FAUCON MILLENIUM

THE MODEL :
I'd like you to build a model of the famous FAUCON MILLENIUM from the STAR WARS saga, measuring 940 mm long by 680 mm wide and 260 mm high.
This magnificent model is made up of 326 parts to be printed on your wired or resin 3D printer.
All files are in STL format, ready to print.
THE BOOKS :
Included in the files is a 400-page booklet in PDF format (to print or not), with more than 700 images and photos, which gives you all the instructions for printing the 326 parts:
The orientation of the pieces on the tray and the type of hanging recommended.
The type of backing to use.
The number of printing layers.
The colours of PLA threads I recommend.
The recommended printing temperature.
The filling percentage.
And also the printing time, weight and length of wire to be used for each part.
( See screenshot )

The recommended assembly order is also indicated.
If you wish, you can also include LEDs for greater realism.
Everything is indicated in the booklets.
The booklet is available in FRENCH, the original version,
then in ENGLISH (thanks to Brian BALES),
But also in SPANISH ( Thanks to Fabian ALEJANDRO GAROFALO ),
Both of the CULTS 3D community.
A very big THANK YOU to both of them for translating a 400-page booklet !!!!

At the end of the booklet you'll also find a summary of the parts to be printed in the form of a table, which is very useful for finding out what's already been done and what's still to be printed...

Please note that the model corresponds to my version of the Millennium Falcon from Star Wars Episode IV and that there are additional parts to print to convert it to its Episode V version (Empire Strikes Back) and that ing is free and available at the following address:
https://cults3d.emulatorsite.com/fr/mod%C3%A8le-3d/art/faucon-millenium-empire-stick-back

VIDEOS:
You'll also find two videos showing the results I've achieved after four years of modelling, printing and editing.
A video of my model.
https://youtu.be/R62PV8Wq8uw
A video of the assembly.
https://youtu.be/OBdw3AoLIOQ
Happy printing and editing.
NOTE: You can me directly at the following address:
[email protected]
Thank you for trusting me.
Philippe.

Modification of June 11, 2024 :
Addition of the missing part FM 29-33-35-B1
Addition of booklets in English and Spanish.
Addition of the link to the episode V option
Addition of the email address to me directly.
age of the descriptive text on the CULTS3D page in English.

Modification 14-06-2024
Addition of the missing part FM29-33-35-B1 ( et non FM 29-33-35-B ) Sorry.
Philippe.

Modification 24-07-2024
Nex item FM-06 ( without tube present on FM-04 );

Translated with DeepL.com (free version)

Most parts are printed in 1.75 mm diameter PLA wire at 200°C with a 30% fill.
Four layers for the wall.
Tray adhesion with 8-line border.
All information is available in the PDF booklet.
I used a printer with a 300x300x400mm tray. ( ARTILLERY SIDERWINER X1.
You'll also find two videos showing the results I achieved after four years of modeling, printing and assembly.
A video of my model.
https://youtu.be/R62PV8Wq8uw
a video of the assembly.
https://youtu.be/OBdw3AoLIOQ

Translated with DeepL.com (free version)