Maison de la licorne magique

Why pay for this single file when you have over one thousand more for a lot less? That’s right. STLFLIX is a multi-theme ever-growing library of STL files. Your One-Stop-Shop for 3D-Printing models. Get started with the Ultimate STL platform!

Click here to STLFLIX

Unfortunately it doesn’t fit your pet unicorn.

This STL file is recommended for FDM Printers!

3D Printing Time Based on Ender 3: “Main House” files - 06 Days, 22 Hours, 45 Minutes (will vary accord to you printer model)
“Magic Unicorn Pet House” files - 22 Hours, 12 Minutes (will vary accord to you printer model)

Attention in this Assembly:To avoid wasting material in this model, you should print almost the entire "Main House", but first subtract 4x of the 12x “ts” from the "Main House" folder, then add and print the subtracted pieces that are in the “Magic Unicorn Pet House” folder, so you will have a complete house and will not waste extra pieces.

Approximate Measurements: 40 x 40 x 40 cm

ATTENTION! For this stl, you will need super glue to some pieces.

NOTE: We do not recommend the use of SILK filaments for this piece. The piece contains fittings and ts, and the Silk filament does not have the necessary physical properties to ensure the required strength for the piece. The use of Silk-type filament is at your discretion.
COPYRIGHT & SELLING RIGHTS

This STL file is copyrighted by STLFLIX©, the Ultimate STL Subscription. This means you can print it for yourself, but you DO NOT have the right to sell it.

To acquire copyright & selling rights, you must subscribe to our Commercial License. By doing so, you will also get immediate access to over 500 STL files, unlimited s, and marketing content for every single file.

Go commercial and skyrocket your own store with STLFLIX!

GO COMMERCIAL!

USEFUL LINKS

Get to know us a little better!

Website | Instagram | TikTok | Twitter

What are you waiting for? thousands of other makers from all around the world.

HAPPY PRINTING!

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height:  0.2 mm
Recommended Layer Height:  0.2 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs : No.
Build Plate Adhesion: None.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!