Etui souple pour Iphone 13, Iphone 13 Mini, Iphone 13 Pro, Iphone 13 Pro Max (Set)

Iphone 13, Iphone 13 Mini, Iphone 13 Pro, Iphone 13 Pro Max Flexible Case (Set) These cases are designed to be printed with any flexible filament especially TPU for both generic and branded filaments.

Version with Apple logo included

Choose the right size for your device!

These are characterized by their enveloping design that cover the entire device with a thick layer of filament without counting the screen. These design do not require s which are often difficult to print with flexible filaments.

Advantages:
- Smooth corner protection.
- Hidden button design.
- It resists very well the impacts of falls.
- Easy printing, no s required.
- Button protection.
- Button design calculated to fit perfectly without losing flexibility by covering each button.
- Elegant design.
- Two thickness versions.
- In case of adding a rear camera protector, it is preferable to use the V1 version from each type due to its thickness that aligns with the camera protector.

WARNING! Due to the design, it is not intended to be printed with non-flexible filament (PLA, ABS, PETG, etc). It is under your responsibility, and if you try it, do not hesitate to leave your comment on how it went with your experiment :)

Files of each case of Iphone 13, Iphone 13 Mini, Iphone 13 Pro and Iphone 13 Pro Max are included in a Zip file.

Designed in 2 versions depending of the thickness you want!

V1: Thick

Pros
- Extra protection on the back of the case
- Depending on the print settings, it can be printed with a specific infill to vary the flexibility and protection of the case.
- Better wraps around the device to resist drop impacts

Cons
- Larger printing time.
- More filament is required (gr).
- Thicker.

V2: Thin

Pros
- Less printing time.
- Less filament is required (gr).
- Thinner.

Cons
- Less protection on the back of the case.
- Can't add fill pattern on the back of the case.

Iphone Flexible Cases
- Iphone 11 Models
- Iphone 12 Models
- Iphone 13 Mini
- Iphone 13
- Iphone 13 Pro
- Iphone 13 Pro Max
- Iphone 14 Models
- Iphone 15 Models

• Extrusion temperature: 195°-220°C
• Bed temperature: 50°C
• Perimeters: 2
• Infill Pattern (Recommended): Cubic 15%
• s: No

In case you want to vary the infill in the back for V1, first configure:
- Solid Layer Top: 3
- Solid Layer Button: 3

In case of using old or generic flexible filament, for better results you can customize:
- Extrusion Multiplier: 0.98 - 1.12

¡Do not forget that this is only a recommendation, it is up to you to modify the printing settings to your liking!