Skip to content

WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK

pic.jpg WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
s-l1600-5.png WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
HHV2-Contemptor-Cyclone-Launcer-v1.png WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
s-l1600-2.png WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
s-l1600-3.png WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
s-l1600-1.png WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
s-l1600-3.png WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
s-l1600.png WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
Claw Hand MK2.stl WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
autocannon-full.stl WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
butcher-cannon-full.stl WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
c-beam-full.stl WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
Cyclone Missle Launcher.stl WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
heavy-bolter-body-full.stl WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
kheres-assault-cannon-full.stl WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
toxin-cannon-full.stl WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
volkite culverin V3.stl WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
heavy-bolter-magazine-preed.stl WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
HH V2 Cyclone Launcher - ed.stl WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
HH V2 Cyclone Launcher.stl WEAPONS FOR CONTEMPTOUS ROBOT EASY-PRINT PACK
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (13 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
3D design format
14 files (RAR and STL) Close
  • Claw Hand MK2.stl
  • Cyclone Missle Launcher.stl
  • Entire weapon Pack.rar
  • HH V2 Cyclone Launcher - ed.stl
  • HH V2 Cyclone Launcher.stl
  • autocannon-full.stl
  • butcher-cannon-full.stl
  • c-beam-full.stl
  • contemptor weapons.rar
  • heavy-bolter-body-full.stl
  • heavy-bolter-magazine-preed.stl
  • kheres-assault-cannon-full.stl
  • toxin-cannon-full.stl
  • volkite culverin V3.stl

Learn more about the formats
Last update 2023-01-22 at 11:28
Publication date 2021-11-30 at 22:00
Design number 574516
Craftos

Craftos

Certified
Issue with this design? Report a problem.

15 comments

Add a comment

15 comments

Vellik
Vellik

A good number of the files seem to be corrupted and won't open in a slicer now -- for example, the ed version of the thin magnet connector and the ed version of the K.A. cannon
gundamvsff
gundamvsff

Just as an aside - the chainfist arm (both the arm itself and the one in all chainfist) do not fit with arm inside thin (magnet or otherwise) from the unknown legion contemptor bot pack. Scaling down won't work in this case because then the gears look tiny inside the arm.
OZYMANDIAS
OZYMANDIAS

Thank you so much!
Coolisron
Coolisron

Is there a claw AND a power fist? Or, is it just a sort of merged version?

Craftos
Craftos

yes inside the zip folder you have both a power fist and a lightning claw. they are modular and will allow you to have them however you want

  • 1 like
SynnerG
SynnerG

Any chance at getting the power claw with a magnet mount? Everything else has an elbow to accept a magnetized t except the claw...

  • 1 like
obtwpewpew
obtwpewpew

Is there a ed claw somewhere I'm missing? I did a turret from one of your other kits and it came out perfect! The ed weapons for this say they have structural errors when I put them in lychee, might just be the software. Still very new at this I it.

  • 1 like
dannyboi6310
dannyboi6310

Hi, I cant get these weapons to fit the AL STRONG AND POWERFUL CONTEMPTUOUS ROBOT shoulder sockets, these weapon connector sockets are too big

sacksbot
sacksbot

Is there an easy way to fit these with the shoulder mounts of the XX Robot? Doesn't seem to fit correctly.
Smurf_The_2nd
Smurf_The_2nd

Whenever i try to open any of the files in 3Dbuilder it just says "you do not have permission to open some of the selected files"

Craftos
Craftos

have you extrated them from the RAR first?
totallylegitbusinessperson
totallylegitbusinessperson

Don't suppose you have a file for the upper shoulder part for these fellas, wouldja? You have the elbow that connect the weapon itself and the lower shoulder and you have said lower shoulder [arm socket], but no upper shoulder part to slot it into.
ShiaLovekraft
ShiaLovekraft

Hey hey! I'm not sure if something's happened behind the scenes, but the doesn't contain all the weapon options pictured. It only has the options listed under "Folder Details" in 3D PRINTER FILE INFORMATION further down the page. Amazing s, regardless!

Craftos
Craftos

have you looked in the "Entire weapons pack.zip"?

ShiaLovekraft
ShiaLovekraft

Christ, I'm losing my mind - I swear I did. Thank you!
Procopius
Procopius

This is such an amazing release. Thank you so much! One request: if it's not a burden, at some point could the connector for the ed version of the Volkite Culverin be made magnet-friendly or left off so a magnet-ready one could be attached after printing?
Tlactar
Tlactar

Thanks!

Just a hint: Top of the C-Beam looks a bit weird, i think some s went astray ^^
m3mr3g
m3mr3g

Is there any ed version of the claw? Extracted everything, but can't find it.
shippo
shippo

The entire weapon pack.rar wont open. Tried winzip, winrar and 7zip, noe work, says not a valid .rar file

Craftos
Craftos

i just ed it and it works fine for me, have you ed the most recent pack as there was a problem earlier on with the zip folder.

let me know how you go

  • 1 like
shippo
shippo

I ed a new file extractor, BreeZip, woked great. Thanks mate!
roarkrjr
roarkrjr

Hey, I don't see all of the files in the zip, not sure if the problem is on my end though.

Craftos
Craftos

All sorted, the zip file didnt correctly

roarkrjr
roarkrjr

Ah, thanks!

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.