go ahead and print the stl files without editing on it?
I hope to hear your reply in my email at [email protected]. Thank you
Hi, the print profiles are only available in the .factory files. This plane was specifically designed for Simplify3D and uses features that aren’t available in other slicers, so I can’t provide settings for Bambu Studio. However, I’ve designed a Version 2 that’s compatible with all slicers, but I’m waiting for my website to be completed before releasing it.
Hello, Do you have version 2 of Su-29 for Cura, BambuStudio, and PrusaSlicer yet? if so where can I find the files? if not, when. do you think it will be ready? Thanks!!
Hi, the files are ready, but I'm still waiting for my website to be finished. Hopefully it's ready in the next months. Sorry for the waiting and thanks for your understanding. Best Norman
Norman, Thanks for the update! Hope your site gets up soon, I'm dying to print this!
Norman, one more question! what is the URL going to be of the new site?
Thanks for your patience! I hope so, too 😄
I'll let you know the URL, when testing is done. If you would like to receive the good news first, you can follow me in social media. I'll post an update and the URL there first 😉
Absolutely!! If you would like a test print of a part I am a PursaSlicer/Ender 3 V3 Ke .
Sorry for the misunderstanding. The plane is ready and well tested, but the website needs to be finished and tested, and after that I'm going to post the URL. However I'm always looking for testers, and you can participate in projects if you like 😊
Also if you are willing I have Blueprints I designed of a concept aircraft and I'm willing to pay up to 30$ if you can do the job for me? me at [email protected], If you're interested.
Thank you so much for your offer and for considering me for your project. I appreciate it, but I’m currently quite busy with work and other planes, so I won’t be able to take on any additional projects.
Hey! With your Su-29, Do you just use PLA for everything not specified? ALSO What Motor did you choose? Thanks. Last thing, Do we use Infill, also If not then how do we pring it to where no s are necessary?
Hello, the SU-29 is primarily printed using LW-PLA. For the motor, I'm using a Permax BL-O 3520-0920. If this motor is unavailable in your region, you can find an alternative motor mount with a different screw layout on Cults3D. This is also compatible with a T-Motor AS2820, which will also work with the SU-29 V2, currently in development.
The entire plane is designed to be printed without s, and the airframe does not require any infill. Please use the provided Simplify3D (S3D) factory files for the print settings, as they leverage specific features not compatible with other slicers. However, V2 will be compatible with all major slicers, including S3D, Cura, BambuStudio, and PrusaSlicer.
I can't put my components together. Infill at 3%. The infill is printed right up to the edge and is therefore a problem when putting them together. I then have to cut it out, which is a lot of work. What am I doing wrong?
I'm unsere which plane you are referring to, but None of my Planes are meant to be printed with infill. Which model are you referring to?
Muss man mit Stützstruktur drucken ?
Nein, alle Teile sind frei zu drucken.
Hi is there any way I can get your email so I can privately message you.
Hi, you can send me a message at [email protected]
Hello, when do you release the Su-29 V2.1 Version? Thanks
Hi, unfortunately I can't provide an estimated release date, because the website development is ongoing and out of my hands. Sorry for the delay.
Thank you for your informations. How much will the files cost?
The early bird discount will be 36.99€
Hello,
I really like your models, great work!
I'm very interested in the ATTHIS. Do you think you might offer an FPV version in the future?
I also had a quick question: why are some models available on your website and others on Cults3D, but not the same ones? Wouldn’t it be easier to have everything centralized in one place?
Thanks in advance for your reply, and once again, amazing job on all your creations!
Hi,
thank you so much for the ! I'm currently working on a new FPV model—similar in concept to the Atthis, but specifically optimized for the needs of FPV pilots.
If you're interested, feel free to check out my Facebook page: https://www.facebook.com/3DBlackboxRC/
Over time, my designs and development process have evolved significantly. From now on, only models that meet my new standards will be released on my website. This includes full compatibility with all major slicers, along with tailored project files and print settings to make the printing process as straightforward as possible. While I won’t be publishing any new designs on Cults, I’ve kept free models like the SU-29 available there so they remain accessible to everyone.
The Atthis is still a great model, but since it's only compatible with Cura, it will remain available on Cults.
Thanks again for the kind words and good luck for your build!
Awesome, thanks for your replies! I can’t wait to see the FPV version of the ATTHIS, do you have a release date in mind?
The maiden is planned for next week. After that I'll kick off the beta phase. Hopefully it's ready in the next two month ;)
I'm glad to hear that, don't hesitate if you need a beta tester :)