Boîte de séchage de filaments imprimée en 3D avec un seau à riz de 5,8 litres - Ah Wen Jun's Drying Box - v5.0

3D Model Design Description for Drying Box Version 5.0

This design is adapted from the original drying box model created by the Bilibili content creator, "Ah Wen Jun." The project has now reached its Version 5.0, which includes significant improvements. Version 4.0 used a 4L rice bucket, which allowed for a full batch of material to be dried at once. The link for Version 4.0 is: 4L Rice Bucket Drying Box Stand - Ah Wen Jun's Drying Box - V4.0. Version 5.0 features a larger 5.8L rice bucket, offering more space for drying materials.

Materials List for 5.8L Rice Bucket:

No.	Name / Link	Price (RMB)	Notes
1	5.8L Rice Bucket	13	Purchased from Pinduoduo, 26 RMB for 2 buckets, average cost 13 RMB each.
2	608ZZ Bearings	0.2	Also available on Pinduoduo; it’s recommended to buy extra as they are needed in multiple parts.
3	Color-changing Silicone Gel (500g, Orange)	10	Blue color is toxic, use orange beads instead which are reusable.
4	Shipping Fee	4.6	Combined shipping cost for the above items from the same store.
Total		27.8	Additional purchases may reduce the cost further.

Original Author’s Comments:

---

Version 5.0 Update:

Thanks to @SanEr Workshop for sharing the 5.8L rice bucket stand. You can the author on Xiaohongshu (Little Red Book). For more details about the Version 5.0 drying box update, watch the video here:

Video Link on Bilibili

Version 5.0 represents a complete overhaul compared to earlier versions. The major update is the Drying Box itself, which now utilizes a 5.8L Rice Bucket. The previous version used a 4L rice bucket, but the 5.8L bucket provides more space for drying materials and is significantly cheaper, with a price of just 13 RMB per bucket, offering great value. It can larger and wider drying trays, eliminating the issue of material clogging. Additionally, small 3D printers can now print the model without requiring file modifications.

Recommended Print Settings:
- Layer height: 0.2 mm
- Print speed: 50 mm/s
- Print temperature: 200°C
- Heated bed temperature: 60°C
- Infill: 40%

Note: The base components require printing two copies.
- The right stand component requires , as marked in the file name.
- The central rod requires , as marked in the file name.
- All other parts do not need .

The entire set of parts requires approximately 170g of filament and takes around 16 hours to print.

If this is helpful, please like, save, and comment on my video. Thanks so much!

---

Version 4.0 Update:

Special thanks to @XinShiDaiDan-AnyCubic_Chiron for the brilliant design. This version is completely different from the previous versions, almost like an entirely new design.

For more details, watch the video here:

Video Link on Bilibili

Print Settings for Version 4.0:
- For the stand and lid:

- Layer height: 0.2 mm

- Print speed: 50 mm/s

- Print temperature: 200°C

- Heated bed temperature: 60°C

- Infill: 40%
- For the flexible central rod:

- Layer height: 0.2 mm

- Print speed: 50 mm/s

- Print temperature: 200°C

- Heated bed temperature: 60°C

- Infill: 100%

This version uses less material but is much sturdier. The central rod is also compatible with earlier versions, and the drying beads are easy to observe. Additionally, the lid design now s models for both round and square hygrometers, with added threads.

---

Version 3.0 Update:

The previous central rod design, while clever, had issues with heavier trays causing breakage or material clogging. A group member, "XiaoDaoKeHardDisk," developed a new, extremely sturdy central rod, making the box much more durable. Version 3.0 only requires reprinting the central rod to fix any issues.

For more details, watch the video here:

Video Link on Bilibili

---

Version 2.0 Update:

There were issues with material clogging, and group member "XiaoKongBai" modified the stand design. You will need to reprint the stand and the stand rods to eliminate clogging problems.

For more details, watch the video here:

Video Link on Bilibili

---

Original Content:

Hello! This is Ah Wen Jun's drying box design. Using this drying box effectively reduces the moisture of materials and prevents stringing issues during 3D printing. It is highly recommended for people living in high-humidity regions.

For more information on the design and for 3D printing discussions, feel free to my QQ group: 659673101.

The drying box is based on open-source designs available on Thingiverse.

Original design link: Thingiverse Link

---

This drying box design is a significant improvement over traditional models that used two rows of rollers at the bottom, which had limited effectiveness and often caused material jams. The current design is more efficient and perfectly suited for 3D printing.

The 4L rice buckets purchased in China were not compatible with the original parts, so modifications to the design were necessary. I, as a non-modeling expert, spent considerable effort to revise the design, even wasting a lot of material in the process. Additionally, I found the lid design and released it for free, so now we can make non-destructive modifications.

If you found this article helpful, please like, save, and share it. I truly appreciate your !

---

This drying box is compatible with printers like Ender3, Bumblebee, and Cr-6 SE. For printers like Rose Go and Ender2-Pro that can't print the base, check out this video for solutions:

Video Link on Bilibili

搬运自B站UP主阿文菌的干燥箱，目前已经出到了5.0版本，其中4.0版本是4L米桶，可以一锅出，链接是：4L米桶干燥箱支架-阿文菌的干燥箱-v4.0，5.0版本是5.8L米桶，空间更大。

5.8L米桶物料清单：

序号	名称/链接	价格（人民币）	备注
1	5.8L米桶	13	在拼多多购买，26元2个，平均每个13元。
2	608ZZ轴承	0.2	也可以去拼多多购买，建议多买几个，因为很多地方都需要。
3	变色硅胶500g（橙色）	10	蓝色有毒，换橙色珠，可循环利用。
4	快递费	4.6	上述两个商品来自同一家店铺，快递费合并计算。
总价		27.8	如果多买几个，可能会便宜一些。

原作者留言信息：

---

v5.0 更新：

感谢 @三儿车间 对5.8L米桶支架的分享，大家可以在小红书联系到作者。

这次5.0版本的干燥箱的更新，可以看视频了解：

视频链接

5.0版本与之前的版本完全不同。

主要是【干燥盒】发生了变化，这次使用的是【5.8L的米桶】，之前用的是【4L的米桶】。

5.8L的米桶空间更大，价格更便宜，一个只要13元，非常具有性价比。

支持更大更宽的料盘，再也不用担心卡料了。

而且小尺寸的打印机，也可以打印了，也无需切割文件打印。

推荐打印参数：
- 层高：0.2mm
- 打印速度：50mm/s
- 打印温度：200°C
- 热床温度：60°C
- 填充率：40%

注：底座组件需要打印两个。
- 支架-右侧组件需要支撑，已在文件名中标注。
- 中轴杆子需要支撑，已在文件名中标注。
- 其它零件不需要支撑。

全套零件耗材约170g，打印时间大约16小时。

如果对您有帮助，欢迎为我的视频点赞、收藏、评论，感谢感谢。

---

v4.0 更新：

感谢群友 @新时代蛋-AnyCubic_Chiron（54706407）的制作，设计非常巧妙，具体看视频：

视频链接

此版本与之前的版本完全不同，两者已经不能算得上是同一种物种了。

打印参数：
- 支架、盖子：

- 层高：0.2mm

- 打印速度：50mm/s

- 打印温度：200°C

- 热床温度：60°C

- 填充率：40%
- 柔性中轴：

- 层高：0.2mm

- 打印速度：50mm/s

- 打印温度：200°C

- 热床温度：60°C

- 填充率：100%

这个版本使用的材料更少，而且更加结实。中轴也兼容之前的版本，干燥珠也更方便观察，非常不错！

另外，盖子增加了螺纹、圆形和方形湿度计的模型。

---

v3.0 更新：

旧版的中轴组件设计虽然巧妙，但如果料盘过重，可能会崩坏并卡住。群友指出可以使用PETG材质打印，避免卡住问题。

不过“万能的群友——‘小刀刻硬盘’”又研发了一个新版的中轴，异常结实、牢固，让打印盒更加耐用。

3.0版本只需要重新打印中轴即可解决问题。

具体看视频：

视频链接

---

v2.0 更新：

有可能出现了卡料情况，群友“小空白”修改了支架设计。

需要重新打印支架和支架固定杆这两个零件，能够完美杜绝卡料问题。

具体看视频：

视频链接

---

原内容：

嘿！这里是阿文菌的干燥箱图纸。

使用干燥箱，可以有效减少材料受潮，避免打印出现拉丝情况，强烈推荐湿度较高地区的人群使用。

视频链接：

视频链接

为了更好的交流3D打印相关图纸，可以加我的QQ群：659673101

为了更好的交流3D打印相关图纸，可以加我的QQ群：659673101

为了更好的交流3D打印相关图纸，可以加我的QQ群：659673101

---

这款防潮箱，是T站上的开源图纸。

原版链接：Thingiverse链接

这个零件设计非常不错，并非传统意义上的在下面弄两排滚轮，这种设计效果不好，容易卡料。

所以才有了现在这个设计，效果非常好！

但是我们购买的国内4L米桶都无法兼容这些零件，因此需要修改图纸！

我是一个不会建模的人，花了不少精力修改了这份图纸，真的非常不容易，甚至打印了很多废件，浪费了不少材料。

另外，我还找到了盖子的图纸，一并发布出来，现在我们可以无损改造了。

如果您觉得我的文章有帮助，欢迎点赞、收藏、转发！感激不尽。

我的B站空间链接

---

Ender3、大黄蜂、Cr-6 SE 都可以打印。

Rose Go、Ender2-Pro 的底座打印不了的，可以参考这个视频解决：

视频链接