Flexi Print-in-Place Fish

What a GORGEOUS model. Thanks Dan Sopala for the great design. No s, Print-in-place, no brim

Printer: Ender 3 V2 (100% stock)
Color Changes dones using PAUSE function
Filament: Poloroid Light Green and Red, Sunlu White, and Hatchbox PLA Black
Scale: 80%
Sliced with Cura 4.6.1
Time to Print: 4h
Material Consumption: 21g 6.62m
Nozzle 205/Bed 60C (stock glass bed, textured side)
Layer height: 0.2mm
Walls: 2
Wall Thickness: 0.8mm
SHELL > Outer Wall Wipe Distance: 0.4mm
Top Surface Skin Layers: 1
Top/Bottom Thickness: 1.2mm
Top Layers: 4

Bottom Layers: 3
Infill: 15%
Initial Layer Flow: 100%
Print Speed: 60m/s
Infill Speed: 60
Outer Wall Speed: 40
Inner Wall Speed: 50
Top Surface Skin Speed: 40
Retraction Distance: 7.5mm
Retraction Speed: 45mm/s (retract before outer wall)
Combing Mode: ON-Not In Skin
"Avoid Printed Parts When Traveling": ON
Generate s: OFF

I hope you enjoy, and print one!!