Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget

Model Update - 9/24/2024
Be sure to check out the updated Bony Basilisk V2 FREE on Thangs through 9/26/2024 to celebrate 1 year of Snap-Flex

A few folks requested a longer version of the spine. I've added Skele-Spine_SnapFlexV2_Long

Because this spine is longer, it doesn't quite fit all the way into the cloak while all of the segments are unlocked.

I suggest locking the ts in the following arrangement to fit it into the cloak:
Lock together vertabrae 2-5
Lock together vertabrae 6-9

Model Update - 9/23/2024

Due to popular demand, I've thickened the walls of the Reaper Cloak for improved printability.

I'm very sorry for any trouble that the thin walls might have caused you.

I am including 2 new versions of the Reaper Cloak with thicker walls:

1. ReaperCloak_WallsThickened is basically the same, but with a few extra walls for the fabric on the body and the sleeves

2. ReaperCloak_Thickest has the same overall shape with thicker walls, however I've also removed the gaps between the dangling sleeves and the body for an even easier and quicker print

Special thanks to 3D_Prince for working with me to refine the Reaper Cloak for printability

I am also including a new version of the Skele-Spine:

Skele-Spine_SnapFlexV2 is the new version with increased surface with the build plate + a more durable Snap-Flex 2.0 locking t. If this version of the t seems too tight at first, wiggle it side-to-side in the locked position a few times to loosen the t. It should relax to a reasonable tightness after a few snaps.

I also plan to release a few more updates for this model with longer versions of the Spine after I complete more testing.

Thank you so much for all of your s and !

IF you want to try out my new Snap-Flex 2.0 t in my original Halloween model, you can find the updated Bony Basilisk V2 FREE on Thangs through 9/26/2024 to celebrate 1 year of Snap-Flex.

Print-In-Place, No s, Articulating Fidget Toy

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

Want to try out the latest version of the Snap-Flex lockable flexi t?

Check out my latest articulated model here

#HALLOWEENXCULTS

Arms outstretched, prepared to embrace, the reaper shows his bony face. But do not fear, it's not your time; beneath his cloak, he's just a spine.

This Grim Reaper model is composed of 2 separate pieces. The Reaper Cloak and the Skele-Spine Snap-Flex Fidget.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" t. This allows the Skele-Spine to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a fidgeting experience. Each SNAP will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Skele-Spine is the fifth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

Snap-Flex instructions:
Push segments together to lock them
Pull segments apart to unlock them

If the ts are too tight at first, flex them side-to-side while locked in order to loosen the ts. The ts will also loosen normally to an appropriate level through repeated use.

Tolerance:
To accommodate different printer settings and filaments, I’m ing 3 different tolerance levels for the Skele-Spine to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the Medium tolerance model. For the other tolerances, please check out the other versions of the model below:

Tight, Medium, and Loose Tolerance Grim Reaper:
https://www.mimetics3d.com/models/grim-reaper

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

For a posable, Snap-Flex articulated dragon, check out Snowstorm:
https://www.mimetics3d.com/models/snowstorm

Check out the latest articulated dragon Snap-Flex model here:

For another spooky snap flex fidget, check out my latest creation here:

Print Settings:
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No s, Print-In-Place at 100% scale. Going any smaller may disable the Snap-Flex t.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.