Skip to content

CAROUSEL Lamp with Mechanical Movement

Advertising
Share
Add to
Make
Advertising
License
Usages
3D design format
3 files (ZIP) Close
  • fd -CAROUSEL pdf Files -v05.zip
    • fd -CAROUSEL Materials used -v03.pdf
    • fd -MERRY GO ROUND Assembly Instructuions -v01.pdf
    • fd -MERRY GO-ROUND Color Changing Parts & Printing TIPS -v03.PDF
  • fd -MERRY GO-ROUND - STL files -V02.zip
    • fd -BASE -v01.STL
    • fd -BASE DECORATIONS -v01.STL
    • fd -BIG GEAR -v01.STL
    • fd -BOTTOM PLATE -v01.STL
    • fd -BOTTOM TRACK -v01.STL
    • fd -CENTER STRUCTURE -v01.STL
    • fd -CENTRE STRUCTURE DECORATIONS -v01.stl
    • fd -HANDLE ARM & CYLINDER -v01.stl
    • fd -HANDLE SLEEVE -v01.STL
    • fd -HOURSE POLE SLLEVES -v01.stl
    • fd -HOURSE POLES -v01.stl
    • fd -HOURSES HALF 01 -v02.stl
    • fd -HOURSES HALF 02 -v02.stl
    • fd -LIGHT CYLINDER for LED STRIP -v01.STL
    • fd -LIGHT CYLINDER for TOOLMOON -v01.STL
    • fd -ROOF -v01.STL
    • fd -ROOF DECORATIONS -v01.STL
    • fd -ROOF FLAT DECORATION 6 of 12 color 1.STL
    • fd -ROOF FLAT DECORATION 6 of 12 color 2.STL
    • fd -ROOF TOP CAP -v01.STL
    • fd -SMALL GEAR -v01.STL
    • fd -TOP FRAME -v01.STL
    • fd -TOP FRAME CAP -v01.STL
    • fd -TOP FRAME DECORATIONS -v01.STL
  • fulv -CAROUSEL -Bambu Lab Project -v01.zip
    • fulv -CAROUSEL -Bambu Lab Project -v01.3mf

Learn more about the formats
Last update 2024-07-31 at 17:38
Publication date 2023-05-03 at 19:02
Design number 1201054
fulv

fulv

Certified
Issue with this design? Report a problem.

6 comments

Add a comment

6 comments

kknittig
kknittig

Any guidance on placing the lights in the carousel? I'm using the LED light strip and it says to use 3m but that seems like a lot for the cone that goes inside it. Do you continue them up into the top part of the carousel?

  • 1 like
fulv
fulv

Hi, just simply wrap them around the cone and when you get to the top you can cut them. Make sure you cut the LED strip in between the copper pads or it will stop working.
I hope this helps :)

kknittig
kknittig

I wrapped them starting at the bottom and worked up so I could put the cord down the middle of the cone. I could not see where else to go with the cord if I went the other direction

  • 1 like
fulv
fulv

You could have started from the cord being at the bottom and work your way up with the strip and then cut it at the end

kknittig
kknittig

Then I couldn't screw the cone in because the cord was in the way
Derftoy
Derftoy

I just finished printing this, or last plate is printing. Do I glue everything except what you say not to glue in the instructions? I usually go glue happy so my models are sturdy, and I don't want to glue things that should not be glued.

  • 1 like
fulv
fulv

Yes please follow the instructions if you want the carousel to work as aspected :)
dvjaureliohdez
dvjaureliohdez

Interesting models but if they don't include the engine parts, I'm not interested. If we are paying for the model, we should include it and not tell the client to design it.

fulv
fulv

The description of the models is very clear and the price is very low. I am sorry that was not good enough for you.

Kind regards

Fulv :)

  • 1 like
miguelon3
miguelon3

hola , antes que nada darte las gracias por hacer este diseño tan bonito , ya lo tengo todo impreso menos los caballos pero tengo una duda , los caballos como se ve en las imágenes tienen 5 colores gris , amarillo , blanco , azul y marrón pero a la hora de imprimirlo solo esta para hacerlo con 4 colores , no se si usted a pintado manualmente algún color . ¿podría usted arreglar eso ? , solo me faltan los caballos estoy a la espera que usted me diga para poder seguir y terminarlo.

miguelon3
miguelon3

utilizo una bambulab P1S con AMS multicolor

  • 1 like
fulv
fulv

HI,
thank you for your message.
Are you using the Bambu Lab Project file?
4 colors are correct :)
I have to updated the pdf file, please use the following details instead:

• layer from 0 to 12 (2.4mm) Horse body &tale
• layer from 12 to 16 (3.2mm) Horse body
• layer from 16 to 20 (4.0mm) Horse Belts, shoe & Mane (hair)
• layer from 20 to 22 (4.4mm) horse saddle

Let me know if this makes it clear :)

Kind regards

Fulvio

miguelon3
miguelon3

todo perfecto un millón de gracias

  • 1 like
fulv
fulv

You are most welcome :)

Hellowhats
Hellowhats

Hello, do the files include dimensions of the parts and such ? I want to do this project on solidworks but I don’t know the details of the parts and what they are and measurements , will buying this help me?
dvjaureliohdez
dvjaureliohdez

Same as the other one because you don't include the part or you modify it to use it with an engine, that can motivate people to buy more of their designs.

fulv
fulv

Hello,
You can add the motor on the outside
The only part you need to design is the key adapter from the motor shaft to the key entrance hole
I know that someone has done that already. If you look on the make you maybe able to that person and ask directly how he has done it.

dvjaureliohdez
dvjaureliohdez

Interesting models but if they don't include the engine parts, I'm not interested. If we are paying for the model, we should include it and not tell the client to design it.
stevemeister2
stevemeister2

Could you design this to be motorized instead of hand-cranked?

  • 1 like
fulv
fulv

Hello,
You can add the motor on the outside
The only part you need to design is the key adapter from the motor shaft to the key entrance hole
I know that someone has done that already. If you look on the make you maybe able to that person and ask directly how he has done it.

TNTWS
TNTWS

Maybe I missed it, but I didn't see a make that was motorized.

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.