Toxic V Electric Guitar Flying Rhoads

UPDATE I've just created a Discord server for any chat or help you may need with this build! Head on over! https://discord.gg/wznhkDrwMc

This model kicked my butt so many times when I initially tried to model. I've made a total of 5 Rhoads V bodies before finally settling on this design and all I can say is that I F'ing love it!

I gave the design a little bit of an update with some curves, I wanted it to stay true to the original, but also... Have my unique twist on it.

Without a doubt I was listening to a lot of Exodus when deg this thing... In particular The Toxic Waltz which absolutely contributed to the name and colour scheme!

What you're going to need is the following...

22Fret 25.5" scale neck... Jackston/Ibanez style. Neck pocket width is designed for upto 57mm. Included in the files is a neck shim with a 1.5degree neck break angle to help compensate for any variations in depth.
This is the exact neck that I used.
https://www.ebay.com.au/itm/203227454028

If you have any questions about whether a specific neck will fit or need the files modified to suit your existing neck... let me know! I respond pretty quickly and we can take some measurements to ensure it fits.

You'll also need a pair of humbucker pickups. I've included a pickup cover and matching mounting ring to suit open humbuckers if you want it to match similar to mine.

The bridge is your typical Tune-O-Matic without the tail piece.
https://www.ebay.com.au/itm/203227454028

You'll need a total of 12 1/4" string ferrules. They usually come in packs of 6. https://www.ebay.com/itm/225739773028

Guitar tuners to suit your neck. I'm a big fan of locking tuners, but it's totally up to you.

Wiring is pretty simple when you use a premade harness like this one! https://www.ebay.com/itm/126261918926

The input jack... same as I always use ;) I just like it, ok? lol
https://www.ebay.com/itm/262484568625

Strap pins, You'll want to use one of the neck screws for the front pin. https://www.ebay.com/itm/375470157903

Don't forget those controls need knobs! You can a file from somewhere, or grab a pair of these!
https://www.ebay.com/itm/252641199004

You'll need one of these to hold the neck in place! Psst, don't forget to pre-drill the neck eh?
https://www.ebay.com/itm/145156638946?

As always, my glue of choice is SciGrip WeldOn 16

You'll need 1.8kgs of your favourite filament for the body. ABS, PLA... whatever the hell you like, we're going to print this so damn thick and heavy that I wouldn't be surprised if you could use TPU (Don't blame me if you use TPU and it plays like a wet noodle!) You'll also a little bit of your accent colour of choice. Silk goes REALLY well in this instance.

Central Core
2.4mm Walls
1.8mm Top and Bottom
25% Gyroid infill

Front Veneer
2.4mm Walls
1.8mm Top and bottom
25% Gyroid infill

Back Veneer
2.4mm Walls
1.8mm Top and Bottom
15% Gyroid infill

Trim pieces
1.8mm Walls
1.8mm Top and bottom
15% Gyroid infill
Print this slow... under 100mm/s
.1mm layer height or less.