Adderini - Arbalète à répétition imprimée en 3D / Pistolet arbalète

I've printer the mini adder v2 included in the files. One built, it's extremely effective. Solid construction, reliable, generally well designed and certainly more than just a toy.

I bought all the none 3D-printer parts on maker-kit and printed all parts in PETG black and PETGH gray for all the parts the interacts with (bottons, triggers, etc.

However, understand that is not an easy print. You will have to paint your own s, ensure clan finish on some parts, use lube, adjust strength settings based on the part, etc.

Although, the whole process is fun and you can't argue with the end results. I'll likely print the Adderini next just because it's such a fun project.

Kann man den theratube für die miniadder durch etwas anderes ersetzen, zb durch tpu Druck oder eine Feder oder so etwas? Will nicht so ein ganzes Ding kaufen für die paar Millimeter.

Hello,

Where can I find the "LWC_adderini_buttstock_shaft_left_side" file? Unfortunately, it's not in the folder. Without it, you can't use the stock, which looks really good.

Thanks

Everything came together quite nicely but the string doesn't reliably engage on the catch on the trigger. Occasionally it will slip off the trigger catch during cocking and lead to an accidental discharge. RIP my garage ceiling tile. If I push the cocking lever a little extra at the end of the stroke it's more likely to catch on the trigger but still there is risk of accidental discharge.

Its been 2 years since we saw Joerg testing the V3. We're never going to get the V3 😩😩😩 :p

lever action?!?!

Ist es wirklich notwendig in PLA zu drucken, warum kann nicht auch PETG verwendet werden, ist das nicht sogar strapazierfähiger?
Danke für Deine Antwort :)
LG

Moin,
Gratulation für den Build erstmal.
Wie groß muss bitte das Druckbett maximal sein?
Ich habe noch einen kleinen Any mit 220x200mm ;)
LG

Can I just buy a bow string for the slingbow version? I'm almost done with it but I don't want to serve a bowstring.

kann man hier echt nicht mit Bitcoin zahlen ?!!

Hi, is the elastic crossbow version the same as the bow version? Or are they different files for printing?

Any one fixed the issue with the rails from the front body breaking?
Or how to use it with another slicer as ideamaker is still not producing a strong enough print

Is there a V3?

Kommt bald mal etwas neues?

Is there a release date for version 3 mentioned in this video by Jörg Strave https://youtu.be/jKDQfYBglEI?t=291

Hello, is there a way of stopping the arrow bolt sliding out when pointing downwards , many thanks

Hallo,

Das Teil ist klasse ! Vor 2 Tagen erst gekauft und jetzt schon fertig!

Ich habe nur ein grösseres Problem, beim spannen fes Bogens , springt der Gummi immer wieder zurück.

Woran kann das liegen?

Vielen dank für die Hilfe vorab.

Hello,

The Adderini is great ! Bought it just two days ago and it's already set up!

I only have a bigger issue: when tensioning the bowstring, the rubber keeps snapping back.

What could be the reason for this?

Thanks a lot for the help in advance.

can i use the rubber therabands or tubes with the "MINIADDER V2" MODIFIED BY FARAMIR ?

Hiya, no problems for me at all. The whole thing has been a joy to print and build.
Built 3 already of different variations and colours. Personally i like the rubberband one more than the crossbow. Thanks for a wonderful design and very well done product

Hi, I would love to buy the files but none of the two payment methods work for me. Is there no way to pay via Paypal? Or anything else?

Hello, i got my miniadder v2 set up in crossbow config, but i’m getting the issue of magazine rail breaking multiple times now. i’m using the recommended setting in PETG but it’s not strong enough. i saw people saying printing in PLA+ is better. Could anyone share their settings on the magazine rail print in PLA+ that does the trick without breaking? i’m using the same 80 pound bow described in the pdf file.

Length of bow string inclusive of loops for the adderini limb version?

Is there the LWC_adderini_buttstock_shaft_left_side.stl missing or is just me?

Hey, I'm pretty new to 3D printing, and I run into this problem where when I import the STL file into my slicer the size is wrong, I tried using other programs as well but all of them couldn't or just didn't use/show the correct size of the parts, what can I do? is there a place I can find the sizes of all the parts?
( sorry about my bad English ) ,

When is the mini at v3 coming out? With the magazine that can be dropped in etc, as reviewed/down by Jorg...

Are there any other limbs that can be used? The EK Archery Cobra are not available in my region at the moment and unfortunately shops never have exact dimensions in the product details, so I can't check which ones are compatible.

there is no way to pay for cant buy it can u release the files PayPal's not accepting payments for anything weapon related

Hey Jaaanik, I had designed a wall mount for the Miniadder and i wonder if it's also possible for the Adderini?- i don't see the size of the front width without the bow in your discription!
Do you like to add to this information in your discription or send it me here?
The diameter of the free space is 45 mm. Is it enough?

Here is the link, if you don't feel me --> https://cults3d.emulatorsite.com/:1339033

Hi, I am new to 3d printing but confident to build the slingbow , I am trying to get the parts kit from "maker kits " but the page isnt working , i can get the parts one by one I guess but I am not sure where to get the bow string or the rubber

i'd like to print the miniadder v2 AR15 folding stock for the adderini, but the plug adapter is different. it's a rectangle on the miniadder and more of a cylinder on the adderini, anybody get this to work successfully?