Vehículo de asalto de lujo Stagger MK2

I present to you the much more intricate version of the Kei 13 Stagger! All 3d printed except for 2 100mmx2mm steel rods for the axles which press snugly into the rims, and one small section of a 2mm rod between the steering wheel and the steering column, and one final 2mm rod for the trunk hinge.

I have not utilized it, but a piece of filament does fit well enough in the hood and trunk hinges that you could probably replace those metal rods, and maybe even the one for the steering wheel with lengths of filament.

To get the angle on the steering column without needing s, I heat up a section of 2mm rod, slide it into the steering column, wait a few second, and then bend the steering column down slightly with the heat from the steel rod. The newer steering column options should not require this.

This version features a functional hood, functional trunk with lid-mounted rockets and rocket launcher, several versions of windshields with mounted guns for the enger, and an easy to assemble engine to fit neatly in the chassis under the hood.

Everything is completely designed from scratch except for the Mount for the machine gun, it uses a ball and socket from the Dummy 13, and uses a head frame piece to push into the gun itself. The piece in the trunk to hold the rocket launcher is also a modified socket from dummy 13 as well.

Thank you for those pieces and the original Dummy 13 from
https://www.lucky13toys.com/