Boîte à jetons Kill Team 2024 Hivestorm - Modulaire

Modular Wargaming Storage System (3D Printable)

A customizable modular box designed to store:

Kill Team 2024 Hivestorm Tokens

https://cults3d.emulatorsite.com/en/creations/kill-team-2024-hivestorm-tokens

Team Token Sets (Kill Team 2024)

https://cults3d.emulatorsite.com/en/design-collections/s070808/kill-team-2024

Kill Team 2024 Hivestorm Rulers
https://cults3d.emulatorsite.com/en/3d-model/game/kill-team-2024-hivestorm-ruler-tokens-skulls

Games Workshop Approved Ops Card Pack (2024)

https://www.warhammer.com/en-DK/shop/kill-team-approved-ops-card-pack-2024-eng

Laser tools (line + pointer):

https://thearmypainter.com/products/target-lock-laser-line

https://thearmypainter.com/products/markerlight-laser-pointer

---

Print & Assembly Notes

The lid should be placed face-down on the build plate when slicing.

The lid doubles as a dice tray – For a more feel, consider lining it with felt.

There is holes in the corners of both lid and outerbox for 6x2mm magnets, should be push-fit (with some force), but if the tolerances is off, a drop of superglue should keep it in place

---

Modular Dimensions

All components use a unified naming format:

[type]_[x]-wide_[y]-deep_[z]-tall

Where:

x, y, and z are integers from 1 to 5.

Dimensions are cross-compatible across outer boxes, inner boxes, trays, and containers

Width and depth is interchangeable throughout the models, so 3 -wide_4-deep, is the same as 4-wide_3-deep

Example:

OuterBox_3-wide_4-deep_2-tall receives InnerBox_3-wide_4-deep_2-tall

You can also stack two 1-tall trays in racks, or inner box containers to fill the same box.

Final dimensions:

The biggest parts require a printer with a buildplate bigger than 223 mm x 223 mm, since thats the size of the biggest Lit and OuterBox, so if your printer is smaller than 223 mm x 223 mm, the biggest combination possible is 4-wide_4-deep_x-tall - The tallest part (OuterBox_x-wide_x-deep_5-tall) is 114 mm tall, so all commercially available printers should be able to print the tallest parts.

note for people with 220x220 printers - I'll create a OuterBox and Lid that is printable on such machines - I'll notify on the posting when it is ready

---

Component Types

OuterBox — the external shell that holds everything

Lid — matches width and depth of the outer box; always 1-tall

InnerBox — matches width, depth, and height of the outer box
ContainerRack — holds loose content that don't fit into the trays
OpenRack — open-format trays for more flexibility

Trays — specialized inserts for dice, tokens, etc.

InsideBottomContainers — open, open with "knob", or specialized containers for cards, rulers, etc.

InsideBottomEdges — required per layer when using bottom-level containers

---

Customization Examples

1. Full InnerBox Layout

Fill an InnerBox_x-wide_y-deep_z-tall completely with open or specific containers inner box containers
Print a (matching dimension) set of InsideBottomEdges for each layer

2. Mixed Layout

Use layers of containers + layers of trays/racks = totaling the height of the outer and innerbox

3. Tray-Only Setup

Stack Trays in Racks directly inside the InnerBox

---

Blender file is supplied for those who want to play around with the model, before Bevel modifiers and such is applied

---

The container is not restricted to Kill Team only, the open containers can be utilized for other game systems, its only the Specific Inner Box Containers and Trays that are directly related to Kill Team

---

UPDATE 2025-05-12:

Added lids with embossed and inserted Kill Team logo
Added tray with half-n-half circle and triangle tokens
Added smaller Outerbox and Lid for beds down to 220x220mm, for 5 wide and/or 5 deep
Fixed minor (mostly non-issue) errors in the mesh for the OuterBox

No magic here, just print at 0.2 mm layer height, with no s - The only thing that needs to be adjusted when dragged into the slicer, is the lid - it must be placed upside down on the build-plate.