Super (Chill) Luigi Multi Part

Design is to be printed out in separate parts in the corresponding colors to eliminate the need to paint. This also allows everyone to be able to print this design regardless of what printer you are using.

This is one of my favorite designs yet. Luigi laid back and chilled with his iconic hat on backwards and sporting a hoodie.

The original size is about 210mm tall, or a little over 8.25 inches when completely assembled. I do not recommend scaling this down, as the details in his eyes will not print out without switching from a 0.4 to 0.2mm nozzle.
Of course, I created a larger version, scaling it up as big as I figured it would fit on my Bambu build plate. At 220%, I added an “L” logo on his shirt and adjusted the clearances between the parts. Fully assembled, the 220 version stands 462mm or a little over 18 inches.

Printing…
I completed all the test prints in the small and 220 versions without . All Parts will load into your slicer as intended. Printing should be fairly simple for these versions. I have included the 3MF files I used to print the design and take the photos seen.

Assembly…
It should be fairly simple. Dry-fit everything in place before adding glue.
I highly recommend PLA Gloop, if you can get your hands on it.
PLA Gloop Website
Starbond Adhesives make a good CA or super glue alternative at a lower price point. I recommend the Medium or Thick formula. I would defiantly pick up some Accelerator if your planning on using the Thick formula.
Assembly was relatively simple on this design and there isn’t too much to add. I kept adjusting the eyes and the clearances in these pieces in the design but couldn’t get the eyepieces to just fall into place. A small amount of force should be enough to press the blue eye part in place and then press the black eye part into the white eye piece.
Everything else should be self-explanatory once all the pieces are printed out.

Suggested Filaments
I used 2 different skin tones to print the smaller ones, as you can see in the one Pic. I do like the Bambu Matte Latte slightly more than Duramic Matte Skin. The Bambu Matte latte is a shade darker.
Bambu Matte Latte PLA
Duramic Matte Skin PLA
Bambu Green basic PLA
Bambu Cobalt blue Basic PLA
Bambu Matte Dark Brown
Bambu Matte Black PLA
Bambu Matte White PLA

Happy Printing, and Enjoy!!

You can follow me on Instagram, https://www.instagram.com/pla.n.pa/
to find out what I designs I am currently working on

If you want to sell prints of my designs, become a Patreon er here.
https://patreon.com/planpa3d

Thanks for checking out my design.