Skip to content
🐇

Hi naughty one! So you’d like to have fun with kinky 3D printed models?! You are right ;)

But on Cults, little bunnies have to prove they are grown up enough.

You must

Overwatch2 – DVA 1/10th and 1/6th Add-Ons by SPARX

Share
Add to
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
3D design format
2 files (ZIP) Close
  • NSFW1-10.zip
    • Full Models/FULL Toki Pose NUDE.stl
    • Full Models/FULL Victory BIKINI.stl
    • Full Models/FULL Victory BRA ONLY.stl
    • Full Models/FULL Victory NUDE.stl
    • Full Models/FULL Victory TOPLESS.stl
    • Head Stand BIKINI.stl
    • Head Stand TOPLESS.stl
    • No Armour cuts/Legs Bikini Btm.stl
    • No Armour cuts/Torso Bikini Top.stl
    • No Armour cuts/Torso Topless Top.stl
    • NUDE Btm n Shoes.stl
    • PILOT Shoes n NUDE.stl
    • Right Arm 4 Bra n Armour.stl
    • Right Arm TOPLESS 4 Toki.stl
    • Right Arm TOPLESS 4 Victory.stl
    • Torso Stand.stl
    • Upper BRA n Armour.stl
    • Upper TOPLESS n Armour 4 Toki.stl
    • Upper TOPLESS n Armour 4 Victory.stl
  • NSFW1-6.zip
    • Head Stand BIKINI.stl
    • Head Stand TOPLESS.stl
    • Lower NUDE torso.stl
    • No Armour cuts/Full BIKINITorso.stl
    • No Armour cuts/Full NUDE Torso.stl
    • No Armour cuts/Full TOPLESS Torso.stl
    • No Armour cuts/Left Arm for FULL Torso.stl
    • No Armour cuts/Right Arm for FULL Torso.stl
    • Right Arm 4 Bra n Armour.stl
    • Right Arm TOPLESS 4 Victory.stl
    • Torso Stand.stl
    • Upper BRA n Armour.stl
    • Upper TOPLESS n Armour 4 Victory.stl

Learn more about the formats
Publication date 2023-08-15 at 13:34
Design number 1387275
SparxBM

SparxBM

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

Now that the MEKA Toki is complete started on the figures at 1/10th scale to fit and pose around the MEKA.
I also sculpted and cut a 1/6th fully printable version of the model also included.
This has a lot of add-ons from Nude to partially covered . . for both scales as seen in images.

The parts are designed to interchange with the main of the model, this has no heads. Some parts to complete the model are also found in the main .

This is ONLY THE ADD ONS AND DOES NOT INCLUDE HEADS OR OTHER PARTS . . IT IS NOT A FULL MODEL.

All Print tested prior release. I will pics of completed painted model when I finish her . .

As previous the original model version is available to purchase separately and is used to create a model with these alternative parts.
https://cults3d.emulatorsite.com/en/3d-model/art/overwatch2-dva-1-10th-and-1-6th-scale-by-sparx

Toki Model here
https://cults3d.emulatorsite.com/en/3d-model/art/toki-articulated-meka-by-sparx

The Torso’s and Head parts are removable and interchangeable with magnets (see pics)

Model 1/6th scale 346mm Height.
Model 1/10th scale 225mm Height.

I have zipped the parts into 2 main categories;
NSFW1-6.zip
Contains 13 parts.
NSFW1-10.zip
Contains 19 parts.
Using 7Zip.

I have done this to keep apart to ensure you don’t make mistakes!

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?
1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less s than one larger part on FDM printers
So now you know!
Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D printing settings

3D PRINTING SETTINGS

Resin 1/10 scale
just be aware of hollowing too much!
I found upper torso’s wall at 3.60 to stop arms hollowing.
Lower torso’s at 3.30 to stop shoes hollow and ankles solid . .
Separate arms print solid

Resin 1/6 scale
All at 2.60 thickness apart from separate arms .
Arms leave solid

FDM
All parts in Cura printed well
Arms and heads 60% fill 0.12 speed 40
Rest at 0.16 30% fill, speed 50

Categories

People NSFW

Tags

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.