Table Lamp With Modular Illuminated Storage - Bedside Lamp

Modular Table or Bedside Lamp With Illuminated Storage - CX68 Tatemono

Assembled Dimensions (3 components plus lid): 152 x 76 x 325 mm

A simple, convenient, modular/expandable lamp. It features an illuminated storage for your nighttime needs.

• Print additional containers to make it taller or add storage.
• The base serves as storage for extra cable.
• It will fit most large and small lamp holders (E26, E27, E12, E14, E17), thanks to the provided adapter.
• Requires an electrical cord set with switch (IKEA Strala or similar).
• Use an LED lightbulb (7W Max) or other energy-efficient, low-heat lightbulb.

This is a set of components from the Infinite Containers 68 Series, where you will find additional sizes, shapes, and accessories. You can use this conveniently pre-assembled set, or build your own set from other components in the collection.

This set includes the following components:
BASE: Slotted Container CX68-85-SB (152 x 76 x 89 mm)
SHADE: Pierced Container CX68-180-P (152 x 76 x184 mm)
STORAGE: Container CX68-45 (152 x 76 x 49 mm)
COVER: Lid LX68-D (152 x 76 x 14 mm)

Objects in the photographs were printed on a standard desktop 3D printer without secondary operations. The stripes in some pics were produced by switching materials during printing.

WARNING: This stuff can get addictive, please print responsibly. Always print as many as you need, but never more than you need.

---

Infinite Containers is a 3D printable modular system of stackable containers, lids, and related accessories. It includes thousands of components you can combine endlessly to create simple and elegant objects for home decor. From desk organizers to kitchen and bathroom accessories, lamps, flower vases, and planters, the possibilities are limited only by your imagination. Look for examples in our collections

• Dimensions: The first three digits of the item’s code represent the series number and the container’s inner diameter in mm. Components from the same series fit together, stack, and rotate on top of each other. The second set of digits indicates the height of the stacked container (excluding the 4mm nesting base).

• Scaling: Scale UP for customization. Scaling down may cause fitting issues.

Learn more about Infinite Containers.

---

Printable Objects designs simple, elegant, and sustainable home decor for 3D Printing. Our thoughtfully crafted solutions are easy to customize and print, empowering you to easily create beautiful, practical objects affordably and with less waste. We make high-quality design more accessible than ever through the power of digital distribution and 3D printing. Find out more at printableobjects.com

Follow Printable Objects on Instagram for the latest ideas in 3D printed home decor: @printable_objects

---

Largest required build volume: 152 x 76 x184 mm

Scalable: NO
Nozzle: 0.4 mm
Layer Height: 0.2 mm
Tested with: PLA
s: Yes
Surface texture: 0.2-0.2 fuzzy skin
Infill for the base and additional non-transparent components: 15% Gyroid (recommended)

FOR TRANSPARENCY: Use a transparent/translucent material (PLA). You can use a low % infill (7-10%) of your choice to create a pattern inside the lampshade or follow the instructions below for a hollow container (double diff).

• Shade with stripes: 9% lightning infill (s at the bottom and top only, as shown in the pics). To hide the s at the top and bottom, it needs an opaque material alternated with the clear material (12mm stripes at the top and bottom of the lampshade in the pics)

• Shade without stripes (no material change): No infill (0%), with a modifier to add infill to the bottom only. The top rim of the lampshade does not need s.

• Container/lid with transparent bottom: we used a 10% Line infill to create the simple, random-looking pattern.

Feel free to ask any questions in the comments or via email.

---