Objectif Canon FD 35mm f2 Cine_rehousing

This upgrade is a Canon FD Prime Lens Cine Lens Hougrade for the Canon FD 35mm f/2 S.S.C(II) Lens, known as the convex version. The outer diameter of the concave version is almost the same, so it can be installed, but the aperture value is different from f/22 of the convex version, which is f/16, so it is not completely compatible.

https://youtu.be/gGMhKvXWbfc

The inner diameter of the middle part of the attached housing is small, so it may not fit well when assembled. If there is no problem with disassembling and reassembling the lens, remove the mount part and aperture ring on the rear of the lens before installing, and then assemble.

The front filter boost ring is designed to make filter installation easy, and it is designed to firmly fix the housing with a front finish, so do not omit it. Fixing requires 4 x M2.5 x 8mm bolts, and the 0.8M gear needs to be fixed with adhesive.

• Required parts other than 3D printer output

• M2.5 x 8mm bolts (flat head) - 4 pcs (black painted iron screws have rust problems, stainless steel screws are recommended)

• 55-58, 58-62, 62-67, 67-72, 72-77, 77-82mm step-up rings (filter adapters)

• Super strong adhesive

0.4mm Nozzle
0.2 layer height
10% Infill
PLA + Matte black, Sliver
No s required