Kasumi - Dead Or Alive - Collectible Legendary 3D Printing Figure Stl

For More models and Rewards :
Patreon : https://patreon.com/NuskulArt

Kasumi Youtube Preview : https://www.youtube.com/watch?v=w4JVvbipOJg

Kasumi - Dead Or Alive - Collectible Legendary 3D Printing Figure Stl

Kasumi Full Parts

1.Kasumi Full Figure
2.Kasumi Full Figure NSFW
3.Kasumi Base Stand
4.Kasumi Hair Ribbon
5.Kasumi Pony Tail Hair
6.Kasumi Tanto
7.Kasumi Tanto Ribbon 1
8.Kasumi Tanto Ribbon 2
9.Kasumi Leg Ribbon Right
10.Kasumi Leg Ribbon Left

Kasumi Disassembled Parts

1.Kasumi Head Disassembled
2.Kasumi Ponytail Hair Disassembled
3.Kasumi Hair Ribbon Disassembled
4.Kasumi Base Stand Disassembled
5.Kasumi Body Disassembled NSFW
6.Kasumi Right Arm Disassembled
7.Kasumi Left Arm Disassembled
8.Kasumi Torso Disassembled
9.Kasumi Hip Disassembled
10.Kasumi Right Leg Disassembled
11.Kasumi Left Leg Disassembled
12.Kasumi Right Leg Ribbon Disassembled
13.Kasumi Left Leg Ribbon Disassembled
14.Kasumi Tanto Disassembled
15.Kasumi Tanto Ribbon 1 Disassembled
16.Kasumi Tanto Ribbon 2 Disassembled

Kasumi Sliced Flat Cut Parts

1.Kasumi Head Sliced Flat Cut
2.Kasumi Ponytail Hair Sliced Flat Cut
3.Kasumi Hair Ribbon Sliced Flat Cut
4.Kasumi Base Stand Sliced Flat Cut
5.Kasumi Body Sliced Flat Cut NSFW
6.Kasumi Right Arm Sliced Flat Cut
7.Kasumi Left Arm Sliced Flat Cut
8.Kasumi Torso Sliced Flat Cut
9.Kasumi Hip Sliced Flat Cut
10.Kasumi Right Leg Sliced Flat Cut
11.Kasumi Left Leg Sliced Flat Cut
12.Kasumi Right Leg Ribbon Sliced Flat Cut
13.Kasumi Left Leg Ribbon Sliced Flat Cut
14.Kasumi Tanto Sliced Flat Cut
15.Kasumi Tanto Ribbon 1 Sliced Flat Cut
16.Kasumi Tanto Ribbon 2 Sliced Flat Cut

This product is Nuskul Art Collectible Edition.
Designed using 3D Max and Zbrush. -It is a detailed product that can be easily printed.

Follow me for more models
You can send me a message about the model or in general.
You can also reach me via social media.

Patreon : https://patreon.com/NuskulArt
Twitter : https://twitter.com/YunusKullebi
Instagram: https://www.instagram.com/yunuskullebi/
Instagram : https://www.instagram.com/nuskulart/
Linktr : https://linktr.ee/yunuskullebi

Print Temperature : : 200
Table Temperature : 60
Layer Height : 0.2 mm
Intıal Layer Heigt : 0.2 mm
Wall Line Count : 0.4 mm
Fill Density : % 20

Stracture : Tree
Maximum Branch Angle : 60
Branch Diameter : 3
Trunk Diameter : 16
Branch Diameter Angle : 5
Placement : Everywhere
Prefferred Branch Angle : 25
Diameter İncrase to Model : 1
Minimum Height to Model : 3
Intial Layer Diameter : 6
Branch Destinty : 20
Tip Diameter : 0.8
Limit Branch Reach : Yes
Optimal Branch Range : 30
Rest Preference : On Model if Required
Overhang Angle : 55
Pattern : Gyroid
Connect Lines : Yes
Density : 5
Line Distance : 8
Intial Layer Line Distance :8
interface Thicknes : 1.2