Skip to content

Stick Toolkit sanding and polishing

Advertising
€ 5.40+
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
23 files (STL) Close
  • 1. FLAT L.stl
  • 10. FLAT 45 XS.stl
  • 11. ROUND 45 S.stl
  • 12. ROUND 45 XS.stl
  • 13. DISC D16.stl
  • 14. DISC D12.stl
  • 15. FOAM TEMP 1.stl
  • 16. FOAM TEMP 2.stl
  • 17. TEMP FLAT L-M.stl
  • 18. TEMP FLAT S-XS.stl
  • 19. TEMP ROUND M-S.stl
  • 2. FLAT M.stl
  • 20. TEMP FLAT45 L-M.stl
  • 21. TEMP FLAT45 S-XS.stl
  • 22. TEMP ROUND45 S-XS.stl
  • 23. STICK TOOLKIT BOX.stl
  • 3. FLAT S.stl
  • 4. FLAT XS.stl
  • 5. ROUND M.stl
  • 6. ROUND S.stl
  • 7. FLAT 45 L.stl
  • 8. FLAT 45 M.stl
  • 9. FLAT 45 S.stl

Learn more about the formats
Publication date 2025-03-09 at 01:17
Design number 2805725
Only3D

Only3D

Issue with this design? Report a problem.

3D printer file info

3D model description

3D printable toolkit for sanding and polishing. With the tools, we perform sanding and polishing operations on the part. With the templates, we cut sandpaper and polishing foam in suitable sizes for the tools. The numbers and names of the tools in the toolkit are included. Within the system, teams are matched with these numbers and names.

Recommended table positions and print settings are included. Using recommended settings is important for optimum printing. For print speeds, the values that each printer can print on average are given. You can print at a faster print speed depending on the printer quality. There is no direct definite limit. It is generally preferred to print at maximum speed with average quality and make it ready for application quickly.

3D printing settings

Stick nΒΊ 1-12
Nozzle diameter: 0.4mm
layer height: 0.2mm
wall line count: 5
wall ordering: inside to outside
wall Z seam position: back left
top layers: 5
bottom layers: 3
top/bottom pattern: lines (Y axis)
top/bottom skin overlap: %30
infill density: %30
infill pattern: grid
flow: 0.4mm wall calibrated
infill speed: 40mm/s
wall speed: 28mm/s
top/bottom speed: 28mm/s
travel speed: 70mm/s
minimum layer time: 12s
minimum speed: 5mm/s
build plate adhesion type: brim
brim line count: 12
: disable

Stick nΒΊ 13-14
Nozzle diameter: 0.4mm
layer height: 0.2mm
wall line count: 5
wall ordering: inside to outside
wall Z seam position: back left
top layers: 5
bottom layers: 3
top/bottom pattern: lines (Y axis)
top/bottom skin overlap: %30
infill density: %30
infill pattern: grid
flow: 0.4mm wall calibrated
infill speed: 40mm/s
wall speed: 16mm/s
top/bottom speed: 16mm/s
travel speed: 70mm/s
minimum layer time: 30s
minimum speed: 5mm/s
build plate adhesion type: brim
brim line count: 12
: disable

Temp nΒΊ 15-16
Nozzle diameter: 0.4mm
layer height: 0.24mm
wall line count: 8
wall ordering: inside to outside
wall Z seam position: back left
top layers: 4
bottom layers: 4
top/bottom pattern: lines (x axis)
top/bottom skin overlap: %30
infill density: %30
infill pattern: grid
flow: 0.4mm wall calibrated
infill speed: 40mm/s
wall speed: 26mm/s
top/bottom speed: 26mm/s
travel speed: 70mm/s
minimum layer time: 12s
minimum speed: 5mm/s
build plate adhesion type: brim
brim line count: 8
: disable

Temp nΒΊ 17-22
Nozzle diameter: 0.4mm
layer height: 0.2mm
wall line count: 2
wall ordering: inside to outside
wall Z seam position: back left
top layers: 5
bottom layers: 5
top/bottom pattern: lines (45 deg)
top/bottom skin overlap: %30
infill density: %30
infill pattern: grid
flow: 0.4mm wall calibrated
infill speed: 40mm/s
wall speed: 32mm/s
top/bottom speed: 32mm/s
travel speed: 70mm/s
minimum layer time: 12s
minimum speed: 5mm/s
build plate adhesion type: brim
brim line count: 8
: disable

Stick Toolkit Box
Nozzle diameter: 0.4mm
layer height: 0.24mm
wall line count: 2
wall ordering: inside to outside
wall Z seam position: back left
top layers: 6
bottom layers: 4
top/bottom pattern: lines (X axis)
top/bottom skin overlap: %30
infill density: %5
infill pattern: grid
flow: 0.4mm wall calibrated
infill speed: 45mm/s
wall speed: 32mm/s
top/bottom speed: 32mm/s
travel speed: 70mm/s
minimum layer time: 30s
minimum speed: 32mm/s
build plate adhesion type: brim
brim line count: 8
: disable

Categories

People

Tags

Advertising

Page translated by automatic translation. See the original version.

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.