This is my complete edition of the H/V Signal-type series.
Scale is 1to 45 or Gauge 0.
All Signals could be illuminated, these are the needed LEDs (and for every one you would need and resistor corresponding your LED and the operation voltage):
Blocking signal high DB Sperrsignal hoch
2x LED 2mm in white
2x LED 2mm in red
Blocking signal low DB Sperrsignal nieder
2x LED 2mm in white
2x LED 2mm in red
Blocksignal
1x 4mm LED in green
1x 4mm LED in red
3x LED SMD0805 in white
Blocksignal with distant signal DB Blocksignal mit Vorsignal
3x 4mm LED in green
2x 4mm LED in yellow
1x 4mm LED in red
3x LED SMD0805 in white
Combined exit signal DB Kombiniertes ausfahrsignal
1x 4mm LED in green
1x 4mm LED in yellow
1x 4mm LED in red
2x LED SMD0805 in red (or 1.8mm)
5x LED SMD0805 in white (or 3x SMD0805 and 2x1.8mm)
Combined exit signal with distant signal DB Kombiniertes ausfahrsignal mit Vorsignal
3x 4mm LED in green
3x 4mm LED in yellow
1x 4mm LED in red
2x LED SMD0805 in red (or 1.8mm)
5x LED SMD0805 in white (or 3x SMD0805 and 2x1.8mm)
Distant signal DB Vorsignal
2x 4mm LED in green
2x 4mm LED in yellow
Distant signal with indicator light DB Vorsignal mit Kennlicht
2x 4mm LED in green
2x 4mm LED in yellow
1x 4mm LED in white
Entry signal DB Einfahrsignal
1x 4mm LED in green
1x 4mm LED in yellow
1x 4mm LED in red
3x LED SMD0805 in white
Entry signal with blocking signal DB Einfahrsignal mit Sperrsignal
1x 4mm LED in green
1x 4mm LED in yellow
1x 4mm LED in red
2x LED SMD0805 in red (or 1.8mm)
5x LED SMD0805 in white (or 3x SMD0805 and 2x1.8mm)
Entry signal with distant signal DB Einfahrsignal mit Vorsignal
3x 4mm LED in green
3x 4mm LED in yellow
1x 4mm LED in red
3x LED SMD0805 in white
Exit signal DB Ausfahrsignal
1x 4mm LED in green
1x 4mm LED in yellow
2x 4mm LED in red
3x LED SMD0805 in white
Exit signal with blocking signal DB Ausfahrsignal mit Sperrsignal
1x 4mm LED in green
1x 4mm LED in yellow
2x 4mm LED in red
2x LED SMD0805 in red
5x LED SMD0805 in white
Exit signal with distant signal DB Ausfahrsignal mit Vorsignal
3x 4mm LED in green
3x 4mm LED in yellow
2x 4mm LED in red
3x LED SMD0805 in white
Railroadcrossing flashlight DB Bahnübergangsblinklicht
1x 4mm LED in white
For each LED is a suitable Resistor needed, depending on the Voltage/Current Rating and your Powersupply.
For the installation to the layout you need a small piece of a 10mm Pipe.
I added a sheet of the signs for the Signalposts I just print them on semigloss photopaper and direct glue them with PVA to the post. Only the Distant signal sign (black “X”) I glue on the added 3d print . I will try to update it from time to time but if you need a special one I haven’t added yet just write me after you bought it and I will add it as soon as possible. For example Speed announcement signs
Private use only.
ing on and selling the 3D data or printed models is prohibited!
If you have any questions write me and I will answer as soon as possible. I would be happy if you rate the Model.
Check out my other Models of the signals or railway addons like cable channels.