Aller au contenu

Pocket Dungeon (Jeu de société en solo)

PD_Starter_GIF.gif Pocket Dungeon (Jeu de société en solo)
PD_Starter_01.jpg Pocket Dungeon (Jeu de société en solo)
PD_Starter_02.jpg Pocket Dungeon (Jeu de société en solo)
PD_Starter_03.jpg Pocket Dungeon (Jeu de société en solo)
PD_Starter_04.jpg Pocket Dungeon (Jeu de société en solo)
Publicité
Partager
Ajouter à
Make
Publicité
?
Qualité de la création : 5/5 (3 votes)
Évaluation des membres sur l’imprimabilité, l’utilité, les détails, etc.
Licence
Usages
Format du design 3D
5 fichiers (PDF, TXT et ZIP) Fermer
  • BOOKLET_Pocket Dungeon Rush - Rule Book_Edition01.pdf
  • License.txt
  • Pocket Dungeon Rush - Rule Book_Edition01.pdf
  • PocketDungeon.zip
    • PocketDungeon_Monster_Peg.stl
    • PocketDungeon_Weapon_Sword.stl
    • PocketDungeon_Dice_01.stl
    • PocketDungeon_Monster_EvilBlob.stl
    • PocketDungeon_Items.stl
    • PocketDungeon_Hero_OniSlayer.stl
    • PocketDungeon_Hero_Peg.stl
    • PocketDungeon_Box/PocketDungeon_Box_Sliders.stl
    • PocketDungeon_Box/PocketDungeon_Board.stl
    • PocketDungeon_Box/PocketDungeon_Box_Clasp.stl
    • PocketDungeon_Box/PocketDungeon_Box_01.stl
    • PocketDungeon_Box/PocketDungeon_Box_02.stl
    • WallsGates_v1/PocketDungeon_Walls_v1.stl
    • WallsGates_v1/PocketDungeon_Gates_v1.stl
    • WallsGates_v2/PocketDungeon_Walls_v2.stl
    • WallsGates_v2/PocketDungeon_Gates_v2.stl
  • SoloPlay_Kit.zip
    • PocketDungeon_Bestiary_KingBlob_Tag.stl
    • PocketDungeon_Heroes_OniSlayer_Tag.stl
    • PocketDungeon_Bestiary_KingBlob.stl
    • PocketDungeon_Dice_02.stl
    • PocketDungeon_Dice_03.stl
    • Pocket Dungeon Abyss - Rule Book Edition 01.pdf
    • PocketDungeon_Bestiary_Blob_Tag.stl
    • PocketDungeon_TornMap.stl
    • PocketDungeon_Tracker_Slider.stl
    • PocketDungeon_Tracker_Base.stl

En savoir plus sur les formats
Dernière mise à jour 2024-04-28 à 18h41
Date de publication 2022-12-06 à 10h02
Numéro du design 950368
pixelcadet

pixelcadet

Compte certifié
  • er
Vous rencontrez un souci avec ce design ? Signaler un problème.

8 commentaires

Ajouter un commentaire

8 commentaires

dgoutram
dgoutram

can this be printed on a resin printer
PieterJanSterk
PieterJanSterk

Hi, was looking at the solo manual, and noticed that it mentions a lot of extra item, some scrolls, a rabbits foot, .. However, I can't seem those files within the folders. Am I looking in the wrong folder?

pixelcadet
pixelcadet

Hi there, thank you for purchasing Pocket Dungeon. The other items will be part of the expansions, sorry for the confusion

PieterJanSterk
PieterJanSterk

No worries, I'm glad you're working on expansions, love the concept of your idea. Any idea on an ETA?

pixelcadet
pixelcadet

Hi, sorry for the late reply, I am currently focusing on the dice weapons, will come back to Pocket Dungeon stuff in Jan next year.
Wza777
Wza777

I'm just starting my print and I purchased the expansions also. Just to clarify, should I be printing the walls four times each? And how many gates?

pixelcadet
pixelcadet

Hi there, yes you can print the walls four times each, and you can print the gates just once as they are used for all terrains/expansions
INDIE-3D
INDIE-3D

Hello, how can I do so that the details come out well? I printed with a layer height of .2 and a speed of 50 mm/s

pixelcadet
pixelcadet

Hi there, I am also using the same setting with my ender 3. Esp. the monster and hero pieces are in low poly so it should retain the shape even though printed using fdm. Other thing I can think of is to calibrate the printer to ensure constant extrusion and prevent stringing. Could you pls tell me how does it look with your result?

pixelcadet
pixelcadet

Also, I‘m using 0.4mm nozzle

INDIE-3D
INDIE-3D

The details of the box, numbers and letters, nozzle is the same .4

pixelcadet
pixelcadet

I see, you can try to dial down your initial print speed to 10 and initial travel speed to 40, it should help I think.

INDIE-3D
INDIE-3D

ok I'll try, thanks

  • 1 j’aime
jenlugo
jenlugo

why does this not come with the torn map pieces?

pixelcadet
pixelcadet

hi I added back the torn map piece stl in the solo play kit folder, apologies for the confusion, and thanks for checking, let me know if you have further questions.

jenlugo
jenlugo

Ok thanks. so the hinges that connect the two halves of the board keep snapping off and I was wondering if you could help

pixelcadet
pixelcadet

Hi there, in which direction did the hinge snap off to? The hinges are specificallly reinforced in the earlier updates to prevent it from snapping, so it should be quite strong, if printed in the default orientation and with at least 20% infill.

jenlugo
jenlugo

I printed everything how it was when I ed the file and even put it at 30% infill however It snapped from the inside.

pixelcadet
pixelcadet

Hi there sorry for that, let me create another ver with much thicker hinges. You will get file updates when theyre ready. 🙏🏽

  • 1 j’aime
Nosada
Nosada

Could you create a tutorial for how to assemble the box? I assume you've updated the box since making the videos because it looks different. I don't understand how to put together the hinges.

pixelcadet
pixelcadet

Hi there, good point! I will try to record one and hopefully it will be up by next week.
Locix
Locix

Hi, nice job, unfortunately even with all my attention to the settings the sliders were bond to the body. May I ask for a version with a bigger tolerance please? For example the tolerance of my printer is usually about 0,25 and 0,35mm. Thank you.

pixelcadet
pixelcadet

Hi there,

Thanks for your about the slider tolerance for pocket dungeon, I’m still out of town for xmas, and will be working on it as soon I’m back home and have access to my 3d printer again next week.

  • 1 j’aime
Locix
Locix

Thanks ^^

pixelcadet
pixelcadet

Hi there, I added box v2, with bigger tolerance and chamfered edges. Idk if you've tried this, what helps for me was to reduce the initial layer flow. Let me know you think, and hope it helps. :)

  • 1 j’aime
Locix
Locix

Hi,

I tried two more times with the v2 box, unfortunately the sliders were not sliding, I unlocked them with a bit of cut and sand but they still weren't smooth. I would suggest to switch to some other slots where to place tokens like the inventory or the dungeon plate.

pixelcadet
pixelcadet

Hi there, thanks for the suggestion. I updated v2 with holes instead of slider. You can use the Potion and Water flask item pieces as HP and SPD tracker. :)

  • 1 j’aime
_BOBE
_BOBE

Are we able to see the rule book? Looks fun! Also, you think I could make this with a resin printer?

pixelcadet
pixelcadet

Hi there, thank you! Below you can find the rule book for 2-player gameplay, another rule book for solo play also coming very soon. I don't have much exp with resin printer, but theoretically you could, so long you move around the 2 sliders at the bottom of the box before curing, the miniature should also have better details I think.

Rule book: https://drive.google.com/file/d/1u0EgGokB1M6E_AvTgTmPlqw4C6mmPYIF/view?usp=sharing

  • 1 j’aime
_BOBE
_BOBE

Sounds fun! Any videos of it coming out? Personally would like to see gameplay before I potentially get a head ache over printing errors haha.

_BOBE
_BOBE

Also how does the hinge work for closing/opening it. I feel like resin would just snap

pixelcadet
pixelcadet

Ah true, the hinge could be problematic, as it's basically just a thin 0.8mm rectangle, so it needs to be bendable somehow, I'm not sure if thin resin layer could also be bendable, even after curing. Gameplay video would be great idea, I will do it, as soon I'm done with creating and testing all the other characters and monsters. Thanks!

  • 1 j’aime
_BOBE
_BOBE

Yeah resin I don't think resin will be bendable. (depending on the resin) But worse case scenario I just make it a lid that pops off instead of a book type thing. Do you have a youtube channel I can sub to while I wait for that video?

pixelcadet
pixelcadet

Yeah good to know thanks, here's my youtube channel :) https://www.youtube.com/@pxlcdt

pixelcadet
pixelcadet

Hi there, I just ed Pocket Dungeon 2 player gameplay video, hope it helps! :) https://youtu.be/rPlN-TM6OF0

  • 1 j’aime

Page traduite par traduction automatique. Voir la version originale.

Vous souhaitez soutenir Cults ?

Vous aimez Cults et vous avez envie de nous aider à continuer l’aventure en toute indépendance ? Sachez que nous sommes une petite équipe de 4 personnes et qu’il est donc très simple de nous soutenir pour maintenir l’activité et créer les futurs développements. Voici 3 solutions accessibles à tous :

  • PUBLICITÉ : Désactivez votre bloqueur de publicité.
  • DON : Faire un don via Ko-Fi 💜.
  • BOUCHE À OREILLE : Invitez vos amis à venir découvrir le site et les magnifiques fichiers 3D partagés par la communauté !

Partager et télécharger sur Cults3D c’est garantir que les designs restent bien entre les mains de la communauté des makers ! Et non celles des géants de l’impression 3D ou du software qui possèdent les plateformes concurrentes et qui exploitent les designs pour leurs propres intérêts commerciaux.

Cults3D est un site indépendant et autofinancé qui n’a de compte à rendre à aucun investisseur ou aucune marque. La quasi totalité des revenus du site sont reversés aux makers de la plateforme. Les contenus publiés sur le site servent uniquement les intérêts de leurs auteurs et pas ceux des marques d’imprimantes 3D qui souhaitent aussi contrôler le marché de la modélisation 3D.