Tour à macarons festonnée 7 étages

This was made on a Snapmaker 2 in PLA with a layer height (resolution) of 0.16 mm, initial layer height of 0.28 mm, infill density of 10%, and a print speed of 150 mm/s (outer walls at 75mm/s). I used the stock Luban slicer. The 225 mm layer took about 10.5 hours. The smallest 100 mm layer took about 1.5 hours. The other 5 layers took durations in between those.

Each tier mates very snuggly to its neighbor. It looks very good. Great design!