Skip to content

BASH JET

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (2 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
2 files (ZIP) Close
  • BASH JET.zip
    • CAGE/CAGE CENTER BAR.stl
    • CAGE/CAGE SIDE BARS.stl
    • CAGE/CAGE X BAR.stl
    • CAGE/CAP BRACKETS.stl
    • CAGE/CAP.stl
    • CAGE/NO ROOF PIECE.stl
    • CAGE/ROOF.stl
    • CAGE/WINDO.stl
    • EXTRAS/5X10X5 BEARING ADAPTER_.stl
    • EXTRAS/5x5 DUMMY COUPLER 5,2 ID.stl
    • EXTRAS/5x5 DUMMY COUPLER 5,3 ID.stl
    • EXTRAS/BOATSTAND/BOAT STAND 0.3MM GAP.stl
    • EXTRAS/BOATSTAND/BOAT STAND TEST PRINT.stl
    • EXTRAS/BOATSTAND/BOAT STAND.stl
    • EXTRAS/CURVED LEDBAR/BRACKET AND ENDCAPS.stl
    • EXTRAS/CURVED LEDBAR/ENDS.stl
    • EXTRAS/CURVED LEDBAR/GLASS STENCIL.stl
    • EXTRAS/CURVED LEDBAR/INSTRUCTIONS.txt
    • EXTRAS/CURVED LEDBAR/LEDBAR.stl
    • EXTRAS/FLAG MOUNT DRILL TO FIT YOUR POLE DIM.stl
    • EXTRAS/HD GRATE.stl
    • EXTRAS/m-jet-35 STEERING AND DRIVESHAFT JIG.3mf
    • EXTRAS/TURNFINS/TURNFIN MOUNTS.stl
    • EXTRAS/TURNFINS/TURNFINS 10MM.stl
    • EXTRAS/TURNFINS/TURNFINS 7MM.stl
    • FOAM DETAIL/FOAM FLOR AND WALL.stl
    • FOAM DETAIL/FOAME DECK.stl
    • FOAM DETAIL/FOAME FRONT.stl
    • FOAM DETAIL/FOAME LID.stl
    • FOAM DETAIL/FOAME SIDE.stl
    • HULL/HULL TEST PRINT.stl
    • HULL/LID/LID SEAL.jfif
    • HULL/LID/LID.stl
    • HULL/LID/LOCK.stl
    • HULL/MAIN/DECK.stl
    • HULL/MAIN/HULL 1 M-Jet 30.stl
    • HULL/MAIN/HULL 1 M-Jet 35.stl
    • HULL/MAIN/HULL 2.stl
    • HULL/MAIN/HULL 3 KEY.stl
    • HULL/MAIN/HULL 3.stl
    • HULL/MAIN/HULL 4 BRAKE OF TABS FOR BED ADHESION.stl
    • HULL/MAIN/HULL 4.stl
    • HULL/MAIN/NOSE 1.stl
    • HULL/MAIN/NOSE 2.stl
    • HULL/PARTS/BAT TRAY EXTRA STIF.stl
    • HULL/PARTS/BAT TRAY.stl
    • HULL/PARTS/BATT TRAY CLIP.stl
    • HULL/PARTS/BATTERY TRAY OPTIONS/BATTERY CLIP 92MM MOTOR.stl
    • HULL/PARTS/BATTERY TRAY OPTIONS/BATTERY TRAY 74MM MOTOR.stl
    • HULL/PARTS/BATTERY TRAY OPTIONS/BATTERY TRAY 92MM MOTOR.stl
    • HULL/PARTS/BATTERY TRAY OPTIONS/BATTERY TRAY EXTRA STIF 74MM MOTOR.stl
    • HULL/PARTS/BATTERY TRAY OPTIONS/BATTERY TRAY EXTRA STIF 92MM MOTOR.stl
    • HULL/PARTS/ESC PLATE.stl
    • HULL/PARTS/RX BOX LID.stl
    • HULL/PARTS/RX BOX SEAL.jfif
    • HULL/PARTS/RX BOX.stl
    • HULL/PARTS/RX NEST LOWERED.stl
    • HULL/PARTS/RX NEST MOUNT.stl
    • HULL/PARTS/RX NEST.stl
    • HULL/TRIMFLAP/ADJUSTABLE/ADJUSTERS HEAT INSERT.stl
    • HULL/TRIMFLAP/ADJUSTABLE/ADJUSTERS NUT.stl
    • HULL/TRIMFLAP/ADJUSTABLE/TRIMFLAP HOLE STENCIL.stl
    • HULL/TRIMFLAP/ADJUSTABLE/TRIMFLAP MAIN.stl
    • HULL/TRIMFLAP/HD FIXED/+3/BAR +3.stl
    • HULL/TRIMFLAP/HD FIXED/+3/HD FLAPS +3.stl
    • HULL/TRIMFLAP/HD FIXED/-3/BAR -3.stl
    • HULL/TRIMFLAP/HD FIXED/-3/HD FLAPS -3.stl
    • HULL/TRIMFLAP/HD FIXED/MOUNT + 3mm.stl
    • HULL/TRIMFLAP/HD FIXED/MOUNT + 5mm.stl
    • HULL/TRIMFLAP/HD FIXED/MOUNT.stl
    • HULL/TRIMFLAP/HD FIXED/STOCK/BAR STOCK.stl
    • HULL/TRIMFLAP/HD FIXED/STOCK/HD FLAPS STOCK.stl
    • INTERIA/CENTER CONSOLE/CONSOLE DETAILS.stl
    • INTERIA/CENTER CONSOLE/CONSOLE.stl
    • INTERIA/DASH/DASCH SCREW COVER.stl
    • INTERIA/DASH/DASH DETAILS.stl
    • INTERIA/DASH/DASH.stl
    • INTERIA/DASH/STEERINGWHEEL BASE.stl
    • INTERIA/DASH/STEERINGWHEEL.stl
    • INTERIA/SEAT/SCREW COVER.stl
    • INTERIA/SEAT/SEAT BASE.stl
    • INTERIA/SEAT/SEAT.stl
    • MODEL TO PAINT/BASH JET.3mf
    • READ ME FIRST.txt
    • TOLARENS TEST.stl
  • FREE GIFT.zip
    • DUMMY WOOFER/PARTS/1 BASKET.stl
    • DUMMY WOOFER/PARTS/10 CONE.stl
    • DUMMY WOOFER/PARTS/10.1 VD CONE.stl
    • DUMMY WOOFER/PARTS/11 MOUNT RING.stl
    • DUMMY WOOFER/PARTS/12 SURRUND.stl
    • DUMMY WOOFER/PARTS/13 SURRUUND GLUE PRES TOOL.stl
    • DUMMY WOOFER/PARTS/14 MAGNET CAP.stl
    • DUMMY WOOFER/PARTS/2 TERMINALS.stl
    • DUMMY WOOFER/PARTS/3 BASKET COIL RING.stl
    • DUMMY WOOFER/PARTS/4 SPIDER.stl
    • DUMMY WOOFER/PARTS/5 COIL ALIGMENT TOOL.stl
    • DUMMY WOOFER/PARTS/6 MAGNET BOTTOM.stl
    • DUMMY WOOFER/PARTS/7 MAGNET TOP.stl
    • DUMMY WOOFER/PARTS/8 MAGNET.stl
    • DUMMY WOOFER/PARTS/9 VOICE COIL.stl
    • READ ME.txt

Learn more about the formats
Last update 2024-10-20 at 13:07
Publication date 2024-07-13 at 17:50
Design number 2131830
VassaDesigns

VassaDesigns

Certified
Issue with this design? Report a problem.

11 comments

Add a comment

11 comments

pedrocaixinha
pedrocaixinha

Hi. For the roof.file did you use s? having some probs with this one. thanx

VassaDesigns
VassaDesigns

Hi. No needed for the roof.

pedrocaixinha
pedrocaixinha

ok; and it's printed both parts in that position that it loads? I'm using orca slicer. thank you

VassaDesigns
VassaDesigns

Yes. Orca is the best πŸ‘Œ
xure24rc
xure24rc

What configuration do you use for printing the stand? I've tried it twice and everything comes together and breaks when I try to unfold it.

VassaDesigns
VassaDesigns

Hi. What printer and slicer are you using? It has to be printed in the orientation it loaded in. Easter to help you on the FB group BTW.

xure24rc
xure24rc

Orca slicer ender 3 with sprite extrusor
Br0ckers
Br0ckers

Hi, Any recommendation on battery sizes running 6s setup with a 4074 1550kv motor?

Thanks

lynxnorth
lynxnorth

im running a 4074 1550kv with a 180a ESC and two 3s 5200mah

  • 2 likes
claytertot
claytertot

will the hull fit the updated m jet 30
Gsxrlindsey
Gsxrlindsey

I am having a 3 out of 4 failure rate on HULL3 part print. Is there a recommended setting for the lower angled overhang? Its a crap shoot whether it works or not on every print. Ive tried normal auto, manual normal and organic on my Bambu X1C. Ive3 gotten the manual organic to successfully (albeit very rough) print one time. Any help here would be awesome.

VassaDesigns
VassaDesigns

Wat filament are you using? Iv heard that the x1c/e has some driver problems when printing with high cabinet temp. I use cura on ender printers with no problem. Do a post in the FB group. As its a pretty comen printer.
enforcer504
enforcer504

i have ed and built but i do not see the TPU gasket for the lid. and info on this?

VassaDesigns
VassaDesigns

Thers no tpu gasket in the design. There is a sample picture of the intended seal.

  • 1 like
djshrew
djshrew

I made one: https://cults3d.emulatorsite.com/en/3d-model/gadget/bashjet-tpu-gasket

  • 2 likes
imjameskidd
imjameskidd

at $.63 why not just make it free

VassaDesigns
VassaDesigns

I feel that's up to the designer. Not all of us have a lot of spare time and some times might have spent precious time on deg. ✌️

djshrew
djshrew

Think Vassa provided an excellent answer, but if you’d prefer to buy the proper gasket kit, that’s entirely your choice. I’m not trying to pressure you, feel free to do as you see fit. After all, $0.63 is likely just the cost of a chocolate bar.

  • 1 like
brianmcgrawforchrist6
brianmcgrawforchrist6

Is it compatible with the M jet 30

  • 1 like
djshrew
djshrew

This hull is designed for the m-jet 35 and m-jet 30 pump, you didn't read??

  • 1 like
cherijean
cherijean

I ed the files when you accadently added the flood chamber. I would like to print that one I just wanted to make sure It is tested and working?

VassaDesigns
VassaDesigns

No wer stil working on it. Hold one. Youl get a email when its good to go.

carterflatness
carterflatness

Any word yet on flood chamber?

VassaDesigns
VassaDesigns

Sorry now. My test guy is falling behind. Hav you tested the current version?

carterflatness
carterflatness

any updates on flood chamber?

carterflatness
carterflatness

?
Gsxrlindsey
Gsxrlindsey

what filament do you recommend?

VassaDesigns
VassaDesigns

I recommend esun pla+
umpy
umpy

Is there a hardware and electronics kits to purchase for the bash jet?
SAW_Minion
SAW_Minion

Please add a Self Righting Feature πŸ‘πŸ€— Would be great!
Keep up your great work!

VassaDesigns
VassaDesigns

Its already implemented. Needs to be testes first. First "big update of the files will have it.

wilburlindyn
wilburlindyn

do you have a time estimate of when the big update will happen?

VassaDesigns
VassaDesigns

1-2 weeks 🀞

klemajan
klemajan

Hello Vassa. Any updates with the flood chamber? Thank you.

VassaDesigns
VassaDesigns

Not done yet. Hav you tested the boat? I honestly dont think its needed. And you'll hav better handling in the river. I'll try to roll mine next time im out. Seen my clip on jet hub?

klemajan
klemajan

Im just starting with printing the hull. I think also that the chamber is not needed. Thank you for response.

Autodetailer
Autodetailer

did the self righting feature get added yet??

VassaDesigns
VassaDesigns

Sorry no. Im in winter mode here so im only working on sleds. I had a testprinter for the fludhull but he is none responding It will be a while before im working on boats again. If you want to test it send me an pm.

  • 1 like
jacenoal
jacenoal

so does the pump body come with the files or is it purchased separately form these files

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.