1ère Génération 1992 Mitsubishi 3000gt Oeil de Serpent Lentille, , et Goupille

This is a reverse engineering document set for 1st Gen 1992 Mitsubishi 3000gt Snake Eye Light Lens. A real world version of this was taken and all measurements used to construct this set of model files.

The reference lens was used to crate this variation, which can be printed in clear resin to convert the unit to a functional light.

All files contained within are as close to exact of initial real world object as concluded through detailed measurements. These measurements were taken from the source and are promised to be accurate enough for reference use within 0.1mm accuracy. If any critical dimensions are incorrect in any way, we ask for direct so that we may correct this file for you and future s.

Contained within this file pack are the 2 most common file types of the object, STL, STEP, along with technical drawings related to critical information used for references in deg more complex uses.

Files for the metal Bracket used on OEM Lens and screw in locating pin also included in STEP and STL variants.

Recommended online shops for advanced printing/fabrication needs: Craftcloud, Rapid Direct, SendCutSend.

It is recommended that this model be printed from UV cure ABS-like anti-yellow resin in clear and then spray coated with 2K-Clear UV protectant resin. This will help to prevent the unit from yellowing/cracking from sun exposure.