BOÎTE À RESSORT À IMPRIMER SUR PLACE

Thanks very much for this! Great model for me! Printed perfectly the 1st time I tried on my Anycubic Kobra 3. Also printed the test piece and it too worked perfectly. I'm very intrigued on how you model in hinges and gears so that they come off the table functioning. Thanks again.

tried multipe times in PLA with Zero success. Of course with , but structures were not strong enough for that height. Even turned the part around to have only on the lid, also no success. Part fails in summary

Pretty good.

Anyone tried printing it, say, 200% scaled?

Conseguí imprimir a la primera (aun cometiendo varios errores) con una Elegoo Neptune 4 Max con los parámetros "Fino (velocidad más lenta)", "Soporte" y "Borde (agrega una zona plana de una sola capa alrededor del modelo)" en la base para la adherencia. El material utilizado fue PLA. La posición de la caja a la hora de imprimir fue con las ruedas de engranaje colocadas en la base.
La caja abre y cierra funcionando normalmente pero dejo aquí el listado de problemas que detecté.

1- Al utilizar soporte para evitar los voladizos, me costó mucho trabajo quitar el soporte y en la zona de los engranajes es complicado limpiar (siempre queda algo sin poder quitar que hace que no giren suavemente). Pero con esfuerzo y paciencia lo conseguí.
2- Al poner el borde en la base crea como una capa fina que no se puede quitar. Tuve que lijar la base para poder acceder a las ruedas dentadas. Una vez lijado (con mucha paciencia) me encontré que entre los dientes de los engranajes también había soporte. Pero quitados con paciencia conseguí que la caja abra y cierre como se ve en el video.

Conclusiones: Si lo vuelvo a intentar, volveré a poner la velocidad más lenta "Fino" sin "Soporte" (la Elegoo Neptune 4 Max trae ventiladores a lo largo de todo el mástil que va enfriando las capas según salen con lo que permitirá un mejor voladizo sin utilizar "Soporte" y configuraré la adherencia de la placa de impresión con la opción "Falda" (que solo añade una línea impresa alrededor del modelo pero que no está conectada al modelo). Así me aseguro que cuando quite el modelo podré acceder directamente a los engranajes sin tener que lijar.
Si vuelvo a imprimir el modelo con estas características, volveré aquí para comentar el resultado.

Revisión 2 del comentario:
He vuelto a imprimir la pieza pero esta vez en "Fino". No tiene "Soporte". La adherencia de la placa de impresión con la opción "Falda" (un solo borde alrededor sin tocar la pieza) y ha quedado perfecta. Tal cual la he quitado de la placa podía abrir y cerrar sin problemas y sin tener que hacer nada extra. Una cosa importante que he realizado antes de imprimir es volver a calibrar la máquina tanto la cama como la distancia de la boquilla (siguiendo los pasos que indica el vídeo de ensamblado que viene con la máquina).

noice

thank you

Printed no problems first time around. Clever solution to the overhang - thought it was all going to go wrong.... but it didn't! Printed in PLA, no raft or s, 15% infil, 0.18mm layer height. Needed a wee bit of manipulation and a couple of drops of oil to work perfectly. Opened loads of times - no broken bits yet. Thanks!

3 years later and I STILL haven't got it to print properly hahaha. Hopefully I'll have the time to try again soon. Great design!

Nice! Loved the sunshine gear and how you solved the overhang (and the cool video, of course). I'll might check your Instructables and make one suited for TCG cards.

Hi, I have a problem,the big gear and the outer frame of my printed file are integrated, how to set it? The slicing software I'm using is Cura 4.4, and everything works fine with the test piece.

Works great but the spring breaks after a few uses. Printed with Creality PLA

Poorly designed bridging on the area that connects between the center of the 2 gears. It prints curved lines in space that aren't resting on anything, which isn't possible to do. It's a shame because the rest of the design is really nice.

Amazing files! I've just printed one in clear PLA and it's so nice.

Thanks for your content!

how much infill should i use??

Cool, but could you make the files different for the lid so they could be popped together? It's sort of like legos.

i just got my " ender 2 pro " 2 days ago and this " pip spring loaded box " will be my 3rd print ever

Really great design, thanks a lot ! I printed it for a timelapse for my youtube video, if you want to go see : https://www.youtube.com/watch?v=A0rb5aVEk7o&t=12s

I printed this on my Anycubic Vyper. Thanks, great file.

Tengan cuidado de subir sus diseños a CULTS, sin previo aviso les bloquea la cuenta, les roba sus STL y no dan respuestas. Lo peor de lo peor. 100% estafadores. Mi es 3drovettas

Be careful ing your designs to CULTS, without prior notice it locks your , steals your STLs and does not give answers. The worst of the worse. 100% scammers. My is 3drovettas

Tried it several times now (extruder calibrated, bed level, temps set for filament, tried different print settings). The result is now nearly perfect but I always fail to get it 100% perfect. The box is not springing open. It gets stuck after moving 2 or 3 mm. When closing I can feel a hard resistance on this spot but I am unable to make out where it gets stuck... I think it happens on the gear.

Printed on a Flashforce Adventurer 3, default settings, test and actual model printed and performed 100%, awesome job

GEEKDAD_3D, same problem here, I will sand too.

If you scale it down by 50% you also halve the tolerances so it would almost be like printing a solid object.

Can this be scaled down? I went down to 50% and it’s not turning.

Very nice!! Printed perfectly first try using PLA and 0.10 resolution on my PRUSA MK3 printer. No sag on the side using all the default configs with Prusa Slicer. Like how you used a double bevel gear set to contain the ring gear.

Thank you!
It works with PETG, but need some cleaning with a knife at bridges

My Voxel is having some issues with the test; the fourth layer is running now, yet it seems a little "iffy". It'd be nice to see some bigger gaps...

Sunshine, I tried teh test print you include with this box and the sunshine gear seems to be fused to the outer frame. I'm using Cura to slice with a layer hight of .15 and a wall thinkness of 1.2 mm wall line count of 3. Am I doing something wrong? The hings for the handle part on the test that moves the smaller gear works perfectly, it's just the larger "sunshine" gear that is getting fused to the frame. You can reach out to me on twitter @cjoptimus or my email [email protected].

Sunshine
The box is awesome, printed a few out playing with temp. and all came out great, thanks for the stl. Printed in PLA from various vendors temps from 200-225.bed 50. has anyone tried wood PLA filament ? since it has sanding and staining capabilities i bet it would come out great if it holds up. the sag on the top i think is acceptable considering the print and all the contours that hold up nicely
.dropped you a donation today also.

[email protected]