"Modyulox" Freestyle Interlocking Modular Structure Diorama Playset Builder: Basic Set

https://www.youtube.com/watch?v=0pN0EWbgOyE&t=22s

"Modyulox" Freestyle Interlocking Modular Structure Diorama Playset Builder. 3d printed expansive 1/18th scale diorama structure scene building system for your 3.75" action figures

Print as many modules in any color as you want and scale up your build to your imagination's specification. Experience building construction and engineering in 1/18 scale. Make your own scenic shelf diorama display to showcase your 1/18 collection. Combine with other scale props and create your own armory, Med Lab, Mecha bay, Holding cell, Supply room, control room, garage, lockers and loo, private quarters, outpost, meeting area, etc., etc, etc.. Also look foward to expansion sets and accessories to build more unique setups.

Provided you have all the basic parts, use the TPU pegs to attach structural to each other makes building pretty intuitive and straight forward. Being modular by design, construct and knock down to any layout imaginable. Anything goes so there is no particular instructions. Unlimited possibilities.

Basic Set package parts list:

1. Baseplates/ Slab: Use the TPU plate connectors to combine the plates to be used as flooring, reinforce attachments with TPU pegs horizontally inserted to the horizontal peg holes

   • Whole: baseplate.stl
   • Half: baseplateHalf.stl
   • Quarter: baseplateQtr.stl

2. Columns- Reorient and combine these vertical pieces to attain the desired shape. Use TPU pegs to parts together

   • Whole: Column.stl
   • Half vertical: ColumnHalfVert.stl
   • Quarter Vertical: ColumnQuarterVert.stl
   • Half horizontal half: ColumnHalfHorizontalHalf.stl
   • half horizontal quarter: ColumnHalfHorizontalQuarter.stl

3. Walls- Printable 3d wall s or optional 2d desktop printer printed wall graphics on cardstock glued/mounted on 2.5mm thick board to be cut to size and flanged between columns to be used as partitions

   • Whole Wall 1: 3dWal1.stl
   • Half Wall 1: 3dWall1Half.stl
   • Whole Wall 2: 3dWall2.stl
   • Half Wall 2: 3dWall2Half.stl
   • 2d printable wall s: see 2d graphics folder- Walls.jpg

4. Vertical access- some assembly required prior to use- See guide JPGs in the "ModulePics" folder

   • Straight Stairs: Staircase.stl
   • Ladder: ladder.stl

5. Connectors- TPU printed connectors used to lock the different modules together

   • Peg Connector: TPUPegConnector.stl
   • Plate connector 4x: TPUPlateConnector4x.stl
   • Plate connector 2x: TPUPlateConnector2x.stl
   • Plate connector 1x: TPUPlateConnector1x.stl

6. Beams - used as baseplate/ slab edging or slab end connectors or height extender. Connect using peg connector

   • Whole beam: beamsWhole.stl
   • Half Beam: beamsHalf.stl
   • L- Beam: beamsLshape.stl
   • 2 hole block: beams2HoleBlock.stl
   • 1 hole block: beams1HoleBlock.stl

7. Railings - Used as edge barriers to prevent figures from falling off from upper floors, can also be used to divided spaces in lieu of a wall. Flanged between column modules via the 3mm socket and guide slot

   • Whole Plate Width: railingsWhole.stl
     
   • Half Plate width: railingsHalf.stl

8. Others

   • Hook Cornice - Can be used as a cantilever slab or decorative detail: accentHook.stl
   • Railing Graphics decorative - 2d desktop printer printed graphics cut to size and folded to shape to be slotted in the railing slits as decorative s - See 2d graphics folder- RailingGraphics.jpg
   • Wall s - 2d desktop printer printed wall graphics cut to size and mount on cardstock of appropriate thickness, mount back to back for double sided graphics wall ; use as wall s in lieu of the 3d printed wall s which take time to 3d print. Aslo give a nice animated look. - See 2d graphics folder- Walls.jpg

Watch out for expansion sets!

You are licensed to sell prints! Please read the DSMO lisence included in this package. It's basically the same with Cults3d commercial license but more personalized coming from RepapStudios (www.facebook.com/repapstudios).

!!!IMPORTANT!!! - You must be able to print the pegs in TPU . They provide good holding strenth for parts to be ed with each other but can still be able to be taken apart.

3d Print Guide:
- If models appear tiny in the slicer buildplate, adjust the scale to 1000% to print in the correct 1/18 scale.
- I printed my modules with PLA at .28mm - .32mm layer height 2 wall perimeters, 12% infill to speed things up. However, you can also use 3-4 wall perimeters and 15% infill for a sturdier output at the cost of more matertial and print time.
- The TPU connectors are printed solid with 100% infill or all wall perimeters throughout.

FOR 1/12 Classified scale use 1650% print scale. The biggest part barely fits most printers. Printing at a bigger scale will also exponentially add to the print times but your patience will be rewarded.