Airsoft Flashbang Grenade Impact Cap Gun Ring M84 Flashbang Sound Grenade "MK3A2 Offensive 8 Cap Grenade"

MK3A2 Offensive 8 Cap Grenade
For use in Airsoft or Gelblaster skirmish events
Impact Granade
Sound Grenade

3D Print Material PLA+ or better
Parts Required
1 x M5 X 65 MM hex head bolt and nut
8 x M4 x 25MM socket head screws + nuts
1 x M1.6 x 5mm grub screw (or M1.6 x 7mm Philips head screw)
1 x 4mm Dia x 15mm long x .6mm wire
1 x 14mm Dia x 1.4mm x 70mm long AEG Spring
1 x 2mm x 25mm split pin
1 x key ring
1 x alloy rivet stem 2mm cut to 25mm long
Assemble 8 x screws into Base the nuts will fit into recessed nut locators.
Assembly the M5 x 65 bolt into striker base and do up tight, add the lock ring to the top of bolt thread.
Install the spoon into the top cap using the rivet pin.
Use the small spring to fit between the spoon and the top cap and the m1.6 grub screw is used to lock the spoon into it's working position. (You can use the alternate Mini Spoon which is less prone to breakage)
TPU bumpers can be printed for extra impact resistance.