Encart pour Seti (CGE)

Unofficial Insert for Seti (CGE)

No lid lift
s sleeves (I use sleeve kings brand standard thickness sleeves)
s vertical or horizontal storage (nothing should move around, even if you shake the box)

Longest model : 249mmx188mm (split versions available for max model size of 193mm x 193mm (resource try printed in a diagonal orientation))
Total grams at default .2 bambu lab slicer settings (except 8% gyroid infill) : ~929 grams around a spool of filament but totally worth it!

NOTE: The player trays slide in and lock into the player sleeves to become one piece (needed to do this to avoid s and allow the one card to fit on top of the player trays as a cover). If they are stiff, I suggest fitting them together and taking them apart a couple times to loosen them up. They should mate easily until the last 30mm or so then click firmly together.
NOTE: all model names that start with "SPLIT" are optional versions for smaller print beds.
NOTE: all model names that start with "UNSLEEVED" are optional versions for unsleeved cards, the sleeved versions are the default.
NOTE: the bottom two layers (layer 1 and layer 2), that hold the modular board pieces, can either be glued together or just placed in the bottom of the box (up to you) for either the 2 piece or 4 piece versions.

Print settings : normal for your filament, no s needed and I recommend 8% infill minimum

NOTE: there will not be an update to this insert for the announced expansion unless I decide to do one with a bit of lid lift (there's just not much room left).

normal for your filament, no s needed and I recommend 8% infill minimum