Skip to content

Camera mount for Target Corona Vision, darts autoscoring without drilling, autodarts with OV9732
IMG_2581.jpg Camera mount for Target Corona Vision, darts autoscoring without drilling, autodarts with OV9732
IMG_2582.jpg Camera mount for Target Corona Vision, darts autoscoring without drilling, autodarts with OV9732
IMG_2585.jpg Camera mount for Target Corona Vision, darts autoscoring without drilling, autodarts with OV9732
IMG_2586.jpg Camera mount for Target Corona Vision, darts autoscoring without drilling, autodarts with OV9732
IMG_2589.jpg Camera mount for Target Corona Vision, darts autoscoring without drilling, autodarts with OV9732
IMG_2596.jpg Camera mount for Target Corona Vision, darts autoscoring without drilling, autodarts with OV9732
IMG_2597.jpg Camera mount for Target Corona Vision, darts autoscoring without drilling, autodarts with OV9732
AD.jpg Camera mount for Target Corona Vision, darts autoscoring without drilling, autodarts with OV9732
Druckplatte.jpg Camera mount for Target Corona Vision, darts autoscoring without drilling, autodarts with OV9732
HBV.jpg Camera mount for Target Corona Vision, darts autoscoring without drilling, autodarts with OV9732
Halter.stl Camera mount for Target Corona Vision, darts autoscoring without drilling, autodarts with OV9732
Deckel.stl Camera mount for Target Corona Vision, darts autoscoring without drilling, autodarts with OV9732
Deckel DECXIM.stl Camera mount for Target Corona Vision, darts autoscoring without drilling, autodarts with OV9732
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (2 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
7 files (3MF and STL) Close
  • Deckel DECXIM.3mf
  • Deckel DECXIM.stl
  • Deckel.3mf
  • Deckel.stl
  • Druckplatte.gcode.3mf
  • Halter.3mf
  • Halter.stl

Learn more about the formats
Last update 2025-05-13 at 16:29
Publication date 2025-03-29 at 20:20
Design number 2864595
ClicknScore

ClicknScore

Issue with this design? Report a problem.

7 comments

Add a comment

7 comments

dodomat
dodomat

Hi, can i use it also with myTarget Omni system ?
Niklas1234
Niklas1234

Wie bekommt man die Dinger wieder ab? Hab eins platziert um zu schauen wie es hebt und das ist echt bombenfest, starke Leistung! Nur hab ich es jetzt an eine Stelle hingehΓ€ngt wo ich es eig nicht habe will… :D wie bekomm ich das Teil am besten ab ohne kaputt zu machen?

ClicknScore
ClicknScore

Hi, an der Befestigung am Ring an der Oberseite mit vier Fingern ziehen und zu dir klappen. Man benΓΆtigt etwas Kraft in den Fingern. Ich habe dabei aber auch noch keins kaputt bekommen. Sind sehr robust. Wenn es gar nicht klappt mache ich noch ein Video dazu.

Niklas1234
Niklas1234

Danke, kΓΆnntest du eventuell ein Video hochladen? Ich hab’s versucht und dabei fast mein Corona Target Licht kaputt gemacht β€’_β€’

mainimum
mainimum

Ich habe leider das gleiche "Problem" und krieg die Dinger nicht mehr ab. KΓΆnntest du echt ein kurzes Video dazu machen? Das wΓ€re super :)
gkleinhorsman
gkleinhorsman

Doesnt fit with my corona target vision. Please me

ClicknScore
ClicknScore

Hi, have you checked the installation video on Youtube? Please share a picture for better understandung of the issue. Did you change any proportions? I have printed this ring several times for myself, darts team and friends and it fits perferctly with our rings.

gkleinhorsman
gkleinhorsman

I don’t have change any proportions. the bottom clip is too long for me. I can't get it around the ring without breaking it badly. now I manually cut the bottom clip away a bit and made it shorter. Now I can click it around. Tried based on the video instruction.
Brodiehimself
Brodiehimself

Greatly appreciate the V2, much better design imo both in stability and looks. Thanks.

  • 1 like
ClicknScore
ClicknScore

Thanks a lot for your :) My amateur darts team also loves it. We play every week and have reached a hit ratio of 99,6% at Autodarts this week with the new design. Please let me know your ratio after a few days.
bjoebu
bjoebu

Was fΓΌr Material sollte ich am besten zum drucken nehmen? Infill?

ClicknScore
ClicknScore

Hi, ich drucke PLA+ mit 15% infill.

  • 1 like
nickjay3
nickjay3

When I detach the s some of the sides of the main camera housing snap as they are so thin. Is there a way to increase the strength of these?

ClicknScore
ClicknScore

Hi, thanks for the . I've already created a version with stronger walls and moved the threads to the lid for easier printing and installation. I will the model after testing next week. Also I removed all sharp corners and rounded up the edges of the lid. Looks way more pretty to me now. Hope you guys enjoy and please let me know if something else bothers you or should be improved.

My amateur darts team is playing every week and everybody is excited about how good this is working out. Please let me know the hit ratio you get with your autoscoring software.

I'm so happy this model has been ed so many times by now. Thanks to all of you!

nickjay3
nickjay3

Sounds good, I’m happy to test them as well if you want

nickjay3
nickjay3

Also I'd suggest making a version where the screw holes are slightly wider and deeper to melting threaded inserts into them. At .20mm layer height (0.6mm nozzle) the screws holes dont work

nickjay3
nickjay3

And perhaps increase the height of the back cover by a few mm. With the GXIVision cameras the back cover doesn’t sit flush

ClicknScore
ClicknScore

Got it. I will an improved version by end of this week latest. Thanks a lot for your .

ClicknScore
ClicknScore

Hi, V2 is ed. Would love to hear what you think about it.
uyondo
uyondo

Hey kannst du die gleiche Halterung fΓΌr Cyeelife erstellen ?

ClicknScore
ClicknScore

Hey, ich versuche es gerne. Melde mich, wenn ich erfolgreich war. Kann aber eine gute Woche dauern.

  • 1 like

Page translated by automatic translation. See the original version.

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.