Majora's Mask, MMU and single extuder

Majora’s Mask

I am including two sets of files to give you more print options. If you want to print the parts separately then assemble together, use the files without MMU in the beginning of the name. If you have a printer capable of printing up to 4 or more colors, use the MMU files included to print more than one color at a time.

The difference between the two file sets is that there will be clearances between parts when using the single extruder files, this allows the parts to be printed out separately. With small clearances between the parts, it ensures that one piece will fit into the other without issue.

There are also 3MF files for Bambu printers included, I recommend loading these into your slicer and making adjustments as you need.
I tried to eliminate the need for s on many of the pieces, but unfortunately, s will be necessary on a couple of the pieces. It is important to the orange cut out area on the top of the mask and the underside of the mask as well.

To get the blended glowing eye look I designed it to be printed with a Bambu 4 color AMS. Printing with a thin layer height of 0.12 allows the previous layer to be slightly visible through the top layer. By alternating layers of two colors, it creates a blended look of the two colors. Certain filaments have a slightly transparent properties, like the Sunlu PLA Plus, I used to print the eyes seen in some of the photos.

Assembly should be self-explanatory as the pieces will only fit together in one order, I do recommend printing out all the pieces, then dry fitting each piece in place before gluing any pieces together.

If you like this design and want some more information on how I designed this, or interested in selling prints of any of my designs, please check out my patreon here,

https://www.patreon.com/planpa3d