The Predator Inspired Movable Mask

Hi! Yes, of course! Please me via Instagram (sonndersmith) and I’ll send you the link to the files from my Google Drive.

Hi!
Sorry for the delay, for some reason I missed a notification about your comment. Springs won’t work in PLA, the other parts can be printed out of it.

Hi! Sorry for the delay and thanks a lot for your , it will definitely help me to make the model better. How much more space do you need at the chin (in millimeters) if a nose part of the mask sits the proper way?

15mm? the magnet bay next to the upper fangs (below the nose, not the extending ones) is entirely visible when the mask opening is at a comfortable height, with a small gap between

Hi! Thank you! I recommend to sand the pieces after they are glued together. And I don't recommend to sand, putty and paint conical surfaces that create hinges.

Hi, could you send me the file "other parts" but in separated pieces pls? my 3d printer has a problem printing all the pieces at once, thank you :D, my email is [email protected]

I've sent you the link to full package of separated files just now, please check it out.

I have it, thank you so much :D

Hi! Okay, just let me know your email.

[email protected] muchísimas gracias. :D !

I've just sent you the files, please check your inbox.

I took the little springs out of the file...
I made 3 new files with the big springs, small springs and the rest of the components...

Hi!
Thank you for ing me.
If you use Cura slicer, there's a checkbox named "print thin walls" in Cura settings, chapter "Walls". First make it visible in the and then turn it on. It might help in such cases.
I'll put this advise in the product description, thank you!

Hi
"print thin walls" it's always on.
However, it is not printed.
I will try to print each part individually.
Thank you.

I've made fang springs a bit thicker and ed the file to my Google Drive, here's the link: https://drive.google.com/file/d/1h0EQb-W8RaQzWVudJWcAxMRM6qfPfrEK/view?usp=sharing

Thanks very much
I'll try it right away.
I'll report back with the result.
Have a nice day

Okay, thank you in advance.

Okay so:
they don't look very nice but they are 98% complete. :))
Unfortunately I can't add any pictures here.

Normally you don't print petg slowly.
PETG is a world of its own, not really for beginners...
There are a lot of tests necessary until everything runs well.
Sometimes also a new leveling...

In this case, it is very important, at least for my Printer, that this spring ar printed slowly, otherwise it will break.
In any case, it brought a lot, I couldn't print the old spring even slowly.
Thanks very much!

I suspect that the whole thing is related to my Monster Printer because the parts are very fine.
I'll need a few more days until hopefully all the parts are ready.
I'll keep you posted on how it goes.

Thanks!

I'm glad you like my work, thank you! Yeah, you can use 10x1mm magnets, but they are too brittle so be carefull attaching them to each other. You also can choose combination of 10x3mm (10 pcs) and 10x5mm (2 pcs) magnets, in this case use files from the folder named “For_3&5mm_magnets”.

Thank you! Yeah, just let me know your e-mail and I'll send you the file. Do you need fang springs or lever springs?

alexandre039live.fr the 4 spring thank you

thank you I have ed I cannot open PRD2.6_Lever_Springs

[email protected]

Okay, I've saved it as OBJ and ed one more time: https://drive.google.com/file/d/1YWmRANnEHY4dQCdVhac0azvZZdz-AJ4p/view?usp=sharing

hello to you I made a mistake on the springs I forgot the two big springs spring jaw high spring jaw low spring madible sorry google translator

Okay, no problem.

Every file should be uniformly scaled up to 110%.

Hi! Thank you for the purchase! I have my own Wolf Predator full mask 3D model and I'm going to combine top part of it with the movable half-mask, but I'll be able to do that only after finishing my current project, I think it will be in November. It's not as simple as it might seem. I'll let you know when it's done. My Wolf Predator mask is here: https://www.cgtrader.com/3d-print-models/hobby-diy/other/the-wolf-predator-wearable-mask

Hello, may I ask if this project has been completed?

same here would love to see a top half combine too looks amazing

I realized recently that 3D printed line (0.4mm wide) can be used instead of fishing line. Its length should be at least 28cm. I'm going to add this line as 3d model into the files pack today.

It's done, the file name is "Print_it_and_fold_in_half_Instead_of_fishing_line.zip"

Hi! There's a door method, it's shown in this picture: https://drive.google.com/file/d/1Orz4KvEYFmpdSLdOegv9WGnTi0Vr6EVC/view?usp=sharing
Only width of a head should be measured, without ears. Usually it's about 14-16.5 cm

Thanks! Looks like I’m 16cm and that puts me at 106%. Just a hair too big for my print bed!

How big is your build volume?

I misread the volume. Mines 220 220 250. We should be good to go.

Hi! I'm afraid it's not about your slicer, I merged s on purpose because ordinar s gave unstable results on different printers, sometimes they sticked to the surface very tight, in other cases they affected surface quality. Merged s always give good result, the only lack is you have to cut them off each time, but it's a lesser evil. I can send you the files without s but in this case I can't guarantee that mechanism will work as my one.

Yes please [email protected]. If it does work than it's not on you. Thank you so much :)

Okay, I've just sent you the files.

Thank you!!

Thank you! I would like to take a look at your work, can you me directly?

sure, once im done with printing and getting all the parts in, ill you with a video/image

Oh, and also how would you measure your head? it says above ears so does that mean just like put the tape measure above your head and just measure it like that?

It's here https://youtu.be/1uUUhSKz1iU

I'm new at this website, sorry. Is there a way to add a tutorial somewhere here?

just include the link in your description

Thanks! It's forbidden on some other services but Cults as I can see even make this link clickable, that's great.