Échelle 1/64 (taille Hot Wheels) Racing Garage

NOTE: COPYRIGHT PA1© - PERSONNAL USE ONLY. COMMERCIAL LICENSE ON MY PATREON. FULLACCESS AS SOON AS YOU , MULTI PARTS DESIGNS SO NO NEED FOR A MULTICOLOR PRINTER AND MOST OF THE PROJECTS ARE FREE!!! LINK TO PATREON:

https://www.patreon.com/PA1_MAKER

---

For the past 2 years, my Hot Wheels dioramas have been almost all exclusive to my Patreon. So this is the first one to be released on a public platform in the last 2 years!

I needed a garage to house my little BRE Datsun Sunny Truck. So I created one!

It's BRE-themed, but it can ultimately be customized with any colors/sponsors.

You can follow the theme I chose, but you can also customize it however you like and use elements from other dioramas, such as the drag strip sponsors (available on Patreon), the tools/cabinets from the earlier dioramas or any other parts from my dioramas.

Like most of my Hot Wheels dioramas, it has the following features:

-Made with FDM printers in mind.

• All parts print without s.

• The project can be printed on a mini-sized printer.

• All parts are positioned correctly for printing.

• Some parts require color changes, but this can be done on any type of printer. If you're not familiar with layered color changes, send me a private message and I'll be happy to guide
  you.

• Complete instructions are included. It's important to follow them carefully to avoid
  mistakes.

• A BambuLab project file is also included. See notes below.

NOTES:

• Some parts are very small. I therefore recommend using at least 3 or 4 walls for a minimum of strength.

-In the BambuLab file, you'll see that there are three small workshop stools on the bed. This is to reduce the temperature in the part during printing. You can use one, two, or three in your diorama, it's up to you. If you have a printer other than BambuLab, I suggest putting at least two stools on your bed to achieve the same result and have a bit of cooling time when moving from one part to another.

-If you have difficulty with small parts, feel free to add a brim. Or if you prefer good old fashioned glue sticks, go for it; we won't judge you here! :)

-I used tweezers to position the small parts. It will help you greatly if you do the same.

-The tool chest wheels are infinitely small. The meticulous fool that I am absolutely wanted them, but honestly, they're optional. You can glue the tool chests directly to the floor if you don't want to struggle with the mini wheels.

-Finally, in the BambuLab project files, all the color changes are applied but BY LAYERS. Not painted. So you NEED to slice the plate first to see the colors of each multicolor part in the
print preview.

All filaments used are from Polymaker's Polyterra range, except for the following two:

-Clear filament: Spectrum - Translucent

-Blue: Overture PLA Digital Blue

If you have any questions about the project, please let me know!

Have fun!

MORE MODELS ON PATREON. ALMOST 50 DIFFERENT DESIGNS AVAILABLE