Aller au contenu

Station d'accueil Nintendo Switch Crystal Dock - Version classique et OLED
98AE11F2-8AE1-4BAF-9F18-A9A132691C58.jpeg Station d'accueil Nintendo Switch Crystal Dock - Version classique et OLED
8E0AA781-356F-4C2C-9252-40211F8B89BD.jpeg Station d'accueil Nintendo Switch Crystal Dock - Version classique et OLED
DBFAA05C-878A-4BA8-A6B9-84AF2FF674A4.jpeg Station d'accueil Nintendo Switch Crystal Dock - Version classique et OLED
991F4BDE-4E51-4971-A5DB-78DB1BD54AD3.jpeg Station d'accueil Nintendo Switch Crystal Dock - Version classique et OLED
DBE57603-16D1-44E7-B4F5-004687643002.jpeg Station d'accueil Nintendo Switch Crystal Dock - Version classique et OLED
9270EF46-049B-4E21-BE80-B2FC319A8E2E.jpeg Station d'accueil Nintendo Switch Crystal Dock - Version classique et OLED
2370C75C-8A60-44D7-A4D2-7965B7111AA9.jpeg Station d'accueil Nintendo Switch Crystal Dock - Version classique et OLED
377F97CD-ECBB-4AA0-8CE6-B368946EC5AB.jpeg Station d'accueil Nintendo Switch Crystal Dock - Version classique et OLED
A312D6AC-62A7-4748-BF3E-342C26DB3C8A.jpeg Station d'accueil Nintendo Switch Crystal Dock - Version classique et OLED
Publicité
Partager
Ajouter à
Make
Publicité
?
Qualité de la création : 4,8/5 (24 votes)
Évaluation des membres sur l’imprimabilité, l’utilité, les détails, etc.
Licence
Format du design 3D
1 fichier (ZIP) Fermer
  • Nintendo_Switch_Crystal_Dock_Holoprops.zip
    • PART_A_Switch_CLASSIC_Crystals_Holoprops.stl
    • PART_A_Switch_OLED_Crystals_Holoprops.stl
    • PART_B_For_Both_Switch_Crystals_Holoprops.stl

En savoir plus sur les formats
Dernière mise à jour 2022-12-31 à 6h42
Date de publication 2022-12-07 à 18h43
Numéro du design 952642
Holoprops

Holoprops

Compte certifié
  • er
Vous rencontrez un souci avec ce design ? Signaler un problème.

27 commentaires

Ajouter un commentaire

27 commentaires

absdaytonbrenna
absdaytonbrenna

ok so this is literally the 3rd thing I am helping my kiddo print, so forgive what is likely a newbie question. We printed the classic left side of the hoder great, I am printing the middle portion now using s and a raft since we have a flashforge 5M and the plate was not big enough for it to lay flat. Where is the file for printing the right side of the dock? I see 3 files in the zip and if I just print another one of the classic for the left side it will not hook into the middle portion. Sorry again, I know I probably phrased this in the worst way possible!
ps4mustafa
ps4mustafa

How much does it weigh? And how long does printing take?

Holoprops
Holoprops

Hi there,
That’s not an easy answer. It depends entirely on your printing settings.
evsvec
evsvec

Hi, do you have a wall mount version?
scubiefan
scubiefan

Printed perfectly

  • 1 j’aime
thhotung
thhotung

Does 175x175 build plate enough to build this?

Holoprops
Holoprops

I think that should be okay
3DKAOZ
3DKAOZ

The design is nice but unfortunately it does not fit, it must be repaired and the part that fits should be made smaller - 0.2mm per side, I hope you solve it soon
Vasault
Vasault

wanna print this on a transparent petg, do you recommend infill?

Holoprops
Holoprops

Hi,
You should use a Lightning infill.
msaeger
msaeger

How big does the build plate need to be for this? I have 200x200.

  • 1 j’aime
Holoprops
Holoprops

You are good to go!

  • 1 j’aime
RLDESIGNSAU
RLDESIGNSAU

sadly files need to be repaired with 3d builder. but they work. thanks

Holoprops
Holoprops

Hi,
You can ignore the repair message, it is not necessary to be sliced.
TGBcustom
TGBcustom

Hey, on the oLED there is a little black rice blocking it from sitting down all the way. I have photos if u need
balmart3d
balmart3d

Felicitaciones por el diseño, quedo increible!!!! 👏👏👏👏👏👏👏🏆🥇

Holoprops
Holoprops

Than you very much, truly appreciated.
luisbcalil
luisbcalil

Hi there! Loved the print, came out just fine! But I noticed that Part B has a flat surface that sits just below the right Joycon, not allowing the Switch to be even when on the dock (I checked other s pictures to be sure that was not a problem I was facing alone). I noticed you ed a fix for this on Dec 2022, but I ed it last week, and the problem remains. Can you land a hand on this issue? Thanks!

Holoprops
Holoprops

Hi,
Thanks for reaching out, and you are correct. The first release faced this issue. Since then, I corrected that and the latest update from Dec 31, 2022 is the one to grab. Please, re the file and you should be okay.

luisbcalil
luisbcalil

Hi, thanks for replying! I reed today, and the problem seems to persist.

Holoprops
Holoprops

Can you let me know what type of Switch you have? OLED or Classic?

luisbcalil
luisbcalil

The OLED! I printed Part A for OLED, fits perfectly, but B is making it sit a bit high

Holoprops
Holoprops

Thanks a lot! 🙏I will take a look at the model.

luisbcalil
luisbcalil

Thank you so much!

luisbcalil
luisbcalil

Hi again! Just to let you know, I managed to test the print on a Classic Switch, and it fits! The issue only happens with the OLED at the moment.
daveabel
daveabel

Do you think this could be adapted to print in resin?

Holoprops
Holoprops

Yes of course.
debbieb32
debbieb32

Love this! It came out perfect. I have some friends with the Switch lite ~ any chance of one for that size?

Holoprops
Holoprops

Glad to hear you like it!
Unfortunately, I do not have a Switch Lite so I can’t do any test on my end. Maybe if you play with the scale of this model? I don’t know…
Have a great day.
alfredobahamondesa
alfredobahamondesa

You could do this same design for the steam deck, it's a console similar to the Nintendo, the files and dimensions of the console are on the internet, greetings! :)

Holoprops
Holoprops

Hi,
Unfortunately, I do not have a Steam Deck. Maybe in the future?
Cheers.
nsales75
nsales75

Killer model and came out perfect on my X1C! Thank you! Any chance there will be an updated version that will not cover the USB ports?

Thanks!

Holoprops
Holoprops

I am delighted to hear you're having a blast with the model. Thank you very much for sharing. I know about the USB ports....it is a pity. But opening a hole large enough for ports and cables will ruin the aesthetic. That's why I decided to block them. I hope that makes sense. Happy printing on the X1C, which looks fantastic!
laracardoza
laracardoza

I love this and can't wait to print it! I'd love to see something like this for the ipad...possible?

  • 1 j’aime
Holoprops
Holoprops

That's a great idea. I will keep that in mind.
blmckenzi3
blmckenzi3

currently printing this for my GF at 200mm/s on a heavily modified ender 3. input shaping and pressure advance both calibrated and enabled. Single perimeter and the scattered rectilinear infill in superslicer. its printing in transparent blue PLA. hoping it comes out well. so far so good! love the model!

  • 1 j’aime
Holoprops
Holoprops

How was it?

blmckenzi3
blmckenzi3

It came out perfect! A friend of mine also wanted one so two of them came out perfect 😁
kulmohusti
kulmohusti

Please do this for Playstation 5

Holoprops
Holoprops

I will when I can get my hands on a PS5.

  • 1 j’aime
v1ru5_1
v1ru5_1

What colour filament is that in the last image?

Holoprops
Holoprops

Quantum PLA from MatterHackers

  • 1 j’aime
denisemohr
denisemohr

I have a guider II and part B is coming in with the square on the bed and the crystal in the air. I tried rotating and just got speghetti. Please advise. This is a cool pring and I wanted to do this for my grands for Christmas. Thank you

Holoprops
Holoprops

Hello!
Try to use Cura or Prusa Slicer to slice your models, and you won't have any issues.
Happy printing.
PacFam
PacFam

Hello. I love this print and just finished if for my daughter for Christmas (both parts for the original switch at the same time because of color change filament) and the charging dock does not fit when together. I followed your guidelines and I can snap both pieces on the ends of the dock separately but not together. Any suggestions?

Holoprops
Holoprops

Hi there,
I am sorry to hear you have issues with your print.
Here are my leads:
- You printed the wrong parts for your specific Switch model.
- You have a modified dock or a cover that makes it larger than it should be.
- You scale down the parts by accident before slicing them.
These are my first guesses. I would try another slicer if nothing works.
I hope it will help. Happy printing.
kidxheart
kidxheart

Anyway to find the size of the print to see if it fits my bed?

Holoprops
Holoprops

Hi there,
You need at least a bed that is 175mm long. It fits a Prusa Mini.
I hope that helps.
Cheers.

Beubeuu
Beubeuu

Can I print this diagonally on a 150x150 bed?

Holoprops
Holoprops

I do not have a printer with this bed size to confirm that, unfortunately.

Beubeuu
Beubeuu

Could you cut a sheet of paper to size and try to fit the printed part on it? Could you show what the two halves look like?
aember
aember

omg if you could manage one for the Steam Deck, I'd be over the moon. Instant buy. This is adorable, great job!!

Holoprops
Holoprops

Thank you very much, I appreciate that. I don’t have a Steam Deck, but if I ever get my hands on one, I will make a Crystal dock for it. Cheers!
whoneedswords
whoneedswords

Printed this on my Bambulab X1C, both parts at the same time. Took only 4 hours like this a lot and fits great!

  • 2 j’aimes
Holoprops
Holoprops

WoW, 4 hours?! This printer is crazy fast; I should get my hands on one.

whoneedswords
whoneedswords

I’m sorry 4 hours and 38 minutes. 15% infill

hennyslides
hennyslides

bro what printer is that
MinorDetail3DPrints
MinorDetail3DPrints

part b for the oled?

MinorDetail3DPrints
MinorDetail3DPrints

I printed part A OLED & the unlabeled part B and it doesn't fit. did I Miss a file?

Holoprops
Holoprops

Hello there,
Part B works for the OLED and CLASSIC versions. Only Part A differ.
Can you explain your situation a bit further?

MinorDetail3DPrints
MinorDetail3DPrints

the clip in part A OLED is a tiny bit too large for part B. thank you though, ill try it again.

Holoprops
Holoprops

Please check your settings and ensure you do not have any elephant foot on your first layers; otherwise, it will be too tight to fit in. I hope that helps.

  • 1 j’aime
kangawookie
kangawookie

Can you post your layer height and estimated print time?

Holoprops
Holoprops

Layer height is already in the printing info section.
With my own settings on a Prusa mini, it took 6h per part (2 parts to print).

  • 1 j’aime
Littleferris
Littleferris

how much filament ish for these to print?

  • 1 j’aime

Page traduite par traduction automatique. Voir la version originale.

Vous souhaitez soutenir Cults ?

Vous aimez Cults et vous avez envie de nous aider à continuer l’aventure en toute indépendance ? Sachez que nous sommes une petite équipe de 4 personnes et qu’il est donc très simple de nous soutenir pour maintenir l’activité et créer les futurs développements. Voici 3 solutions accessibles à tous :

  • PUBLICITÉ : Désactivez votre bloqueur de publicité.
  • DON : Faire un don via Ko-Fi 💜.
  • BOUCHE À OREILLE : Invitez vos amis à venir découvrir le site et les magnifiques fichiers 3D partagés par la communauté !

Partager et télécharger sur Cults3D c’est garantir que les designs restent bien entre les mains de la communauté des makers ! Et non celles des géants de l’impression 3D ou du software qui possèdent les plateformes concurrentes et qui exploitent les designs pour leurs propres intérêts commerciaux.

Cults3D est un site indépendant et autofinancé qui n’a de compte à rendre à aucun investisseur ou aucune marque. La quasi totalité des revenus du site sont reversés aux makers de la plateforme. Les contenus publiés sur le site servent uniquement les intérêts de leurs auteurs et pas ceux des marques d’imprimantes 3D qui souhaitent aussi contrôler le marché de la modélisation 3D.