🌿Self Watering Planter, Smart automatic watering flower pot, lazy flower pot automatic siphon, adjustable water level, root ventilation

📺Instruction Video
https://youtu.be/Vf1VRHKvE-Y

🌿 Smart Self-Watering Planter | Automatic Siphon & Anti-Mosquito Design
Tired of overwatering or underwatering your plants? Meet your ultimate gardening assistant—the Smart Self-Watering Planter! Designed with convenience and efficiency in mind, this innovative planter automatically maintains the perfect water level using the ingenious Pythagorean siphon principle.

🌟 Key Features:
Automatic Water-Level Control:
Utilizes an integrated siphon system to effortlessly manage excess water, ensuring optimal moisture and preventing root rot.

360° Mosquito Protection:
Built-in mosquito guard keeps pesky insects away, making it ideal for indoor and outdoor environments.

Adjustable Soil-Water :
Easily adjust the internal height with a threaded pot to precisely control soil moisture and suit different plant varieties.

Root Ventilation & Thermal Insulation:
Unique 45° angled air vents enhance airflow to roots while preventing soil leakage, combined with dual-layer insulation to regulate root temperature.

Modular & Expandable Design:
Optional upgrades such as the enhanced mosquito shield siphon module, root breather module, medicine compartment module, algae inhibition module, and creative bases such as the stylish starship-shaped base allow you to customize your pot.

🌱 Optimal Potting Mix Recommendation:
50% Potting Soil
20% Perlite
20% Vermiculite
5% Slow-Release Fertilizer (Osmocote)
<1% Imidacloprid Granules (optional pest protection)

Perfect for both novice and experienced gardeners, this smart planter combines elegance, practicality, and cutting-edge gardening technology.

💧 Lazy Planter Water Level Adjustment Guide
(Rotate the breathable basin from the lowest position upward)

Plant Type Water Preference Recommended Turns Notes
🌱 Seedlings / Sprouts Very High 0.5 – 1 turn Require steady moisture for root development.
🌿 Herbs (Basil, Mint) Medium-High 1 – 1.5 turns Keep soil consistently moist.
🪻 Peace Lily / Pothos Medium 1 – 1.5 turns Slight drying between watering is okay.
🌼 Flowering Plants Medium 1 – 1.5 turns E.g., Petunia, Geraniums, Marigolds.
🧅 Green Onion / Garlic Medium 1 – 1.5 turns Prefer moderate moisture and drainage.
🌴 Indoor Palms Medium-Low 1.5 – 2 turns Avoid waterlogged roots.
🌾 Ornamental Grasses Medium-Low 1.5 – 2 turns Thrive in slightly drier soil.
🍓 Strawberries / Tomatoes Medium-High 1 – 1.5 turns More water needed during fruiting.
🪴 Ferns / Calatheas High 0.5 – 1 turn Require consistently moist soil.
🌵 Succulents & Cacti Very Low 2 – 3 turns Prefer dry soil and high drainage.

🚀 a more powerful super flowerpot:
https://cults3d.emulatorsite.com/:2953015

👉 , print, and upgrade your gardening experience today!
🔗 Follow me on Cults3D for more innovative designs!

🌿 智能自动浇水花盆 | 自动虹吸防蚊设计
还在为植物浇水过多或过少而烦恼吗？来认识一下您的终极园艺助手——智能自动浇水花盆吧！这款创新花盆的设计兼顾便捷性和效率，运用巧妙的毕达哥拉斯虹吸原理，自动保持理想水位。

🌟 主要特点：
自动水位控制：
采用集成虹吸系统，轻松管理多余水分，确保最佳湿度并防止根部腐烂。

360°防蚊：
内置防蚊装置，有效阻挡害虫，是室内外环境的理想选择。

可调节土壤-水接触面：
使用螺纹花盆轻松调节内部高度，精确控制土壤湿度，适合不同植物品种。

根部通风与隔热：
独特的 45° 角通风口可增强根部空气流通，同时防止土壤渗漏，并结合双层隔热层，有效调节根部温度。

模块化可扩展设计：
可选升级配置，例如增强型防蚊罩虹吸模块、根部透气模块、药品仓模块、藻类抑制模块以及时尚的星舰造型底座等创意底座，可定制您的花盆。

🌱 最佳盆栽混合料推荐：
50% 盆栽土
20% 珍珠岩
20% 蛭石
5% 缓释肥（奥绿肥）
<1% 吡虫啉颗粒（可选防虫）

💧 懒人花盆水位调节指南
（将透气盆从最低位置向上旋转）

植物类型 水分偏好 建议浇水次数 备注
🌱 幼苗/芽苗 极高 0.5 - 1 圈 需要稳定的水分以促进根系发育。
🌿 香草（罗勒、薄荷） 中高 1 - 1.5 圈 保持土壤持续湿润。
🪻 和平百合/绿萝 中高 1 - 1.5 圈 两次浇水之间略微干燥即可。
🌼 开花植物 中高 1 - 1.5 圈 例如：矮牵牛、天竺葵、万寿菊。
🧅 葱/大蒜 中高 1 - 1.5 圈 需要适度的水分和排水。
🌴 室内棕榈 中低 1.5 - 2 圈 避免根部积水。
🌾 观赏草 中低 1.5 - 2 圈 在略干燥的土壤中茁壮成长。
🍓 草莓/西红柿 中高 1 - 1.5 圈 结果期间需要更多水。
🪴 蕨类植物/竹芋 高 0.5 - 1 圈 需要持续湿润的土壤。
🌵 多肉植物和仙人掌 非常低 2 - 3 圈 喜欢干燥的土壤和良好的排水性。

这款智能花盆集优雅、实用和尖端园艺技术于一身，是新手和经验丰富的园艺爱好者的理想之选。

🚀升级更为强大的花盆功能配件
https://cults3d.emulatorsite.com/:2953015

👉 立即下载、打印，升级您的园艺体验！
🔗 在 Cults3D 上关注我，了解更多创新设计！

fdm optimized easy-to-print design
Recommended to use PETG material for good outdoor tolerance
Layer height (resolution): 0.12-0.28 mm
Print flow: base 100%, other accessories 95%
Temperature: PETG 255°C (recommended); PLA 210 ℃; ASA 250℃
Hot bed temperature: PETG 70°C (recommended); PLA 50 ℃; ASA 100℃
: No
Base: No
Filling material: base >30%, other accessories 15%
Speed: 50 mm/s

fdm优化易打印设计
建议使用PETG 材料打印户外耐受性能良好
层高（分辨率）：0.12-0.28 mm
打印流量：基座100%，其他配件95%
温度： PETG 255°C（建议） ；PLA 210 ℃ ； ASA 250℃
热床温度：PETG 70°C（建议） ；PLA 50 ℃ ； ASA 100℃
支撑：否
底板：否
填充物料：基础>30%，其他配件15 %
速度：50 mm/s